Samsung Television UNES7150 User Manual

							and the Added Ch.  list. / On the  Program 
View  screen, displays the programs for 
the next or previous channel.
 
●E  Wa t c h
 / Information
Displays the channel you selected. / 
Displays details of the selected channel.
 
●k  Page
Scrolls the Channel List to the next or 
previous page.
 
NThese correspond to the channel 
buttons on your remote. 
						

							 Display Icons Used in the Channel List 
screens 
: An analog channel.
 
: A reserved program.
 
: A locked channel.
Using Schedule Viewing  in Channel List 
(digital channels only)
 You can use Schedule Viewing in 
Channel List to schedule a digital 
channel program for viewing. The TV 
will turn on and display the digital  
						

							channel program when the program 
begins.1.  
Press the CH LIST button. The 
Channel List screen appears.
2.  
Select a desired digital channel.
3.  
Select 
{ using your remote. The 
TV displays the program list of the 
selected channel.
4.  
Select a desired program in the 
program list, and then select 
Information using your remote. 
						

							5. 
On  the  Information screen, select 
Schedule Viewing. The selected 
program is scheduled. 
 
NIf you want to cancel the Schedule 
Viewing, follow Steps 1 through 4, 
and then select Cancel Schedule. 
						

							Memorizing ChannelsAntenna
Menu  → Channel 
→ Antenna
Before your television can memorize 
the available channels, you must select 
your TV's signal source, Air  (using 
an antenna) or Cable. After you have 
selected the signal source, go on to the 
Auto Program function.
 
NSelecting the signal source using the 
Antenna  function also determines  
						

							the signal source the TV is tuned to. 
For example, if you receive your TV 
signal over the air, and you select 
Cable, you will see only snow. You 
must select Air to see a picture.
Auto Program
Menu  → Channel 
→ Auto Program
The Auto Program function memorizes 
all channels that are available over the 
air or through your cable system and 
adds them to the Channel list. 
						

							To start the Auto Program, follow these 
steps:1.  
Go to the Auto Program menu.
2.  
Select  Air or Cable or both, and then 
select  Next. A 
c mark appears in 
the check box.
 
NIf you selected  Air or Cable in the 
Antenna  menu, your choice will 
already be selected.
3.  
If you selected  Cable, the cable 
system screen appears. Select  Digital  
						

							Cable System.
 
NIf you selected  Air only, the Auto 
Program starts.
4.
  Select the correct cable signal format 
-  STD, HRC or  IRC.
 
NMost cable systems use STD 
(Standard).
5.  
Repeat  for  Analog Cable System .
6.  
Select  Next. The Auto Program 
starts.
 
NAfter all the available channels are  
						

							stored, the Auto Program removes 
scrambled channels. When done, 
the Auto Program menu then 
reappears. This process can take 
up to 30 minutes. 
						

							Other FeaturesClear Scrambled Channel
Menu  → Channel 
→ Clear Scrambled 
Channel
This function filters out scrambled 
channels after the Auto Program is 
completed. This process may take up 
to 30 minutes.
 
NThis function is only available in 
Cable mode.
How to Stop the Clear Scrambled Channel