Samsung Television UNES7150 User Manual
Have a look at the manual Samsung Television UNES7150 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
possible from the 3D Active Glasses. The 3D images don’t look quite right. The ideal viewing distance is three times or more the height of the screen. We also recommend sitting with your eyes level with the screen. The batteries in the 3D glasses don’t last Turn off 3D glasses while not using them. If you leave 3D glasses on, battery lifespan is shortened.
Anynet+ (HDMI-CEC) (Troubleshooting) Anynet+ does not work. Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. You can connect only one receiver (home theater). Check if the Anynet+ device power cord is properly connected. Check the Anynet+ device’s Video/ Audio/HDMI cable connections.
Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. Check whether the TV remote control is in TV mode. Check whether the remote control is Anynet+ compatible. Anynet+ doesn’t work in certain situations. (Searching channels, operating Smart Hub or Setup, etc.) If you have removed and then reconnected the HDMI cable, please
make sure to search devices again or turn your TV off and on again. I want to start Anynet+. Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On. (System → Anynet+ (HDMI-CEC) ) Open the Tools menu using your remote and then select Anynet+ (HDMI- CEC) . Then select a menu you want. I want to exit Anynet+.
Select View TV in the Anynet+ menu. Go to the Source screen using your remote and select a non-Anynet+ device. The message Connecting to Anynet+ device ... appears on the screen. You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Use the remote control after the TV has completed Anynet+ configuration or
has finished switching to Anynet+. The Anynet+ device does not play. You cannot use the play function when Setup is in progress. The connected device is not displayed. Check whether or not the device supports Anynet+ functions. Check whether or not the HDMI cable is properly connected. Check whether Anynet+ (HDMI-CEC) is set to On. ( System → Anynet+ (HDMI-
CEC)) Search Anynet+ devices again. Anynet+ requires an HDMI connection. Make sure the device is connected to your TV with an HDMI cable. Some HDMI cables may not support Anynet+ functions. If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please repeat the device scan.
The TV sound is not output through the receiver.Connect the optical cable between TV and the receiver. for LED 6100 ― 7150 Series and PDP TV The ARC function enables digital output of sound using the HDMI IN 2(ARC) port and can only be operated when the TV is connected to an audio receiver that supports the ARC function.
AllShare Play (Troubleshooting) This file may not be playable properly. This may appear because of the high bit rate of the content. Content generally will play but could experience some playability issue.
Smart Hub (Troubleshooting) Some application contents only appear in English. How can I change the language? The Application content language may be different from the application user interface language. The ability to change the language depends on the service provider. Some application services do not work. Check with the service provider. Refer to the help website for application