Samsung Television SyncMaster 400PXn User Manual

							Connecting Digital DVD 
 
Note
• Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using the DVI cable. 
• Then, start the DVD with a DVD disc inserted. 
• Select Digital using the SOURCE button. 
Note
• The monitor has DVI IN connection terminals to connect DVI input devices digital DVD.   
 
Connecting to a VCR
 
1) AV input devices such as VCRs or Camcorders are connected via the  AV IN [VIDEO] or AV IN [S-VIDEO]  
of the LCD Display using an S-VHS or BNC cable.
2) Connect the Audio (L) and Audio (R) terminals of a VCR or Camcorders to the LCD Display s  AV AUDIO 
IN [L-AUDIO-R]  using audio cables.
3) Select  AV or  S-Video  for a connected VCR or Camcorder using the SOURCE button on the front of the 
LCD Display or on the remote control.
4) Then, start the VCR or Camcorders with a tape inserted. 
Note
• The S-VHS or BNC cable is optional.
   
 
Connecting to a DVD Player
  
						

							1) Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and 
the AUDIO OUT jacks on the DVD player.
2) Connect a Component cable between the  BNC/COMPONENT IN - P
R, Y, PB port on the LCD Display and 
the P
R, Y, PB jacks on the DVD player. 
3) Select  Component  for the connection to a DVD player using the SOURCE button on the front of the LCD 
Display or on the remote control.
4) Then, start the DVD Player with a DVD disc inserted. 
Note
• A component cable is optional.  For an explanation of Component video, consult your DVD manual.
   
 
Connecting to a Camcorder
 
1) Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the  camcorder.  
Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the  AV AUDIO IN 
[L-AUDIO-R]  on the LCD Display.
2) Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the  AV IN [VIDEO] on the 
LCD Display. 
3) Select  AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on 
the remote control.
4) Then, start the Camcorders with a tape inserted. 
Note
• The audio-video cables shown here are usually included with a Camcorder.  
						

							 
(If not, check your local electronics store.)  
If your camcorder is stereo, you need to connect a set of two cables. 
   
 
Connecting to a DTV Set Top Box
 
Note
• The connections for a typical Set Top Box are shown below.
 
1) Connect a Component cable between the  BNC / COMPONENT IN - PR, Y, PB port on the LCD Display and 
the P
R, Y, PB jacks on the Set Top Box. 
2) Connect a set of audio cables between the  COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and 
the AUDIO OUT jacks on the Set Top Box.
3) Select  Component  for the connection to a DTV Set Top Box using the SOURCE button on the front of the 
LCD Display or on the remote control.
Note
• For an explanation of Component video, see your Set Top Box owners manual.
   
 
Connecting Speakers 
 
1) Fasten the SET and the speaker using the screws. * Mount the speaker set without the speaker stand.
2)Connect the speaker connection cable between the speaker connection jack on the back of the SET and  
						

							the speaker connection jack on the back of the speaker.
Note
• Do not move the SET while the SET is connected to the speakers.  
The speaker-bracket for connecting the SET speaker my become damaged.
 
 
Connecting to an Audio System
 
1) Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the AUDIO OUT 
[L-AUDIO-R] on LCD Display.
 
© 1995~2007 SAMSUNG. ALL Right Reserved  
						

							Select Language Main Page
Model
The color and appearance of the product may vary depending on the model, and the product specifications are 
subject to change without prior notice for reasons of performance enhancement. 
Using the Software 
Installation MagicNet
Installation
 1. Insert the installation CD into the CD-ROM drive.  
2. Click the MagicNet installation file.  
3. When the InstallShield Wizard window appears, click Next.  
 
 
4. Select I agree to the terms of the license agreement to accept the terms of use.  
 
 
5. You are required to log in to the MagicNet Server program. Please enter the password to login. The  password cannot be changed when you are logged in.  
Safety Instructions 
Introduction 
Connections 
Using the Software 
Installation MagicNet 
MDC 
MagicNet 
Adjusting the LCD Display  
Troubleshooting 
Specifications 
Information 
Appendix 
 
 
Dodatak 


						

							 
 
6. Choose a folder to install the MagicNet program.  
 
 
7. Click Install.  
 
 
8. The Installation Status window appears.   
						

							 
 
9. It is recommended restarting the system for the normal operation of the MagicNet Server program.   Click Finish.  
 
10. When the installation is complete, the MagicNet executable icon appears on your desktop.  
 
11. Double-click the icon to start the program.  
System Requirements 
 
  CPU  RAM   Ethernet    OS   Application  
Minimum   P1.8  256M  
100M/1G Windows XP  
Windows 2000  
(Service Pack 4)   WMP 9 or later  
Recommended    P3.0Ghz   512M  
 © 1995~2007 SAMSUNG. ALL Right Reserved  
						

							 
 
 
 
Introduction  
 
 
 A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously 
operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and 
a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a 
display.
Main Screen 
 
  Click Start > Program > Samsung > MDC System to start the program. 
  Select a set to see the volume of the selected set within the slider.  
						

							 
  
Main IconsSelect Button
RemoconInfo Grid
Safety LockDisplay Selection
Port SelectionControl Tools 
1. Use the main icons to switch into each screen.
2. Allows you to enable or disable the remote control signal receiving function of the display unit. 
3. Set the Safety Lock function. 
When setting the Lock function, you can only operate power and lock buttons on the remote control and set.
4. The setting for the PC Serial Port can change. The original value is COM1. 
5. Click Select all or Clear to select or clear all displays.
6. Use Grid to view brief information on selected display.
7. Select a display from Display Selection. 
8. Use Control Tools to control displays.
 
The remote control Enable/Disable function operates whether or not the power is On/Off, and this 
applies to all displays connected to the MDC. However, regardless of the status at the time the MDC is 
shut down, the remote control signal receiving function of all displays is initialized to Enable when the 
MDC is closed.
Port Selection  
  
						

							 
 
1. The Multiple Display Control is originally set to COM1.
2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu.
3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will 
be unavailable. 
4. The selected port is stored in the program and used for the next program as well.  
 Power Control 
 
1. Click Power Control of the main icons and the Power Control screen appears.