Sanyo Pdg Dsu30 Projector User Manual
Have a look at the manual Sanyo Pdg Dsu30 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 46
English
45
English
Appendices
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countr\
ies and
do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and compo-
nents which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accu-
mulators, at their end-of-life, should be disposed of separately from your household
waste.
Note:
If a chemical symbol...](http://img.usermanuals.tech/thumb/67/95854/w64_sanyo-pdg-dsu30-manual_d-45.png "Page 46
English
45
English
Appendices
FOR EU USERS
The symbol mark and recycling systems described below apply to EU countr\
ies and
do not apply to countries in other areas of the world.
Your product is designed and manufactured with high quality materials and compo-
nents which can be recycled and/or reused.
The symbol mark means that electrical and electronic equipment, batteries and accu-
mulators, at their end-of-life, should be disposed of separately from your household
waste.
Note:
If a chemical symbol...")
![Page 49
48
English
Appendices
Status Read Command
Format
The command is sent from PC to the projector with the format below;
‘CR’ [Command] ‘CR’
Command: one character (refer to the command table below.
■ The projector decodes the command and returns the ‘Character
string’ with the format below;
CommandFunctionProjectorReturnProjector status
CR0Status Read00Power ON
80Standby mode
CR1Input Mode Read
CR3Lamp Time Read
CR4Setting Read
The tables on pages 46~48 show the typical command lists for con-trolling...](http://img.usermanuals.tech/thumb/67/95854/w64_sanyo-pdg-dsu30-manual_d-48.png "Page 49
48
English
Appendices
Status Read Command
Format
The command is sent from PC to the projector with the format below;
‘CR’ [Command] ‘CR’
Command: one character (refer to the command table below.
■ The projector decodes the command and returns the ‘Character
string’ with the format below;
CommandFunctionProjectorReturnProjector status
CR0Status Read00Power ON
80Standby mode
CR1Input Mode Read
CR3Lamp Time Read
CR4Setting Read
The tables on pages 46~48 show the typical command lists for con-trolling...")
