Samsung Series 7 User Guide

							201
MagicInfo Lite
10
10 MagicInfo Lite
zUSB AutoPlay will automatically run if US B memory is connected when Network Schedule  or 
Local Schedule  is running.
10.8 When Content is Running
10.8.1 Viewing the details of the content that is running
 Press the INFO button on the remote control. 
1Software Version : Displays the software version of a device
2Device Name: Displays the name of a device recognized by the server
3Device ID: Displays the original identification number of a device
4Mode: Displays the current operating mode ( Network Schedule, Local Schedule , Internal
AutoPlay  or USB AutoPlay ) of MagicInfo Lite Player
5Server : Displays the connection status ( Connected, Disconnected  or Non-approval ) of the server
6USB: Displays the connection status of a USB device
Network Schedule
Local Schedule
h Local Schedule Manager
Contents Manager
Internal AutoPlay
USB AutoPlay Close
Mode
Network Schedule Server
Connected USB
Disconnected 
						

							202
MagicInfo Lite
10
10 MagicInfo Lite
7Schedule Download: Displays the progress of a network schedule being downloaded from the 
server
10.8.2 Changing the settings fo r the content that is running
 Press the TOOLS button on the remote control. 
You can change the  Picture Mode or Sound Mode setting or safely remove a USB device ( Safely 
Remove USB ) while content is playing by pressing the  TOOLS button on the remote control.
zPicture Mode : Customizes the screen settings for the content currently playing ( Dynamic, 
Standard , Natural , Movie )
zSound Mode : Customizes the audio settings for the content currently playing ( Standard, Music , 
Movie , Clear Voice , Amplify )
zSafely Remove USB
Information
Software Version
Device Name
Device ID
Mode
Server
USB
Schedule Download : A-VNUSCDSP-100
: Monitor
: FE-FF-FF-FF-FF
: Network Schedule
: Connected
: Connected
: No Schedule to download
Close
Tools 
						

							20311 Troubleshooting Guide
11 
Troubleshooting Guide
11.1 Requirements Before Contacting Samsung Customer 
Service Center
11.1.1 Testing the Product
 Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, 
contact Samsung Customer Service Center.
 
Check if your product is operating normally by using the product test function.
If the screen remains blank while the power LED blinks even when the product is correctly connected to 
a PC, perform product testing.
1Power off both the PC and product.
2Disconnect all the cables from the product.
3Power on the product.
4If " No Signal " is displayed, the product is operating normally.
 If the screen remains blank, check the PC system, video controller and cable. 
11.1.2 Checking the Reso lution and Frequency
"Not Optimum Mode " will briefly be displayed if a mode that exceeds a supported resolution is selected 
(refer to Supported Resolutions).  
						

							204
Troubleshooting Guide
11
11 Troubleshooting Guide
11.1.3 Check the followings.
Installation issue (PC mode)
The screen keeps switching on and off.  Check the cable connection between the  product and PC, and ensure the connection is 
secure. 
("2.2 Connecting and Using a PC")
Blank spaces are found at the top and bottom 
of the screen when an HDMI or HDMI-DVI 
cable is connected to the product and PC. Blank spaces on the screen are not caused by 
the product.
The cause of the problem is the PC or graphics 
card, and can be fixed by adjusting the screen 
size in the HDMI or DVI option of the graphics 
card settings menu.
If the graphics card settings menu has no 
option to adjust the screen size, update the 
graphics card driver to the latest version.
(Please contact the graphics card or computer 
manufacturer for details on how to adjust the 
screen settings.)
Screen issue
The power LED is off.  The screen will not 
switch on. Make sure that the power cord is connected. 
("2.2 Connecting and Using a PC")
" No Signal " is displayed  on the screen 
(refer to "Connecting to a PC"). Check that the product is connected correctly 
with a cable 
("2.2 Connecting and Using a PC")
Check that the device connected to the 
product is powered on.
" Not Optimum Mode " is displayed. This message is displayed when a signal from 
the graphics card exceeds the product's 
maximum resolution and frequency.
Refer to the Standard Signal Mode Table and 
set the maximum resolution and frequency 
according to the product specifications.
The images on the screen look distorted. Check the cable connection to the product  ("2.2 Connecting and Using a PC") 
						

							205
Troubleshooting Guide
11
11 Troubleshooting Guide
The screen is not clear. The screen is blurry. Adjust 
Coarse and Fine .
Remove any accessories (video extension 
cable, etc) and try again.
Set the resolution and frequency to the 
recommended level.
The screen appears unstable and shaky. Check that the resolution and frequency of the  PC and graphics card are set within a range 
compatible with the product. Then, change the 
screen settings if required by referring to the 
Additional Information on the product menu 
and the Standard Signal Mode Table. 
There are shadows or ghost images left on the 
screen.
The screen is too bright. The screen is too 
dark.
Adjust 
Brightness  and Contrast .
Screen color is inconsistent. Go to Picture  and adjust the  Color Space 
settings.
White does not really look white. Go to Picture  and adjust the  White Balance 
settings.
There is no image on the screen and the power 
LED blinks every 0.5 to 1 second. The product is in power-saving mode.
Press any key on the ke
yboard or move the 
mouse to return to the previous screen.
Sound issue
There is no sound.  Check the connection of the audio cable or 
adjust the volume 
("2.2 Connecting and Using a PC")
Check the volume.
The volume is too low.   Adjust the volume.
If the volume is still low after turning it up to the 
maximum level, adjust the volume on your PC 
sound card or software program.
Screen issue 
						

							206
Troubleshooting Guide
11
11 Troubleshooting Guide
Remote control issue
The remote control does not work.  Make sure that the batteries are correctly in 
place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs 
switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is 
booting.  If a beeping sound is heard when your PC is 
booting, have yo
ur PC serviced.  
						

							207
Troubleshooting Guide
11
11 Troubleshooting Guide
11.2 Q & A
QuestionAnswer
How can I change the 
frequency? Set the frequency on your graphics card.
z"Windows XP": Go to 
Control Panel  Appearance and 
Themes   Display   Settings   Advanced  
Monitor  and adjust the frequency in  Monitor Settings.
z"Windows ME/2000": Go to  Control Panel  Display   
Settings   Advanced   Monitor  and adjust the 
frequency in Monitor Settings .
z"Windows Vista": Go to Control Panel  Appearance and 
Personalization   Personalize   Display Settings   
Advanced Settings   Monitor  and adjust the frequency in 
Monitor Settings.
z"Windows 7": Go to  Control Panel  Appearance and 
Personalization   Display   Adjust resolution   
Advanced Settings   Monitor  and adjust the frequency in 
Monitor Settings. 
						

							208
Troubleshooting Guide
11
11 Troubleshooting Guide
 Refer to the user manual for your PC or graphics card for further instructions on adjustment.. 
How can I change the 
resolution?z"Windows XP": Go to Control Panel  Appearance and 
Themes   Display   Settings  and adjust the resolution.
z"Windows ME/2000": Go to  Control Panel  Display   
Settings  and adjust the resolution.
z"Windows Vista": Go to  Control Panel  Appearance and 
Personalization   Personalize   Display Settings  and 
adjust the resolution.
z"Windows 7": Go to  Control Panel  Appearance and 
Personalization   Display   Adjust Resolution  and 
adjust the resolution.
How do I set power-saving 
mode?
zWindows XP: Set power-saving mode in  Control Panel  
Appearance and Themes   Display   Screen Saver 
Settings  or BIOS SETUP on the PC. 
zWindows ME/2000: Set power-saving mode in  Control 
Panel   Display   Screen Saver Settings  or BIOS 
SETUP on the PC.
zWindows Vista: Set po wer-saving mode in Control Panel  
Appearance and  Personalization  Personalize   
Screen Saver Settings  or BIOS SETUP on the PC.
zWindows 7: Set power-saving mode in  Control Panel  
Appearance and  Personalization  Personalize   
Screen Saver Settings  or BIOS SETUP on the PC.
QuestionAnswer 
						

							20912 Specifications
12 
Specifications
12.1 General
 Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems. 
Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor 
installation takes place automatically. However, you can customize the installation settings if desired.
  Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may 
appear brighter or darker on the panel. This does not affect product performance.
 
Model NameME65BME75B
Panel  Size
163 cm 190.5 cm
Display 
area
1428.48 mm (H) x 803.52 mm (V) 1653.2 mm (H) x 931.3 mm (H)
Dimensions (W x H x D) / 
Weight
1480.5 x 855.5 x 32.2 mm / 25.1 kg1678.2 x 958.7 x 49.9 mm / 44.1 kg
Audio Output 10 W + 10 W15 W + 15 W
VESA 400
 x 400 mm
Display Color 1.07B
Synchronization
Horizontal30 ~ 81 kHz
Vertical  56 ~ 75 Hz
Resolution Optimum 
resolution
1920 x 1080 @ 60 Hz
Maximum 
resolution 1920 x 1080 @ 60 Hz
Maximum Pixel Clock 148.5 MHz (Analog, Digital)
Power Supply This product uses 100 to 240V. Refer to the label at the back of the 
product as the standard voltage can vary in different countries.
Signal connectors Input : ANT IN(ATV/DTV), AV
 IN/COMPONENT IN(common), 
RGB IN(PC D-Sub), DVI IN, HDMI IN, DP IN, RGB/DVI/HDMI AUDIO IN, 
RJ45, RS232C IN, IR/AMBINET SENSOR IN
Output : DVI OUT(LOOPOUT), AUDIO OUT, RS232C OUT, IR OUT
USB 1DOWN
Environmental 
considerations
OperatingTemperature : 32˚F ~ 104˚F (0˚C ~ 40˚C)
Humidity : 10 % ~ 80 %, non-condensing
Storage Temperature : -4˚F ~ 113˚F (-20˚C ~ 45˚C)
Humidity : 5 % ~ 95 %, non-condensing 
						

							210
Specifications
12
12 Specifications
 This device is a Class A digital apparatus. 
12.2 PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and 
changing the color of the power LED if the product is not used for a specified period of time. The power 
is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or 
move the mouse. Power-savign mode only functions when the product is connected to a PC with a 
power-saving function.
 zThe displayed power consumption level can vary in different operating conditions or when settings 
are changed.
zSOG (Sync On Green) is not supported.
zTo reduce the power consumption to 0, turn off disconnect the power cord. Disconnect the power 
cable if you will not be using the product for an extended period of time (during vacation, etc.).
zTest condition of typical power consumption : Energy star program requirement for Television 
Version 5.3
 
State
Normal Operation
Power 
saving modePower off 
(Power 
Button)
Rating
Typical
Without PIMWith PIM
Power Indicator  OffBlinkingOff
Power 
Consumption ME65B 190 W 260 W 107 W
Less than 1 W Less than 1 W
ME75B 290 W 340 W 120 W