Samsung Series 7 User Guide

							51
Preparations
1
1 Preparations
PIP On/Off control
zFunction
The PIP mode of a TV/monitor can be turned on or off using a PC.
 †Only available on models that have the PIP function.
†The mode cannot be controlled if Video Wall is set to On .
†This function is not available in  MagicInfo. 
zViewing PIP on/off state (Get the PIP ON / OFF Status)
zSetting PIP on/off (Set the PIP ON / OFF)
"PIP": A code used to turn the PIP mode of a TV/monitor on or off
1: PIP ON
0: PIP OFF
zAck
"PIP": A code used to turn the PIP mode of a TV/monitor on or off
zNak
"ERR": A code showing what error has occurredHeader Command
IDData length
Checksum
0xAA 0x3C 0
Header Command IDData length Data
Checksum
0xAA 0x3C 1"PIP"
Header
Command
ID Data length Ack/Nak r-CMD Val1Checksum0xAA 0xFF
3‘A’ 0x3C "PIP"
Header
Command
ID Data length Ack/Nak r-CMD Val1Checksum
0xAA 0xFF
3‘N’ 0x3C "ERR" 
						

							52
Preparations
1
1 Preparations
Auto adjustment control (PC and BNC only)
zFunction 
Automatically adjust the PC system screen using a PC.
zViewing auto adjustment state (Get Auto Adjustment Status)
None 
zSetting auto adjustment (Set Auto Adjustment)
"Auto Adjustment" : 0x00 (at all times)
zAck
zNak
"ERR": A code showing what error has occurredHeader Command
IDData length Data
Checksum
0xAA 0x3D 1"Auto 
Adjustment"
Header
Command
ID Data length Ack/Nak r-CMD Val1Checksum0xAA 0xFF
3 ‘A’ 0x3D "Auto 
Adjustment"
Header
Command
ID Data length Ack/Nak r-CMD Val1Checksum0xAA 0xFF
3 ‘N’ 0x3D "ERR" 
						

							53
Preparations
1
1 Preparations
Video Wall Mode Control
zFunction
Video Wall mode can be activated on a TV/monitor using a PC.
This control is only available on a TV/monitor whose  Video Wall is enabled.
This function is not available in MagicInfo .
zViewing video wall mode (Get Video Wall Mode)
zSetting the video wall (Set Video Wall Mode)
"Video Wall Mode": A code used to activate Video Wall mode on a TV/monitor
1: Full
0: Natural
zAck
"Video Wall Mode": A code used to activate Video Wall mode on a TV/monitor
zNak
"ERR": A code showing what error has occurredHeader Command
IDData length
Checksum
0xAA 0x5C 0
Header Command IDData length Data
Checksum
0xAA 0x5C 1"Video Wall 
Mode"
Header
Command
ID Data length Ack/Nak r-CMD Val1Checksum
0xAA 0xFF
3 ‘A’ 0x5C"Video Wall 
Mode"
Header
CommandID Data length Ack/Nak r-CMD Val1Checksum
0xAA 0xFF
3‘N’ 0x5C "ERR" 
						

							54
Preparations
1
1 Preparations
Safety Lock
zFunction 
PC can be used to turn the Safety Lock function on or off on a TV/monitor.
This control is available regardless of whether or not the power is turned on.
zViewing the safety lock state (Get Safety Lock Status)
zEnabling or disabling safety lock (S et Safety Lock Enable / Disable)
"Safety Lock": Safety lock code to be set on a TV/monitor
1: ON
0: OFF
zAck
"Safety Lock": Safety lock code to be set on a TV/monitor
zNak
"ERR": A code showing what error has occurred Header Command
IDData length
Checksum
0xAA 0x5D 0
Header Command IDData length Data
Checksum
0xAA 0x5D
1"Safety 
Lock"
Header
Command
ID Data length Ack/Nak r-CMD Val1Checksum0xAA 0xFF
3‘A’ 0x5D "Safety 
Lock"
Header
Command
ID Data length Ack/Nak r-CMD Val1Checksum0xAA 0xFF
3 ‘N’ 0x5D "ERR" 
						

							552 Connecting and Using a Source Device
2 
Connecting and Using a Source Device
2.1 Before Connecting
Check the following before you connect this product with other devices.
Devices that can be connected to this product include PCs, camcorders, speakers, set top boxes and 
DVD/Blu-ray Disc players.
2.1.1 Pre-connection Checkpoints
zBefore connecting a source device, read the user manual provided with it. The number and locations 
of ports on source devices may differ from device to device.
zDo not connect the power cable until all connections are completed. Connecting the power cable 
during connection may damage the product.
zConnect the sound ports correctly: left = white and right = red.
zCheck the types of ports at the back of the product you want to connect. 
						

							56
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2 Connecting and Using a PC
2.2.1 Connecting to a PC
zDo not connect the power cable before connecting all other cables.
Ensure you connect a source device first before connecting the power cable.
zA PC can be connected to the product in a variety of ways.
Select a connection method suitable for your PC.
 Connecting parts may differ in different products.
 
Connection using the D-SUB cable (analog type)
Connection using a DVI cable (digital type)
RGB IN
RGB / DVI/ HDMI 
AUDIO IN
DVI IN
RGB / DVI / HDMI 
AUDIO IN 
						

							57
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
Connection Using an HDMI-DVI Cable
 When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC  to access 
video and audio content stored on the PC.
 
Connection Using an HDMI Cable
HDMI IN
RGB / DVI  / HDMI 
AUDIO IN
HDMI IN 
						

							58
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
Connection Using an DP Cable
DP IN 
						

							59
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.2.2 Changing the Resolution
 Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality.
The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected.
 
Changing the Resolution on Windows XP
Go to Control Panel   Display  Settings , and change the resolution.
Changing the Resolution on Windows Vista
Go to Control Panel   Personal Settings   Display Settings , and change the resolution.
12 3
********
**********
12
34
***********
*********** 
						

							60
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
Changing the Resolution on Windows 7
Go to 
Control Panel   Display  Screen Resolution , and change the resolution.
12
34