Samsung Series 7 User Guide

							81
Using MDC
3
3 Using MDC
3.3.7 Main Screen Layout
 Menu BarChange the status of a display device or the properties of the program.
 Device Category View a list of connected displa
y devices or device groups.
 Schedule Category View a list of schedules for display devices.
 Set List Select the display device you want to adjust.
 Modify the Set List Add, edit, regroup or delete sets.
 Help Topics Display help topics for the program.
4
3
2
16
5
1
2
3
4
5
6 
						

							82
Using MDC
3
3 Using MDC
3.3.8 Menus
You can power on or off a selected device or change the input source or volume of the device.
Choose display devices from the list of sets, and select the  Home tab. 
 Home
Select an item and change the corresponding setting.
Power
zOn: Power on a selected display.
zOff : Power off a selected display.
Input
zInput Source : Change the input source.
 †Input sources available can vary depending on the Display Device Models.
†The input source can be changed only for displays that are turned on. 
zChannel  : Change the channel.
 †The TV channel can be changed by using the up/down arrow keys.
†The channel can be changed only when the input source is TV .
†Only registered channels can be selected. 
 Volume
 The volume can be changed or the sound can be muted only for displays that are turned on. 
Volume
†The volume can be adjusted using the slider bar in the range of 0 to 100.
Adjust the volume of a selected display. 
Mute
†Enable or disable  Mute for a selected display. 
Mute  will automatically be disabled if  Volume is adjusted when  Mute is on.
1
2 
						

							83
Using MDC
3
3 Using MDC
 Alert
zFault Device
†This menu shows a list of display devices which have following errors - fan error, temperature 
error, brightness sensor error, or lamp error.
Select a display device from the list. The Repair button will be enabled. Click the refresh button 
to refresh the error status of the display device. The recovered display device will disappear 
from the  Fault Device List. 
zFault Device Alert
†Display device in which error is detected will be reported by email.
Fill in all required fields. The  Test and  OK buttons will be enabled. Ensure the  Sender 
information and at least one  Recipient are entered.
3 
						

							84
Using MDC
3
3 Using MDC
3.3.9 Screen Adjustment
The screen settings (contrast, brightness, etc.) can be adjusted. 
Choose display devices from the list of sets, and select the  Picture tab.
Custom
Select an item and change the corresponding screen setting.
 zColor and Tint are not available if the input source is  PC.
zRed , Green , Blue and PC Screen Adjustment  are not available if the input source is  Video.
zColor, Tint, Color Tone , Color Temp , Red, Green , Blue and PC Screen Adjustment  are not 
available if both  PC Source and Video Source  are selected.
 
Picture Mode
zAdjust the picture mode for the selected display device.
Contrast
zAdjust the contrast for the selected display device.
Brightness
zAdjust the brightness for th e selected display device.
Color
zAdjust the colors for the selected display device.
Tint (G/R)
zAdjust the tint for the selected display device.
Color Tone
zAdjust the background color tone for the selected display device.
Color Temp
zAdjust the color temperature for the selected display device.
 This option is enabled if  Color Tone is set to Off . 
Red
zCustomize the intensity of red color for the selected display device. 
						

							85
Using MDC
3
3 Using MDC
Green
zCustomize the intensity of green color for the selected display device.
Blue
zCustomize the intensity of blue co lor for the selected display device.
Options
Dynamic Contrast
Adjust the Dynamic Contrast for the selected display device. 
Gamma Control
Change the gamma value for the selected display. 
Auto Motion Plus
This option is used to view dynamic images.
zOff : Disable the  Auto Motion Plus  function.
zClear: Set the level of  Auto Motion Plus  to clear. This mode is suitable to display vivid images.
zStandard: Set the level of  Auto Motion Plus  to standard.
zSmooth: Set the level of  Auto Motion Plus  to smooth. This mode is  suitable to display smooth 
images.
zCustom : Customize the level of screen burn-in or flickering.
zDemo: This function demonstrates the technology of  Auto Motion Plus. The result when the mode 
is changed can be previewed on the left side of the window.
Brightness Sensor
Enable or disable the  Brightness Sensor for the selected display device.
The  Brightness Sensor  detects the ambient light intensity and automatically adjusts the screen 
brightness.
 Brightness Sensor  may not be available depending on the product.  
HDMI Black Level
Adjust the HDMI Black Level  for the selected display device. 
						

							86
Using MDC
3
3 Using MDC
Size
Picture Size
Adjust the screen size for the selected display device. 
The  Detail item will be disabled if  Picture Size is set to a mode that does not support detailed 
configuration.
The -/+ buttons can be used to adjust  Zoom.
The screen can be relocated using the up/down/left/right buttons.
Detail
You can view details of the selected screen size.
PC Screen Adjustment
Frequency adjustment or fine-tuning is available by using the -/+ buttons in  Coarse or Fine .
To relocate the screen, click one of the four images below  Position.
To automatically adjust the frequency, fine-tune or relocate the screen, click  Auto Adjustment. 
						

							87
Using MDC
3
3 Using MDC
3.3.10 Sound Adjustment
You can change the sound settings. 
Choose display devices from the list of sets, and select the  Sound tab.
 The Bass  or Treble  item will be disabled if the item  is not supported by the selected set. 
Bass
Adjust the bass for the selected display. 
Treble
Adjust the treble for the selected display. 
Balance(L/R)
Adjust the volume of the left and right speakers of the selected display device. 
SRS TS XT
Enable or disable the  SRS TS XT effect for the selected display device.  
						

							88
Using MDC
3
3 Using MDC
3.3.11 System Setup
Choose display devices from the list of sets, and select the  System tab. 
Video Wall
The Video Wall  function can be used to display part of a whole picture or repeat the same picture on 
each of connected multiple display devices.
 Video Wall  is enabled only when devices are in the group. 
Video Wall
Enable or disable  Video Wall.
Format
Select the format to display the split screen.
VMM






























/BUVSBM 
						

							89
Using MDC
3
3 Using MDC
H
Select the number of ho
rizontal display devices.
A maximum of 15 displays can be arranged in a row.
 A maximum of 6 can be assigned to V if 15 is assigned to H. 
V
Select the number of vertical display devices. 
A maximum of 15 displays can be arranged in a row.
 A maximum of 6 can be assigned to V if 15 is assigned to H. 
Screen Position
View the layout of displays (configured by the screen divider) or change the layout as required.
Screen Position  and Preview are enabled when  Video Wall is set to on. 
Note that if multiple sets are selected,  Preview is enabled only if the settings for H and V match the 
layout of the selected sets.
To change the  Position, select a set and drag it to a new position.
 The range of screen divider settings may differ depending on the model.  
						

							90
Using MDC
3
3 Using MDC
PIP
Basic information required to adjust PIP will appear in the menu screen.
 zPIP will be disabled when  Video Wall is ON.
zNote that Picture Size  is disabled when PIP is ON . 
PIP Size
View the PIP Size  of the current display. 
PIP Source
Select a PIP input source.
Sound Select
Select and enable the sound from either the primary screen or secondary screen.
Channel
The channel can be changed if  PIP Source is TV.