Samsung Series 7 User Guide

							91
Using MDC
3
3 Using MDC
General
User Auto Color
Automatically adjust the screen colors.
 Available only in PC mode. 
Auto Power
Set the product to automatically power on.
Standby Control
Set the standby mode to activate if an input source is not detected.
Fan & Temperature
Configure the settings required to detect the fan speed and internal temperature for the product's 
protection.
Fan Control
Select a method to configure the fan speed.
Fan Speed
Configure the fan speed.
Temperature
Detect the internal temperature by specifying the range of temperature. 
						

							92
Using MDC
3
3 Using MDC
Security
Safety Lock
Lock the on-screen menus.
 To unlock the menus, set Safety Lock to Off. 
Button Lock
Lock the buttons on the display device.
 To unlock the buttons, set  Button Lock to Off. 
OSD Display
Source OSD
Select whether to display a message when the  Source is changed. 
Not Optimum Mode OSD
Select whether to display a message when a non-compatible mode is selected. 
No Signal OSD
Select whether to display a message when there is no input signal.
MDC OSD
Select whether to display a message when settings are changed by the MDC. 
						

							93
Using MDC
3
3 Using MDC
Time
Clock Set
Change the current time on the selected display device according to the time set on a PC. 
If the time is not set on the display device, null values will be displayed.
Timer
zOn Time : Set the time to power on the selected display device.
zOff Time : Set the time to power off the selected display device.
zVolume: Specify the volume of the display device when it is powered on by  On Time.
zSource: Specify the input source of the display device when it is powered on by On Time .
zHoliday: The Holiday Management settings can be applied to the  Timer.
zRepeat : Specify the period for which you want to repeat the selected  Timer. 
						

							94
Using MDC
3
3 Using MDC
†Once: Activate the timer only one time.
†EveryDay: Activate the timer every day.
†Mon~Fri : Activate the timer from Monday through Friday.
†Mon~Sat : Activate the timer from Monday through Saturday.
†Sat~Sun: Activate the timer on Saturdays and Sundays.
†Manual: Customize days of the week.
 The checkboxes to select days of the week below  Repeat are enabled only if Manual  is selected. 
Holiday Management
Holiday Management allows you to prevent devices that are set to be powered on by the  Timer from 
turning on at a specified date.
 The Holiday Management  function can be enabled or disabled in the  Timer settings menu.
 
zAdd: You can specify holidays:
Click the  Add button in the  Holiday Management window.
zDelete: Delete holidays. check the corresponding checkboxes and click this button.
zList of holidays: View a list of holidays you have added.  
						

							95
Using MDC
3
3 Using MDC
Screen Burn Protection
Pixel Shift
Move the screen slightly at specified time intervals to prevent screen burn-in.
Screen Saver
This function prevents screen burn-in when the screen of the selected display device is left idle for an 
extended period of time. 
zInterval: Set the interval to activate the Screen Saver .
zMode: The Time setting can vary for each  Mode. 
						

							96
Using MDC
3
3 Using MDC
Safety Screen
The 
Safety Screen  function can be used to prevent screen burn-in when a stationary image displays on 
the screen of a display device for an extended period of time. 
Lamp Control
Lamp Control  is used to adjust the backlight to reduce power consumption.
Automatically adjust the backlight of the selected display device at a specified time. 
If Manual Lamp Control  is adjusted, Auto Lamp Control  will automatically switch to  Off. 
Manually adjust the backlight for the selected display. 
If  Auto Lamp Control is adjusted,  Manual Lamp Control will automatically switch to  Off. 
zAmbient Light : Ambient Light  detects ambient light intensity and automatically adjusts the screen 
brightness of all the LFDs in the same serial chain. 
						

							97
Using MDC
3
3 Using MDC
3.3.12 Tool Settings
 Security
Panel Control
Turn on or off the screen of a display device.
Remote Control
Enable or disable the remote control.
 Reset
Reset Picture
Reset the screen settings.
Reset Sound
Reset the sound settings.
Reset System
Reset the system settings.
Reset All
Reset the screen, soun d and system settings at the same time.
1234
1
2 
						

							98
Using MDC
3
3 Using MDC
 Edit Column
Select the items you want to display in the list of sets.
 Information
View the program information.
3
4 
						

							99
Using MDC
3
3 Using MDC
3.3.13 Other Functions
Resizing a Window
Place the mouse pointer on a corner of the program window. An arrow will appear. Move the arrow to 
customize the size of the program window. 
						

							100
Using MDC
3
3 Using MDC
Group Management
Creating Groups
Create groups and manage the list of sets on a group basis. 
 Duplicate group names cannot be used. 
1Right-click and select Group  Edit in the display device list section  on the left side of the program 
window.
2In the Edit Group  window displayed, click  Add on the same level or Add on the sub level .
zAdd on the same level : Create a group on the same level as the selected group.
 The Add on the same level button is enabled only if at least one group is created.