Samsung Television UNES7150 User Manual

							 
NIf  Plug & Access does not connect 
your TV to your wireless router, 
a popup screen appears on the 
screen notifying you of the failure. 
If you want to try using  Plug & 
Access again, disconnect the USB 
memory stick, reset the router, and 
then try again from Step 1. You 
can also choose one of the other 
connection setup methods.
5.  
The network connection screen  
						

							appears, and the network setup is 
done.
 
NIf the wireless router’s settings 
change or you install a new wireless 
router, you must perform the Plug & 
Access procedure again, beginning 
from Step 1.
Network Status
Menu  → Network
 
→  Network Status
You can check the current network and  
						

							Internet status.
If the wireless network connection failed...
 
●Wireless network connection failed.
No wireless router selected. Go to 
Network Settings to select your router.
 
●Unable to connect to wireless router.
Try the following: check if the router 
is turned on, and if it is, try turning it 
off and on again. Check if you need to 
enter a security key to use the router.
 
●IP auto setting failed. 
						

							Try the following to set your IP address 
automatically or set your IP address 
manually by selecting IP Settings. 
1.) Ensure that DHCP server is enabled 
on the router. 2.) Unplug and re-plug-
in the router. 3.) Contact your Internet 
Service Provider for more information.
 
●Unable to connect to the network.
Try the following: check if your IP 
address is set correctly in  IP Settings. 
Contact your Internet Service Provider  
						

							for more information.
 
●Connected to your local network, but 
cannot connect to the Internet.
Check the DNS settings in IP Settings, 
or contact your Internet Service 
Provider to access the Internet.
 
●Network setup complete, but cannot 
connect to the Internet.
Contact your Internet Service Provider 
to access the Internet. 
						

							Managing the Network Connected Devices
Wi-Fi Direct
Menu  → Network
 
→  Wi-Fi Direct
Set to connect the TV to wireless 
mobile devices. Using this function, you 
can connect wireless mobile devices to 
your TV directly without a router.
 
NTo use this function, your mobile 
device should be supported by the 
Wi-Fi Direct.
To connect your mobile device with  
						

							your TV using Wi-Fi Direct, follow 
these steps:1.  
Turn on the Wi-Fi Direct device and 
activate its Wi-Fi Direct function.
2.  
Go to the Wi-Fi Direct screen 
(Network  
→  Wi-Fi Direct). The TV 
starts to search for devices, and then 
displays the devices on the Wi-Fi 
Direct  screen.
3.  Select the desired Wi-Fi device.
4.  
On the Wi-Fi device: 
						

							 
– For 
PBC: Press the WPS(PBC) 
button on your Wi-Fi device 
within 2 minutes. The Connecting 
popup appears, followed by 
the Connected pop-up. When it 
closes, you should see the device 
listed on the Wi-Fi Direct screen 
as connected.
 
– For 
PIN: Input the displayed PIN 
on your device. The Connecting 
popup appears, followed by  
						

							the Connected pop-up. When it 
closes, you should see the device 
listed on the Wi-Fi Direct screen 
as connected.
 
NIf you want to disconnect the device, 
select the connected Wi-Fi device, 
and then select Disconnect.
Soft AP
Menu  → Network
 
→  Soft AP
Using this function, you can connect 
the TV to your mobile devices if your  
						

							mobile devices do not support Wi-Fi 
Direct.
The Soft AP screen lets you set the 
options for connecting Wi-Fi devices.
 
●Soft AP
Turns Soft AP on or off. When Soft AP 
is set to On, your mobile devices can 
find the TV's network name in their Wi-
Fi connection list.
 
●Security key
Enter a Security key at least 9