Samsung Television UNES7150 User Manual

							Setup: Select Off, Once, Everyday, 
Mon~Fri, Mon~Sat, Sat~Sun or  Manual. 
If you select Manual, you can select the 
days you want to activate the timer.
 
NThe  c mark indicates days you’ve 
selected.
Time: Set the time that the TV turns on 
automatically.
Volume: Set the desired loudness.
Source: To select the source of the 
content that will play when the TV  
						

							turns on. You can: 
– Select TV
 and have the TV display a 
specific air or cable channel.
 
– Select USB and have the TV play 
back photo or audio files from a USB 
device.
 
– Select a source on your TV (HDMI1, 
HDMI2, Component, etc.) that you 
have connected a set-top box to, and 
have the TV display a channel from 
the set-top box. 
						

							 
NThe USB device must be connected 
to your TV before you can select 
USB.
 
NIf you select a source other than  TV 
or  USB, you must:
 
ΠHave a cable or satellite set-top 
box attached to that source.
 
ΠSet the set-top box to the 
channel you want to watch when 
the TV goes on.
 
ΠLeave the set-top box turned on. 
						

							 
NWhen you select a source other than 
TV  or USB, the Antenna  and Channel 
options will disappear.
Antenna  (when the Source is set to 
TV ): Select Air  or Cable.
Channel (when the Source is set to  TV): 
Select the desired channel.
Music /  Photo (when the Source is 
set to USB): Select a folder in a USB 
device that contains music that you 
want played when the TV turns on  
						

							automatically or a folder that contains 
music and a folder that contains photo 
files. If you select both, the TV will 
display the photos you selected as it 
plays the music you selected.
To select folders on a USB device, 
follow these steps:1.  
Select  Music. The TV displays 
types or names of the attached USB 
devices. If you have more than one 
USB device attached, the TV lists all  
						

							the devices.
2.
  Select the type or name of the device 
you want to play. A list of folders on 
the selected device appears.
 
NIf there are no folders on your 
device, highlight and select the 
Select  button to the right of the 
device name. The Timer screen 
re-appears with the name of the 
device in the Music field. Go to 
Step 4. 
						

							3. 
Highlight a folder that contains 
music, and then highlight and select 
the Select  button next to it. The 
Timer screen re-appears with the 
folder name in the Music field.
4.  
If you want the TV to display photos 
as the music you chose plays, select 
Photos, and then repeat the same 
process.
5.  
When done, select the Close at the 
bottom of the screen. 
						

							 
NYou must select a music file. You 
cannot select only a photo file.
 
NIf there is no music file on the USB 
device or you don’t select a folder 
containing a music file, the Timer 
function does not operate correctly.
 
NIf there is only one photo file in the 
USB, the slide show will not play.
 
NIf a folder name is too long, the 
folder cannot be selected.
 
NEach USB you use is assigned its  
						

							own folder. When using more than 
one of the same type of USB, make 
sure the folders assigned to each 
USB have different names.
 
NWe recommend that you use a USB 
memory stick and a multi card reader 
when using the On Timer .
 
NThe On Timer function may not work 
with USB devices that have a built-
in battery, or with MP3 players or 
PMPs made by some manufacturers  
						

							because the TV can take too long to 
recognize these devices.
 
NIf you set the On Timer to play a file 
saved on a USB HDD, it may take 
up to 40 seconds or more to start 
playing the file after the TV is turned 
on.
 
●Off Timer
Set Off Timer so that your TV turns off 
automatically at a time and on a day 
of your choosing. You can set up three