Samsung Television UNES7150 User Manual

							connection.
3.  
When the connection has been 
verified, the " You are connected 
to the Internet. If you have any 
problems using online services, 
please contact your Internet Service 
Provider."  message appears. Select 
OK.
 
NIf the connection process fails, check 
the LAN port connection.
 
NIf the automatic process cannot find  
						

							the network connection values or 
if you want to set the connection 
manually, go to the next section, 
"Manual Network Setup."
Manual Wired Network Setup You can configure your TV's wired 
network connection manually when 
connecting your TV to a network that 
requires a Static IP address.
 
NTo get the IP address, subnet mask, 
gateway, and DNS values, contact  
						

							your Internet Service Provider (ISP).
To set up your TV's wired network 
connection manually, follow these 
steps: 1.  
Go to the Network Settings screen. 
(Network  
→  Network Settings)
2.  
Select  Start. The network connection 
screen appears and the verification 
process starts.
3.  
Select  Stop. The verification process 
stops. Select IP Settings on the  
						

							network connection screen. The IP 
Settings screen appears.
4.  
Select  the  IP Mode, and then set the 
IP Mode  to Enter manually .
5.  
Go to the IP Address entry field, and 
then select the IP Address using the 
remote.
6.  
Enter the first portion of the IP 
Address (for example, 105) into the 
first entry field using your remote. 
When done, go to the next field. 
						

							7. 
Enter the next portion of the IP 
Address. When done, go to the next 
field.
8.  
Repeat the entry process for each 
field in the IP Address.
 
NIf you make a mistake when 
entering a number, re-enter the 
number to correct it.
9.  
When done, go to the Subnet Mask 
fields.
10.  
Repeat the same entry process for  
						

							Subnet Mask, Gateway, and DNS 
Server .
11.  
When done, select OK. The network 
test screen appears and the 
verification process starts. When the 
connection has been verified, the 
"You are connected to the Internet. If 
you have any problems using online 
services, please contact your Internet 
Service Provider. " message appears. 
Select OK. 
						

							Network Status
Menu  → Network
 
→  Network Status
You can check the current network and 
Internet status.
If the wired network connection failed...
 
●No network cable found.
Check if your network cable is plugged 
in. If it is connected, make sure that 
the router is turned on. If it is on, try 
turning if off and on again.
 
●IP auto setting failed. 
						

							Try the following to set your IP address 
automatically or set your IP address 
manually by selecting IP Settings.
1.) Ensure that DHCP server is enabled 
on the router. 2) Unplug and re-plug-
in the router. 3) Contact your Internet 
Service Provider for more information.
 
●Unable to connect to the network.
Try the following: check if your IP 
address is set correctly in  IP Settings. 
Contact your Internet Service Provider  
						

							for more information.
 
●Connected to your local network, but 
cannot connect to the Internet.
Check the DNS settings in IP Settings 
or contact your Internet Service 
Provider to access the Internet.
 
●Network setup complete, but cannot 
connect to the Internet.
Contact your Internet Service Provider 
to access the Internet. 
						

							Setting up a Wireless NetworkNetwork Settings
Menu  → Network
 
→  Network Settings
Set up the wireless network connection 
so you can use various Internet services 
such as  Smart Hub  and AllShare Play  
and perform software upgrades.
Automatic Wireless Network Setup Most wireless networks have an 
optional security system that requires 
devices that access the network to