Sanyo Pdg Dsu30 Projector User Manual

							20
English
User Controls
IMAGE
 Image Mode
  There are many factory presets optimized for various types of im-
ages. Use the  or  to select the item. 
  Presentation: For computer or notebook.
  Bright: For bright room.
  Movie: For home theater.
  sRGB: For standard color.
   Blackboard: This mode should be selected to achieve optimum 
color settings when projecting onto a blackboard (green).
   Classroom: This mode is recommended for projecting in a class-
room.
  User1/User2: Memorize user’s settings.
  Brightness
 Adjust the brightness of the image.
  Press the  to darken image.
  Press the  to lighten the image.
 Contrast
  The contrast controls the degree of difference between the lightest 
and darkest parts of the picture. Adjusting the contrast changes the 
amount of black and white in the image.
  Press the  to decrease the contrast.
  Press the  to increase the contrast. 
						

							English
21
English
User Controls
 Sharpness
 Adjust the sharpness of the image.
  Press the  to decrease the sharpness.
  Press the  to increase the sharpness.
 Saturation
  Adjust a video image from black and white to fully saturated color.
  Press the  to decrease the amount of color in the image.
  Press the  to increase the amount of color in the image. 
 Tint
 Adjust the color balance of red and green.
  Press the  to increase the amount of green in the image.
  Press the  to increase the amount of red in the image.
“Sharpness”, “Saturation” and “Tint” functions are only supported under Video mode.
Note 
						

							22
English
User Controls
IMAGE | Advanced
 Gamma
  This allows you to choose a gamma table that has been fine-tuned to 
bring out the best image quality for the input.
  Film: For home theater.
  Video: For video or TV source.
  Graphics: For image source.
  PC: For computer or notebook.
 BrilliantColorTM
    Produces an expanded onscreen color spectrum that delivers en-
hanced color saturation for bright, true-to-life images.
 Color Temp.
  Adjust the color temperature. At higher temperature, the screen 
looks colder; at lower temperature, the screen looks warmer.
 Color Space
  Select an appropriate color matrix type from AUTO, RGB or YUV. 
						

							English
23
English
User Controls
 Color
  Use these settings for advanced adjustment of the individual Red, 
Green, Blue, Cyan, Magenta and Yellow Colors.
 Reset
 Choose “Yes” to return the factory default settings for “Color” 
menu.
IMAGE | Advanced 
| Color
IMAGE | Advanced | 
Input
 Input
 Use this option to enable / disable input sources. Press  to enter 
the sub menu and select which sources you require. Press “Enter” 
to finalize the selection. The projector will not search for inputs that 
are not selected. (p.30) 
						

							24
English
User Controls
SCREEN
 Aspect Ratio
 Use this function to choose your desired aspect ratio.
   4:3: This format is for 4×3 input sources not enhanced for Wide-
screen TV. 
   16:9-I: This format is for 16×9 input sources, like HDTV and 
DVD enhanced for Wide screen TV. (576i/p)
   16:9-II: This format is for 16×9 input sources, like HDTV and 
DVD enhanced for Wide screen TV. (480i/p)
   Native: This format displays the original image without any scal-
ing.
   AUTO: Automatically selects the appropriate display format.
Aspect ratio
(source detected) 
Resize image
SVGA model
4:3800 x 600 center
16:9-I800 x 450 center
16:9-II854 x 480 catch
800 x 480 center 
Native1:1 mapping center
  Overscan
    Overscan function removes the noise in a video image. Overscan the 
image to remove video encoding noise on the edge of video source. 
						

							English
25
English
User Controls
 D. zoom
 Adjust the size of projector’s display area.
   Press the  to reduce the size of an image on the projection 
screen.
  Press the  to magnify an image on the projection screen.
 H Image Shift
  Shift the projected image position horizontally.
 V Image Shift
  Shift the projected image position vertically.
 V Keystone
  Press the  or  to adjust image distortion vertically and makes a 
rectangular image. 
						

							26
English
User Controls
SETTING | 
Language
 Language
 
Choose the multilingual OSD. Press  into the sub menu and then 
use the  or  or  or  key to select your preferred language. 
Press “ENTER” to finalize the selection. 
SETTING
 Mounting
    Front-Desktop
      The factory default setting. The image is projected straight on the 
screen.
    Rear-Desktop
      When you select this function, the projector reverses the image 
so you can project behind a translucent screen.
    Front-Ceiling
      When you select this function, the projector turns the image 
upside down for ceiling-mounted projection. 
						

							English
27
English
User Controls
   Rear-Ceiling
      When you select this function, the projector reverses and turns 
the image upside down at same time. You can project from be-
hind a translucent screen with ceiling mounted projection.
 Menu Location
 
Choose the menu location on the display screen.
 Mute
  Choose “On” to mute the volume.
  Choose “Off” to restore the volume.
 Volume
  Press the  to decrease the volume.
  Press the  to increase the volume. 
						

							28
English
User Controls
SETTING | 
Signal
 Fine Sync
  
Eliminate flicker from the image displayed. Use the  or  to adjust 
the value. 
 Total Dots
   Adjust the number of total dots in one horizontal period. Use the  
or  to adjust number to match your PC image. 
 H. Position (Horizontal Position)
  Press the  to move the image left.
  Press the  to move the image right.
 V. Position (Vertical Position)
  Press the  to move the image down.
  Press the  to move the image up.
“Signal” is only sup-ported in Analog VGA (RGB) signal.
Note 
						

							English
29
English
User Controls
SETTING | 
Advanced
 Logo
Use this function to set the desired startup screen. If changes are 
made they will take effect the next time the projector is powered on.
 On: SANYO startup screen.
 Off: No logo is displayed.