Samsung Series 7 User Guide

							111
Screen Adjustment
4
4 Screen Adjustment
4.4 Auto Adjustment
 MENU []   Picture  Auto Adjustment   ENTER [ ]
Adjust frequency values/positions and fine tune the settings automatically.
 This option is available when the input source is  PC. 
4.5 Using the 3D function (ME75B model only)
 MENU  []   Picture  3D   ENTER []
4.5.1 3D Mode
This exciting new feature enables you to view 3D content. In order to fully enjoy this feature, you must 
purchase a pair of Samsung 3D Active Glasses to view 3D video.
4.5.2 Viewing product  Using the 3D function
IMPORTANT HEALTH AND SAFETY INFORMATION FOR 3D PICTURES. Read and 
understand the following safety inform ation before using the 3D function.
 Warning
†Some viewers may experience discomfort while viewing 3D product such as dizziness, nausea 
and headaches. If you experience any such symptom, stop viewing 3D product, remove 3D 
Active Glasses and rest.
†Watching 3D images for an extended period of time may cause eye strain. If you feel eye strain, 
stop viewing 3D product, remove your 3D Active Glasses and rest.
†A responsible adult should frequently check on children who are using the 3D function. If there 
are any reports of tired eyes, headaches, dizziness, or nausea, have the child stop viewing 3D 
product and rest.
†Do not use the 3D Active Glasses for other purposes (such as general eyeglasses, sunglasses, 
protective goggles, etc.)
†Do not use the 3D function or 3D Active Glasse s while walking or moving around. Using the 3D 
function or 3D Active Glasses while moving around may result in injuries due to running into 
objects, tripping, and/or falling.
z3D Mode : Select the 3D input format.
m
m 
						

							112
Screen Adjustment
4
4 Screen Adjustment
 †If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and then select 
3D Mode from the list below that provides the best 3d viewing experience.
†When watching 3D images, turn on 3D Active Glasses. 
 †Some file format may not supported the “2D   3D.”
†“Side by Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 
1080p in HDMI and USB mode or when set to  PC and the PC is connected through an HDMI 
/ DVI cable.
†“Vertical Stripe”, “Line by Line” and “Checker Bo ard” are available when the resolution is set 
to PC and the PC is connected through an HDMI / DVI cable.
†“Frame Sequential” displays the frequency (60Hz only) when the resolution is set to PC. 
z3D Effect : Adjust 3D effects like perspective and depth for your preferred 3D viewing experience.
†Auto: Automatically adjust the perspective and depth settings in accordance with the 3D input 
source.
†Manual : Manually adjust the perspective and depth settings.
- 3D Perspective  (-5 ~ +5 ): Adjust overall 3D perspective of on-screen image.
- Depth  (1 ~ 10 ): Adjust overall depth.
zL/R Change  (L/R Image  / R/L Image): Swap the left and right pictures.
z3D    2D (Off  / On ): Displays the image for the left eye only.
 This function is deactivated when 3D Mode  set to “2D   3D” or Off. 
z3D Auto View (Off  / Message Notice  / On): If 3D Auto View  is set to On, a “Side by Side” format 
HDMI signal with one of the resolutions below is automatically switched to 3D. 
If you set  3D Auto View  to Message Notice , a pop up message window appears when the product 
receives a 3D signal.
3D ModeOperation
Off Turns the 3D function off.
2D  3D
Changes a 2D image to 3D.
Side by Side Displays two images next to each other.
Top & Bottom Displays one image above another.
Line by LineDisplays the images for the left and right eye alternately in 
rows.
Vertical Stripe
Displays the images for the left and right eye alternately in 
columns.
Checker BoardDisplays the images for the left and right eye alternately in 
pixels.
Frame 
SequentialDisplays the images for the left and right eye alternately in 
frames.
3D 3D 
						

							113
Screen Adjustment
4
4 Screen Adjustment
 If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 
3D Mode  using the corresponding menu.
 
z3D Optimize : The overall adjustment of 3D effect.
 Support resolution (16:9 only)
 
Resolution supported for HDMI PC mode
The resolution for HDMI PC mode is optimized to 1920 x 1080 input.
An input resolution other than 1920 x 1080 may not  be displayed properly in 3D display or full screen 
mode.
How to watch the 3D image
zMethod 1
 †Some 3D modes may not be available depe nding on the format of the image source.
†To watch in 3D, wear 3D Active Glasses and press the power button on the glasses. 
1Press the MENU button on your remote, use the   or   button to select  Picture, and then 
press the [ ] button.
2Use the   or   button to select  3D, and then press the [ ] button.
3Use the   or   button to select  3D Mode, and then press the [ ] button.
4Using the   or   buttons on your remote control, select the  3D Mode of the image you want 
to view.
ResolutionFrequency (Hz)
1280 x 720p 25 / 50 Hz
1920 x 1080i 25 / 50 Hz
1920 x 1080p 25 / 50 Hz 
						

							114
Screen Adjustment
4
4 Screen Adjustment
Supported formats and operating specifications for Standard HDMI 3D
 The 3D formats indicated below are recommended by the HDMI association and must be supported.
 
For the Standard HDMI 3D format with 24Hz, the product is optimized as follows.
zJudder Reduction
 Display Mode: When  Auto Motion Plus is set to Smooth or Custom , you can 
watch a smooth picture without judder.
Before using 3D function
 z3D Mode  is set to its memorized configuration value automatically when you changing the input 
source.
zSome  Picture  functions are disabled in 3D  mode.
zPIP is not supported in  3D mode.
z3D Active Glasses from Samsung’s previous prod uct (IR type) or other manufacturers not be 
supported.
zWhen the product is initially powered on, may take some time until the 3D display is optimized.
zThe 3D Active Glasses may not work properly if there is any other 3D product or electronic devices 
turned on near the glasses or product. If there is  a problem, keep other electronic devices as far 
away as possible from the 3D Active Glasses.
zSome files are not supported in the 2D to 3D function.
zBe sure to stay within the viewing angle and optimum product viewing distance when watching 3D 
pictures. Otherwise, you may not be able to enjoy proper 3D effects.
zThe ideal viewing distance should be three times or more the height of the screen. We recommend 
sitting with viewer’s eyes on a level with the screen.
 
Source signal formatStandard HDMI 1.4 3D
1920 x 1080p @ 24 Hz x 2 1920 x 2205p @ 24 Hz
1280 x 720p @ 50 / 60 Hz x 2 1280 x 1470p @ 50 / 60 Hz 
						

							115
Screen Adjustment
4
4 Screen Adjustment
4.6 Advanced Settings
 MENU []   Picture  Advanced Settings   ENTER [ ]
All Advanced Settings  are available in the Standard and Movie  modes. To use, select an option using 
the up and down arrow keys, and then press [ ]. Use the arrow keys to change the value or setting, 
and then press [ ].
 In PC  mode, you can only make changes to  Gamma and White Balance . 
4.6.1 Black Tone
Select the black level to adjust the screen depth.
zOff / Dark  / Darker  / Darkest
4.6.2 Dynamic Contrast
Adjust the screen contrast.
zOff  / Low  / Medium  / High
4.6.3 Shadow Detail
Increase the brightness of dark images.
The displayed image may differ depending on the model.
m
Advanced Settings
Black Tone
Dynamic Contrast
Shadow Detail
Gamma
Expert Pattern
RGB Only Mode
Color Space Off
High 0
0
Off
Off
Native 
						

							116
Screen Adjustment
4
4 Screen Adjustment
4.6.4 Gamma
Adjust the primary color intensity.
4.6.5 Expert Pattern
Use the Expert Pattern  function to calibrate the picture. If the OSD menu disappears or a menu other 
than the Picture menu is opened, the product saves the calibration and the  Expert Pattern screen 
disappears.
zOff
Turns the  Expert Pattern  function off.
zPattern1
This test screen demonstrates the effect of the display settings on shades of grey and black.
zPattern2
This test screen demonstrates the effect of the display settings on colors.
 zAfter selecting Pattern1 or Pattern2 , you can adjust any of the advanced settings  for desired 
effect.
zWhile the Expert Pattern  is running, sound is not outputted.
zOnly enabled on DTV, Component , HDMI modes. 
4.6.6 RGB Only Mode
Displays the Red, Green  and Blue  color for making fine adjustments to the hue and saturation.
zOff / Red  / Green  / Blue
4.6.7 Color Space
Adjusts the range and variety of colors (the color space) available to create images.
zAuto  / Native  / Custom
 To adjust  Color, Red, Green , Blue and Reset , set Color Space  to Custom. 
4.6.8 White Balance
Adjust the color temperature for a more natural picture.
zR-Offset / G-Offset  / B-Offset: Adjust each color’s (red, green, blue) darkness.
zR-Gain / G-Gain  / B-Gain : Adjust each color’s (red, green, blue) brightness.
zReset: Resets the  White Balance  to it’s default settings. 
						

							117
Screen Adjustment
4
4 Screen Adjustment
4.6.9 10p White Balance (Off / On)
Controls the white balance in 10 point interval by adjusting the red, green, and blue brightness.
zInterval: Select interval to adjust.
zRed: Adjust the red level.
zGreen : Adjust the green level.
zBlue: Adjust the blue level.
zReset: Resets the  10p White Balance  to its default settings.
 zAvailable when the Picture Mode is set to Movie  and when the external input is set to all input.
zSome external devices may not support this function. 
4.6.10 Flesh Tone
Emphasize pink Flesh Tone.
4.6.11 Edge Enhancement (Off / On)
Emphasize object boundaries.
4.6.12 Motion Lighting (Off / On)
Reduces power consumption by reducing screen brightness when the picture on the screen is in motion.
4.6.13 LED Motion Plus (Off / On)
Removes blur and judder from scenes with large amounts of rapid movement to provide a clearer 
picture. 
						

							118
Screen Adjustment
4
4 Screen Adjustment
4.7 Picture Options
 MENU []   Picture  Picture Options   ENTER [ ]
Select an option using the   and   arrow keys, and the press [ ]. Use the arrow keys to change the 
setting, and then press [ ].
 In PC  mode, you can only make changes to the  Color Tone. 
4.7.1 Color Tone
zOff / Cool  / Standard /  Warm1 / Warm2
 zWarm1  or Warm2  will be deactivated when the Picture Mode  is Movie .
zSettings can be adjusted and stored for each external device connected to an input on the 
product.
 
4.7.2 Color Temp.
Adjust the color temperature ( Red/Green /Blue ). (Range: 3000K–15000K)
 This option is available when mode is set to  Color Tone are set to Off. 
The displayed image may differ depending on the model.
m
p
Color Tone
Color Temp.
Digital Noise Filter
MPEG Noise Filter
HDMI Black Level
Flim Mode
Auto Motion Plus Off
10000K Auto
AutoLow Off
Standard 
						

							119
Screen Adjustment
4
4 Screen Adjustment
4.7.3 Digital Noise Filter
If the broadcast signal received by your product is weak, you can activate the Digital Noise Filter feature 
to reduce any static and ghosting that may appear on the screen.
zOff  / Low  / Medium  / High  / Auto  / Auto Visualization
zAuto Visualization : When changing analog channels, displays signal strength.
†Only available for analog channels.
†When bar is green, is that the best possible signal.
 When the signal is weak, try all the options until the the product displays the best picture. 
4.7.4 MPEG Noise Filter
Reduces MPEG noise to provid e improved picture quality.
zOff / Low  / Medium  / High  / Auto
4.7.5 HDMI Black Level
Selects the black level on the screen to adjust the screen depth.
zNormal  / Low
 Available only in  HDMI mode. 
4.7.6 Film Mode
Sets the product to automatically sense and process film signals from all sources and adjust the picture 
for optimum quality.
zOff / Auto1  / Auto2
 Available in  TV, AV , COMPONENT  (480i / 1080i) and  HDMI (480i / 1080i).  
						

							120
Screen Adjustment
4
4 Screen Adjustment
4.7.7 Auto Motion Plus
Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer 
picture.
 The menu names may vary depending on the country. 
This feature can be used to view fast moving scenes.
zOff : Switches Auto Motion Plus  off.
zClear : Sets  Auto Motion Plus  to Clear  (suitable for viewing moving images clearly) mode.
zStandard  : Sets Auto Motion Plus  to Standard  mode.
zSmooth : Sets Auto Motion Plus  to Smooth  (suitable for viewing moving images naturally) mode.
zCustom  : Use to reduce the afterimage and judder as much as you want.
zDemo : Demonstrates  Auto Motion Plus  (the picture will be displayed  on the left half of the screen 
when  Auto Motion Plus  is set to On).
zBlur Reduction  : Use to reduce the afterimage as much as you want.
 This is only supported if the  Auto Motion Plus is set to Custom. 
zJudder Reduction  : Use to reduce the judder as much as you want.
 This is only supported if the  Auto Motion Plus is set to Custom. 
zReset : Restore Auto Motion Plus  settings to default values.
 †The color on screen may vary with this option unintentionally.
†Disabled when  PIP is set to On . 
4.8 Reset Picture 
 MENU []   Picture  Reset Picture   ENTER [ ]
Resets your current picture mode to its default settings.
m