Sanyo LNS-T03 Installation Manual

LENS REPLACEMENT AND INSTALLATION PROCEDURE{Type (1) Cabinet}
-2-
1
Remove 2 Screws A and Remove Lower Lens
Cover. Push part B and pull the Lower Lens
Cover down and remove it. (See Fig. 1.)
2  
Remove 4 Screws C. Pull the Upper Lens Cover
toward front and remove it. (See Fig. 2.)
3  
Remove 2 Screws D and Cover Plate from the
back of the Upper Lens Cover. (See Fig. 3.)
A
C
C
B
Fig-3
Fig-1
Fig-2
UPPER LENS
COVER 
COVER PLATE
UPPER LENS
COVER 
LOWER LENS
COVER 
D 

-3- LENS LOCK RELEASE
Fig-4
LENS LOCK 
4  
Remove Lens Protection Cap from the rear (mounting side) of the Projection Lens and attach the
lens Attachment to the lens with 4 Screws. (Use screws attached to the lens.) See Fig. 4.
5  
Grasp (release lock) the Lens Lock Lever and turn it fully upward. (See Fig. 6)
Mount the Lens into the lens mounting bracket and grasp the lens lock lever and turn it counter-
clockwise until the lever is locked. (See Fig. 5 and 7)
After installing the lens, make sure the...

-4-
7  
Put back the Upper Lens Cover to the projector and Fix the Upper Lens Cover with 4 Screws C.
(See Fig. 2.) Put back the Lower Lens Cover to the projector. Fix the Lower Cover with 2 Screws A.
(See Fig. 1.)
Fig-8
LOWER LENS
COVER 
UPPER LENS
COVER  

LENS REPLACEMENT AND INSTALLATION PROCEDURE{Type (2) Cabinet}
-5-
2  
Remove 4 Screws C. Pull the Lower Lens Cover
toward front and remove it. (See Fig. 2.)
3  
Remove 2 Screws D and Cover Plate from the
back of the Upper Lens Cover. (See Fig. 3.)
Fig-1
UPPER LENS
COVER 
Fig-2
LOWER LENS
COVER 
C
COVER PLATE
UPPER LENS
COVER 
D
Fig-3
C
B
A
1
Remove 2 Screws A and Remove Upper Lens
Cover. Push part B and pull the Upper Lens
Cover up and remove it. (See Fig. 1.) 

-6-
LENS LOCK RELEASE
Part No. (610 275 6029)Fig-4
LENS LOCK 
4  
Remove Lens Protection Cap from the rear (mounting side) of the Projection Lens and attach the
lens Attachment to the lens with 4 Screws. (Use screws attached to the lens.) See Fig. 4.
5  
Grasp (release lock) the Lens Lock Lever and turn it fully upward. (See Fig. 6)
Mount the Lens into the lens mounting bracket and grasp the lens lock lever and turn it counter-
clockwise until the lever is locked. (See Fig. 5 and 7)
After installing the...

-7-
Fig-8
LOWER LENS
COVER 
UPPER LENS
COVER 
7  
Put back the Lower Lens Cover to the projector and Fix the Lower Lens Cover with 4 Screws C.
(See Fig. 2.) Put back the Upper Lens Cover to the projector. Fix the Upper Cover with 2 Screws A.
(See Fig. 1.)