Samsung Television SyncMaster 400PXn User Manual

							Available Modes
PC / BNC / DVI
AV
S-Video
Component
DVI-Video
MagicNet
MAGICNET 
Moves to the MagicNet OSD screen. 
 
 
MDC 
Moves to the Multi Control OSD screen. 
 
 
LOCK 
Sets the Safety Lock function. 
1) Lock On  
  It will be locked. 
2) Lock Off  
  It wil be unlocked.
Note
• When setting the Lock function, you can only operate the power and lock buttons on the remote control  and set.  
 
The preset password on the LCD Display is 0000.
Note
• Resetting the password for the function key lock.   Press INFO  →
 EXIT  →
 MUTE. The password will be reset to 0000.  The remote control is required for 
resetting the password.
 
 
MagicNet
  
						

							 
Note
• The operating system for this set only supports English so the other languages might be corrupted on the  screen. 
• For MagicNet, a remote control is available for MagicNet. However, it is recommended using a separate  USB keyboard. 
• For MagicNet in Device mode, moving external devices while booting may cause errors. Set up external  devices only if the LCD Display turns on.
• Do not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicNet)  may stop. If you do unplug the cable, restart the system. 
• Do not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program  (MagicNet) may stop. 
• To access other sources, press the SOURCE button in MagicNet.
• The preset password for the LCD Display is 000000.
• The server programs Power-On option works only if the LCD Displays power is completely shut off.  Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down 
since this may cause system errors on the LCD Display.
• In the OSD image of MagicNet, Network mode is the same as Device.
• When using MagicNet with the MagicNet Server Program: perform Network mode. 
• When using MagicNet with the device directly connected to LCD Display : execute Device mode. 
 
 
 
Photo
The JPEG, BMP file format are supported. 
1) Auto 
  Automatically fits the image to the window.
 Original 
  Shows the properties of the original file. 
2) Slide Show 
  Displays the properties of the original file as they are. 
3) Interval 
  Controls the time intervals between image files for a slide show.
 
(5 Sec, 10 Sec, 20 Sec, 30 Sec, 60 Sec)  
						

							4) Rotation 
  Displays an image file by turning it clockwise by 90 degrees.
5) Zoom 
  Displays a reduced picture.
6) Close 
  Closes the image control Menu. 
 
 
Music
The MP3 file format is supported. 
 
 
Movie
The MPEG1, WMV file format are supported. 
1) Play 
  Plays a movie file. 
2) Full Size 
  Plays a movie file in full screen.
 
 
OFFICE / HTML
PPT(Power Point), DOC(MS Word), XLS(MS Excel), PDF, HTML, HTM files are displayed.  
* Install the proper viewer(freeware) program to see the MS Office(Word, Excel, Power Point) or PDF 
doucuments. 
 
 
Internet
Connects to the Internet
 
 
Setup
Sets various functions in MagicNet mode.  
A password must be entered to access Setup mode. 
1) Schedule View
  Displays a schedule.
2) TCP/IP
  Changes the TCP/IP settings.
3) Connection
  Modifies the network settings.
4) Password
  The password can be changed. 
  • The password should be between 6 and 12 characters in numeric format.  
(You should enter a password between 6 and 12 characters in numeric format) 
• If you enter the wrong password three times, the setup configuration is reset and a warning message  appears from the server. 
• If you forget the password, enter Info, 8, 2 and 4 on the remote control to initialize the password. This  
						

							will reset the previous settings of Setup mode. 
5) File
  Local : You can delete or copy files on both local and removable disks.  
6) Play Option
  You can set the repeat play and screen settings.
 Repeat : Determines the repeat option for playing movies and music. 
• None - Select No Repeat to play a movie or tune in the list only once.
• File Repeat - Select Repeat File to play a movie or tune in the list repeatedly.
• List Repeat - Select Repeat List to play movies or tunes in the list in sequence repeatedly.
Rotation - Sets the picture orientation.. • Landscape - Sets the screen resolution to 1366x768 pixels.
• Portrait - Sets the screen resolution to 768x1366 pixels.
EWF(Enhanced Write Filter) : Prevents change to and loss of the data saved on the disk.  • Disable - Disables EWF to allow saved data to be changed data on the protected disk (drive C:). When  switching from the Enable to the Disable state, you can select Commit. 
• Enable - Enables EWF to prevent saved data to be changed on the protected disk (drive C:).
• Commit - Commit the changed data to the protected disk (drive C:) when EWF is in the Enable state.  Commit is not available when EWF is in the Disable state.
  
Notice
• It is highly recommended not to turn off the AC power during an operation. 
Note
• For pivoted monitors, ticker transparency is not supported. 
• For pivoted monitors, a screen resolution of up to 720*480(SD) is supported for movies. 
Note
• For drive D:, EWF is not applied.
• When the contents of Setup have been changed when EWF is in the Enable state, to save the changes in  the disk, you must Commit them.
• By selecting Disable, Enable or Commit, the system is restarted.
© 1995~2007 SAMSUNG. ALL Right Reserved  
						

							Select Language Main Page
Model
The color and appearance of the product may vary depending on the model, and the product specifications are 
subject to change without prior notice for reasons of performance enhancement. 
Adjusting the LCD Display  
Input
 
 
Available Modes
PC / BNC / DVI
AV
S-Video
Component
DVI-Video
Source List 
[MENU] →
 [ENTER]  →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
Use to select PC, BNC, or other external input sources connected to the LCD Display.  
Use to select the screen of your choice.
1) PC
2) BNC
3) DVI
4) AV
5) S-Video
6) Component
[The direct button on the remote control is the SOURCE button.]
Note
• PIP turns off when the LCD Display is switched to an external source.  
Safety Instructions 
Introduction 
Connections 
Using the Software 
Adjusting the LCD Display  
Input 
Picture 
[PC / BNC /DVI Mode]
 
Picture 
[AV / S-Video / 
Component / DVI-Video 
Mode]
 
Sound 
Setup 
Multi Control  
Direct Functions 
Troubleshooting 
Specifications 
Information 
Appendix 
 
 
Dodatak 


						

							 
PIP 
When external A/V devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch 
video from those devices in a small window super-imposed on the PC Video signal. (Off/On) 
Note
• More than one PIP cannot be overlapped on screen as BNC and the component use the same terminal.
 
1) PIP 
  [MENU] 
→
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
  Turns the PIP Screen Off/On.
 
- Off 
- On
 [The direct button on the remote control is the  PIP button.]
2) Source 
 
  [MENU] 
→
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
  Selects the input source for the PIP. 
  - PC : AV / S-Video / Component Mode
  - BNC : AV / S-Video Mode
  - DVI : AV / S-Video / Component Mode 
  - AV / S-Video : PC / BNC / DVI Mode 
  - Component : PC / DVI Mode 
 
[The direct button on the remote control is the  SOURCE button.]
3) Swap 
 
  [MENU] 
→
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
  Swaps the contents of the PIP and main image. 
The image in the PIP window will appear on the main screen, and the main screen image will appear in the 
PIP window. 
 
[The direct button on the remote control is the  SWAP button.]
4) Size 
 
  [MENU]  →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
  Changes the Size of the PIP window.
 
[The direct button on the remote control is the  SIZE button.]
5) Position 
 
  [MENU] 
→
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
  Changes the Position of the PIP window. 
6) Transparency 
 
  [MENU] 
→
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
  Adjusts the Transparency of PIP windows.
 
- High 
- Medium 
- Low 
- Opaque
Note
• If you select  ,  ,   in Size, Position and Transparency will not be activated. 
Available Modes: PIP ON
 
 
Edit Name 
 
[MENU]  →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
Name the input device connected to the input jacks to make your input source selection easier.
1) PC
2) BNC
3) DVI
4) AV 
						

							5) S-Video
6) Component
 
Picture [PC / BNC /DVI Mode]
 
 
Available Modes
PC / BNC / DVI
AV
S-Video
Component
DVI-Video
MagicBright™ 
 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the 
image you are watching.  
Currently four different modes are available: Entertain, Internet, Text and Custom.  
Each mode has its own pre-configured brightness value. You can easily select one of the four settings by 
simply pressing the MagicBright™ control button.
1) Entertain 
  High brightness 
For watching motion pictures such as a DVD or VCD.
2) Internet
 Medium brightness 
For working with a mixture of images such as the text with graphics added. 
3) Text 
 Normal brightness 
For documentations or work involving a lot of text.
4) Custom 
 Although the values are carefully chosen by our engineers, the pre-configured values may not be 
comfortable for your eyes depending on your taste.  
If this is the case, Adjusts the brightness and contrast by using the OSD menu. 
[The direct button on the remote control is the M/B button.]
 
 
Custom 
 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [ENTER]  →
 [∧
 / ∨
] / [< / >]  →
 [ENTER] 
By using the on-screen menus, the contrast and brightness can be changed to your personal preference.  
						

							1) Contrast
 Adjusts the Contrast.
2) Brightness
 Adjusts the Brightness.
Note
• By adjusting the picture using the Custom function, MagicBright will change to Custom mode.
   
 
Color Tone 
 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER] 
The color tones can be changed.
1) Cool 
2) Normal
3) Warm
4) Custom   (Available in PC, BNC mode only)
 
 
Color Control 
 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [ENTER]  →
 [< / >]  →
 [ENTER] 
Adjusts the individual R, G, B color controls. 
(Available in PC, BNC mode only)
1) Red 
2) Green 
3) Blue 
Note
• If you adjust the picture by using the Custom function, Color Tone will turn to the Cusome mode.
   
 
Image Lock 
 
Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with 
jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse 
adjustment and then use Fine again.  
(Available in PC, BNC mode only)
1) Coarse 
  [MENU] 
→
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [ENTER]  →
 [< / >]  →
 [ENTER] 
  Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may 
relocate it to the center using the horizontal control menu. 
2) Fine 
 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
[ENTER]  →
 [< / >]  →
 [ENTER] 
  Removes noise such as horizontal stripes. If the noise persists even after fine tuning, repeat it after 
adjusting the frequency (clock speed). 
3) Position 
 [MENU] 
→
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
[ENTER]  →
 [< / >] / [ ∧
 / ∨
]→
 
[ENTER] 
  Adjusts the screen location horizontally and vertically. 
 
 
Auto Adjustment  
						

							[MENU] →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER] 
The values of Fine, Coarse, Position are adjusted automatically. 
By changing the resolution in the control panel, the auto function is performed. 
(Available in PC, BNC mode only)
[The direct button on the remote control is the AUTO button.]
 
 
Signal Balance 
This is used to make up for the weak RGB signal transmitted by a long signal cable. 
(Available in PC, BNC mode only)  
1) Signal Balance 
 [MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
  Selects either On or Off with the signal control. 
2) Signal Control 
  [MENU] 
→
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 
[ ∧
 / ∨
] →
 [< / >]  →
 [ENTER] 
  Adjusts the R Phase, G Phase, B Phase, Gain and Sharpness manually.
 
 
Size 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]
The Size can be switched. 
1) 16:9 
2) 4:3
 
 
PIP Picture 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / 
∨ ] →
 [ENTER]  →
 [< / >]  →
 [ENTER] 
Adjusts the PIP Screen Settings. 
1) Contrast
  Adjusts the Contrast of the PIP window on the screen. 
2) Brightness
  Adjusts the Brightness of the PIP window on the screen.
3) Sharpness 
  Adjusts the difference between the lightest and darkest areas of the PIP window. 
4) Color 
  Adjusts the Color of the PIP window on the screen. 
5) Tint 
  Adds a natural tone to the PIP window.  
You can view a picture from AV, S-Video through the PIP screen in PC, BNC and DVI (PC) mode. 
Operates only if the video signal is NTSC.
 
Available Modes: PIP ON
 
Picture [ AV / S-Video / Component / DVI-Video Mode]
 
  
						

							Available Modes
PC / BNC / DVI
AV
S-Video
Component
DVI-Video
Mode 
[MENU] →
 [∧
 / ∨
] →
 [ENTER]  →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER] 
The LCD Display has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are 
preset at the factory. 
Dynamic, Standard, Movie, or Custom can be activated.
1) Dynamic
2) Standard
3) Movie
4) Custom
[The direct button on the remote control is the P.MODE button.]
 
 
Custom 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [< / >]  →
 [ENTER] 
By using the on-screen menus, the contrast and brightness can be changed to your personal preference. 
1) Contrast
  Adds a natural tone to the PIP window.
2) Brightness
 Adjusts the Brightness.
3) Sharpness 
  Adjusts the picture Sharpness. 
4) Color 
  Adjusts the picture Color. 
5) Tint 
  Adds a natural tone to the display.  
Operates only for AV and S-Video mode. Operates only if the video signal is NTSC.
 
 
Color Tone 
[MENU]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]  →
 [∧
 / ∨
] →
 [ENTER]