Samsung Television UNES7150 User Manual

							function1. 
To stop the Clear Scrambled Channel 
function, select Stop.
2.  
The  message  Stop searching for 
scrambled channels? appears. Select 
Ye s .
3.  
The  Clear Scrambled Channel 
function stops.
Fine Tune
Menu  → Channel 
→ Fine Tune
(analog channels only) 
						

							If the reception is clear, you do not 
have to fine tune the channel, as this is 
done automatically during the search 
and store operation. If the signal is 
weak or distorted, fine tune the channel 
manually. Scroll to the left or right until 
the image is clear.
 
NSelect the channel, and then select 
Fine Tune.
 
NFine tuned channels that have been 
saved are marked with an asterisk “*”  
						

							on the right-hand side of the channel 
number in the channel banner.
 
NTo reset fine-tuning, select the 
channel, select Fine Tune, and then 
select  Reset on the Fine Tune screen. 
						

							Changing the Preset Picture ModePicture Mode
Menu  → Picture 
→ Picture Mode
Picture modes apply preset adjustments 
to the picture.
 
NWhen your TV is connected to a PC 
via an HDMI to DVI cable, you can 
only select Entertain  and Standard .
 
●Dynamic
Brightens the screen. Suitable for a 
bright room.
Basic Feature 
						

							 
●Standard
Suitable for a normal environment.
 
●Natural  for LED TV  /  Relax  for PDP 6500 
Series and above 
Suitable for reducing eye strain.
 
●Movie
Darkens the screen, making it less 
glary. Suitable for watching movies in a 
darkened room.
 
●Entertain
Sharpens the picture. Suitable for  
						

							games.
 
NOnly available when the TV is 
connected to a PC via an HDMI to 
DVI and an HDMI to HDMI cables. 
						

							Adjusting Picture SettingsBacklight  
 for LED TV  / Cell Light  for PDP TV 
Menu 
→ Picture 
→ Backlight
 / Cell Light
Adjusts the brightness of the screen 
by adjusting the brightness of the 
individual pixels.
Contrast
Menu  → Picture 
→ Contrast
Increases or decreases the contrast 
between dark and light areas of the 
picture. 
						

							Brightness
Menu  → Picture 
→ Brightness
Adjusts the brightness of the screen. 
Not as effective as  Backlight / Cell 
Light.
Sharpness
Menu  → Picture 
→ Sharpness
Sharpens or dulls the edges of objects.
Color
Menu  → Picture 
→ Color
Adjusts the color saturation. The higher  
						

							the Color setting, the more intense the 
color. Low settings remove color and 
the picture becomes black, white, and 
gray.
Tint (G/R)
Menu  → Picture 
→ Tint (G/R)
Adjusts the amount of green and red in 
the picture. As you increase the amount 
of green, the amount of red decreases 
and vice versa.
To adjust picture quality, follow these steps: 
						

							1. 
Select an option you want to adjust. 
When you select an option, a slider 
screen appears.
2.  
Adjust the option value using your 
remote.
 
NWhen you change an option value, 
the change will affect the OSD menu 
also.
 
NWhen your TV is connected to a PC 
via an HDMI to DVI cable, Color and 
Tint (G/R)  are not available.