Samsung Television SyncMaster 400PXn User Manual

							1) Connect the power cord for your LCD Display to the power port on the back of the LCD Display.  Trun on the power switch.
2) There are 3 ways to connect the D-sub to your LCD Display.   Choose one of the following: 
2-1) Using the D-sub (Analog) connector on the video card.   Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the  15 pin D-sub 
Port  on the computer. 
2-2) Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the  DVI(HDCP) port on the back of your LCD Display and the  DVI port 
on the computer.  
2-3) Using the BNC (Analog) connector on the video card.  Connect the BNC Cable to the  BNC/COMPONENT IN - R, G, B, H, V ports  on the back of your 
LCD Display and the  15 pin D-sub Port on the computer.  
3) Connect the audio cable for your LCD Display to the audio port on the back of your computer.
4) Turn on both your computer and the LCD Display.
Note
• The DVI cable or BNC cable is optional.  Contact a local Samsung Electronics  Service Center to buy optional items.
 
  
						

							Connecting Digital DVD 
 
Note
• Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using the DVI cable. 
• Then, start the DVD with a DVD disc inserted. 
• Select Digital using the SOURCE button. 
Note
• The monitor has DVI IN connection terminals to connect DVI input devices digital DVD.   
 
Connecting to a VCR
 
1) AV input devices such as VCRs or Camcorders are connected via the  AV IN [VIDEO] or AV IN [S-VIDEO]  
of the LCD Display using an S-VHS or BNC cable.
2) Connect the Audio (L) and Audio (R) terminals of a VCR or Camcorders to the LCD Display s  AV AUDIO 
IN [L-AUDIO-R]  using audio cables.
3) Select  AV or  S-Video  for a connected VCR or Camcorder using the SOURCE button on the front of the 
LCD Display or on the remote control.
4) Then, start the VCR or Camcorders with a tape inserted. 
Note
• The S-VHS or BNC cable is optional.
   
 
Connecting to a DVD Player
  
						

							1) Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and 
the AUDIO OUT jacks on the DVD player.
2) Connect a Component cable between the  BNC/COMPONENT IN - P
R, Y, PB port on the LCD Display and 
the P
R, Y, PB jacks on the DVD player. 
3) Select  Component  for the connection to a DVD player using the SOURCE button on the front of the LCD 
Display or on the remote control.
4) Then, start the DVD Player with a DVD disc inserted. 
Note
• A component cable is optional.  For an explanation of Component video, consult your DVD manual.
   
 
Connecting to a Camcorder
 
1) Locate the A/V output jacks on the camcorder. They are usually found on the side or back of the  camcorder.  
Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the  AV AUDIO IN 
[L-AUDIO-R]  on the LCD Display.
2) Connect a video cable between the VIDEO OUTPUT jack on the camcorder and the  AV IN [VIDEO] on the 
LCD Display. 
3) Select  AV for the Camcorder connection using the SOURCE button on the front of the LCD Display or on 
the remote control.
4) Then, start the Camcorders with a tape inserted. 
Note
• The audio-video cables shown here are usually included with a Camcorder.  
						

							 
(If not, check your local electronics store.)  
If your camcorder is stereo, you need to connect a set of two cables. 
   
 
Connecting to a DTV Set Top Box
 
Note
• The connections for a typical Set Top Box are shown below.
 
1) Connect a set of audio cables between the  COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and 
the AUDIO OUT jacks on the Set Top Box.
2) Connect a Component cable between the  BNC / COMPONENT IN - P
R, Y, PB port on the LCD Display and 
the P
R, Y, PB jacks on the Set Top Box. 
3) Select  Component  for the connection to a DTV Set Top Box using the SOURCE button on the front of the 
LCD Display or on the remote control.
Note
• For an explanation of Component video, see your Set Top Box owners manual.
   
 
Connecting Speakers 
 
1) Fasten the SET and the speaker using the screws. * Mount the speaker set without the speaker stand.
2)Connect the speaker connection cable between the speaker connection jack on the back of the SET and  
						

							the speaker connection jack on the back of the speaker.
Note
• Do not move the SET while the SET is connected to the speakers.   The speaker-bracket for connecting the SET speaker my become damaged.
   
 
Connecting to an Audio System
 
1) Connect a set of audio cables between the AUX L, R jacks on the  AUDIO SYSTEM and the AUDIO OUT 
[L-AUDIO-R]  on LCD Display.
 
 
Connecting a LAN Cable
 
1) Connect the LAN cable. 
 
 
Connecting a USB device
  
						

							1) You can connect USB devices such as a mouse or keyboard. 
 
Using a USB Holder
 
  When using a small external device such as a portable memory stick and it is connected to the USB terminal 
at the back of your monitor, it is exposed to the possiblity of theft or loss. By installing a USB holder after the 
installation of an external device, you can prevent theft or loss.
  
 
  
 
  1) Insert part   of your USB holder into the groove in part   at the back of your monitor. 
  
  
						

							 2) Align part   of your USB holder with the groove at the bottom of part   at the back of your monitor. 
Align part   of your USB holder with the bottom of part   at the back of your monitor. 
  
 
 3) Insert a screw into the groove aligned in step [2], and fasten it. 
 
Align   with   and use a screw to fix them.
© 1995~2007 SAMSUNG. ALL Right Reserved  
						

							Select Language Main Page
Model
The color and appearance of the product may vary depending on the model, and the product specifications are 
subject to change without prior notice for reasons of performance enhancement. 
Connections 
Installing the Stand KIT
 
 
Note
• Only the supplied bolts should be used.
 
Caution
Samsung Electronics will not be responsible for damages caused by using a base other than those 
specified. 
 
Installing the Semi Stand 
 
Left stand Right stand 
Caution
Make sure to install the stand with the Caution label 
folded backwards. 
 
1) A Cover-Protector is used to protect the hole at the bottom of the LCD Display , where the stand is  inserted. Be sure to remove the Cover-Protector when attaching the provided Semi Stand or Stand KIT 
(sold separately) and cover the hole using the  Cover-Hole when attaching the wall mount kit.
2) Set up the left and right stands respectively.
3) Insert the stand into the hole at the bottom of the LCD Display.  Insert the screw into the hole indicated and tighten it. (M4 x L15)
 
Caution
Safety Instructions 
Introduction 
Connections 
Installing the Stand KIT 
Connecting the LCD 
Display 
 
Using the Software 
Adjusting the LCD Display  
Troubleshooting 
Specifications 
Information 
Appendix 
 
 
Dodatak 


						

							This stand is designed for adjusting the screen angle. The company is not responsible for any problem 
caused when using this stand. Under no circumstances use the product as a stand for placing something on. 
 
 
Installing the Stand KIT (sold separately) 
 
1) A Cover-Protector is used to protect the hole at the bottom of the LCD Display , where the stand is  inserted. Be sure to remove the Cover-Protector when attaching the provided Semi Stand or Stand KIT 
(sold separately) and cover the hole using the  Cover-Hole when attaching the wall mount kit.
2) Ensure that the parts are inserted in the right direction and in the right place. (M4 × L15)
3) Insert the stand into the hole at the bottom of the LCD Display.
4) Insert the screw into the hole indicated and tighten it. (M4 × L15)
 
Connecting the LCD Display 
 
 
Using a Power cord with Earth
  In the event of failure, the earth lead may cause electric shock. Make sure to wire the earth lead in 
correctly, before connecting the AC power. When un-wiring the earth lead, make sure to disconnect 
the AC power in advance.
 
Note
• AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected  to the LCD Display. For detailed information on connecting AV input devices, refer to the User Controls 
under Adjusting Your LCD Display.
 
 
Connecting to a Computer
  
						

							1) Connect the power cord for your LCD Display to the power port on the back of the LCD Display.  Trun on the power switch.
2) There are 3 ways to connect the D-sub to your LCD Display.   Choose one of the following: 
2-1) Using the D-sub (Analog) connector on the video card.   Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the  15 pin D-sub 
Port  on the computer. 
2-2) Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the  DVI(HDCP) port on the back of your LCD Display and the  DVI port 
on the computer.  
2-3) Using the BNC (Analog) connector on the video card.  Connect the BNC Cable to the  BNC/COMPONENT IN - R, G, B, H, V ports  on the back of your 
LCD Display and the  15 pin D-sub Port on the computer.  
3) Connect the audio cable for your LCD Display to the audio port on the back of your computer.
4) Turn on both your computer and the LCD Display.
Note
• The DVI cable or BNC cable is optional.  Contact a local Samsung Electronics  Service Center to buy optional items.