Home > Samsung > Printer > Samsung SCX 4824FN User Manual

Samsung SCX 4824FN User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung SCX 4824FN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Installing accessories_81
    installing accessories
    Your machine is a full-featured  model that has been optimized to  meet most of your printing needs. Reco gnizing that each user 
    may have different require ments, however, Samsung makes several accessories  available to enhance your machine’s capabilities.
    This chapter includes:
    • Precautions to take when installing accessories • Upgrading a memory module
    PRECAUTIONS TO TAKE  WHEN INSTALLING 
    ACCESSORIES
    • Disconnect the power cord
    Never remove the control board cover while the power is turned on.
    To avoid the possibility of an electrical shock, always disconnect the 
    power cord when installing or removing ANY internal or external 
    accessories.
    • Discharge static electricity The control board and internal accessories (memory module) are 
    sensitive to static electricity. Before installing or removing any internal 
    accessories, discharge static electricity from your body by touching 
    something metal, such as the metal back plate on any device plugged 
    into a grounded power source. If yo u walk around before finishing the 
    installation, repeat this procedure to  discharge any static electricity 
    again.
    UPGRADING A MEMORY MODULE
    Your machine has a small outline dual in-line memory module (SODIMM). 
    Use this memory module slot to install additional memory.
    When you are expanding the memory capacity, you can add a memory 
    module to the vacant memory slot. Your machine has 128 MB memory, and 
    you can add a 256 MB memory module. 
    Order information is provided for optional memory module. (see Memory 
    module on page 80.)
    Installing a memory module
    1. Turn the machine off and unplug all cables from the machine.
    2. Open the control board cover. 
    3. Take out a new memory module from the plastic bag. 4.
    Holding the memory module by the edges, align the memory module on 
    the slot at about a 30-degree tilt. Make sure that the notches of the 
    module and the grooves on the slot fit each other.
    5. Press the memory module into the slot with care until you hear a click. 
    6. Replace the control board cover.
    7. Reconnect the power cord and printer cable, and turn the machine on.
    When installing accessories, battery inside the machine is a service 
    component. Do not change it by yourself.
    Risk of explosion if battery is replaced by an incorrect type. Dispose 
    used batteries according to the instructions.
    The notches and grooves illustrated above may not match those 
    on an actual memory module and its slot.
    Do not press the memory module strongly or the module may be 
    damaged. If the module does not seem to fit into the slot properly, 
    carefully try the previous procedure again.
    To release the memory module, pull the two tabs on the sides of 
    the slot outwards, then the module springs out. 
    Downloaded From ManualsPrinter.com Manuals 
    						
    							82 _Installing accessories
    Activating the added memory in the PS printer 
    properties
    After installing the memory module, you need to select it in the printer 
    properties of the PostScript printer driver in order to use it.
    1.Make sure that the PostScript prin ter driver is installed on your 
    computer. For details about inst alling the PS printer driver, see Software 
    secion .
    2. Click the Windows Start  menu.
    3. For Windows 2000, select  Settings and then  Printers.
    For Windows XP/2003, select Printers and Faxes .
    For Windows Vista/2008, select  Control Panel > Hardware and Sound  
    >  Printers .
    For Windows 7, select  Control Panel > Hardware and Sound  > 
    Devices and Printers .
    For Windows Server 2008 R2, select  Control Panel > Hardware > 
    Devices and Printers .
    4. Select the  Samsung SCX-4x28 Series PS  printer.
    5. Click the right mouse button on the printer icon and select  Properties.
    6. Select  Device Settings .
    7. Select the amount of memory you installed from 
    Printer Memory in the Installable Options section.
    8. Click  OK.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Specifications_83
    specifications
    This chapter guides you about  this machine’s specifications such as various features.
    This chapter include:
    • General specifications
    • Printer specifications
    • Scanner specifications • Copier specifications
    • Facsimile specifications
    GENERAL SPECIFICATIONS
    The symbol * optional feature depending on machines.
    ITEMDESCRIPTION
    ADF Capacity
    • SCX-4x24 Series: Up to 30 sheets 75 g/m2 (20 lb 
    bond) 
    • SCX-4x28 Series: Up to 50 sheets 75 g/m
    2 (20 lb 
    bond) 
    ADF document 
    size Width: 142 to 216 mm (5.6 x 8.5 inches)
    Length: 148 to 356 mm  (5.8 x 14 inches)
    Paper input 
    capacity
    • Tray: 250 sheets for plain paper, 80 g/m2 (20 lb 
    bond)
    • Manual tray: 1 sheet for paper
    • Optional tray: 250 sheets for plain paper, 80 g/m
    2 
    (20 lb bond)
    For details about paper input capacity, see 32 page.
    Paper output 
    capacity SCX-4x24 
    Series
    Face down: 100 sheets 75 g/m2 (20 lb 
    bond)
    SCX-4x28 
    Series Face down: 150 sheets 75 g/m
    2 (20 lb 
    bond)
    Power rating AC 110 - 127 V or AC 220 - 240 V
    See the Rating label on the machine for the correct 
    voltage, frequency (hertz) and type of current for your 
    machine.
    Power 
    consumption• Average operating mode: Less than 450 WH
    • Ready mode: Less than 60 WH
    • Power save mode: Less than 12 WH
    • Power off mode: 0 WH
    Noise LevelaSCX-4x24 
    Series• Ready mode: Less than 26 dBA
    • Printing mode: Less than 49 dBA
    • Copying mode: Less than 53 dBA
    SCX-4x28 
    Series• Ready mode: Less than 26 dBA
    • Printing mode: Less than 50 dBA
    • Copying mode: Less than 53 dBA
    Boot-up time
    Less than 15 seconds (from sleep mode)
    Operating 
    environment• Temperature: 10 to 32 °C (50 to 89.6 °F)
    • Humidity: 20 to 80% RH
    Display
    16 characters x 2 lines
    Toner 
    cartridge lifebAverage cartridge yield 5,000 standard pages.
    (Shipped with 2,000 pages Starter toner cartridge.)c
    Memory 
    (Expandable)*128 MB (max. 384 MB) 
    External 
    dimension
    (W x D x H)445.2 x 410.5 x 395.3 mm 
    (17.53 x 16.16 x 15.56 inches) without optional tray
    Weight
    (Including 
    consumables)14.5 Kg (32 lbs) 
    Package 
    weight
    • Paper: 2.8 Kg (6.2 lbs)
    • Plastic: 0.76 Kg (1.7 lbs)
    Fusing 
    temperature 180 °C (356 °F)
    a. Sound Pressure Level, ISO 7779
    b. Declared yield value in accordance with ISO/IEC 19752. The number  of pages may be affected by operat ing environment, printing interval, 
    media type, and media size.
    c. It varies depending on the product configuration.
    ITEMDESCRIPTION
    Downloaded From ManualsPrinter.com Manuals 
    						
    							84 _Specifications
    PRINTER SPECIFICATIONSSCANNER SPECIFICATIONS
    ITEMDESCRIPTION
    Printing method Laser beam printing
    Printing speeda
    a. It will be affected by  operating system used,  computing performance, 
    application software, connecting method, media type, media size and 
    job complexity. • SCX-4x24 Series: Up to 24 ppm (A4), 25 ppm 
    (Letter)
    • SCX-4x28 Series: Up to 28 ppm(A4), 30 ppm  (Letter)
    Duplex printing 
    speed SCX-4x28 Series: Up to 14 ipm (A4/Letter)
    First print out 
    time
    From 
    ready
    • SCX-4x24 Series: Less than 9.5 
    seconds
    • SCX-4x28 Series: Less than 8.5  seconds
    From 
    coldboot • SCX-4x24 Series: Less than 17 
    seconds
    • SCX-4x28 Series: Less than 16  seconds
    Print resolution Up to 1,200 dpi effective output
    Printer language• SCX-4x24 Series: PCL6
    • SCX-4x28 Series: PCL6, PostScript 3
    OS compatibilityb
    b. Visit www.samsungprinter.com to download the latest software version.
    • Windows: 2000/XP/2003/2008/Vista/7/Server 
    2008 R2
    • Linux: Various Linux OS
    • Macintosh: Mac OS X 10.3~10.6
    Interface • High speed USB 2.0
    • Ethernet 10/100 Base TX (embedded type)
    ITEMDESCRIPTION
    CompatibilityTWAIN standard/WIA standard
    Scanning 
    methodColor CIS
    Resolutiona 
    a. Due to the applications for scanning, the maximum resolution might  differ. TWAIN 
    standard
    OpticalSCX-4x24 Series: 
    Up to 600 x 600 dpi
    SCX-4x28 Series: 
    Up to 1,200 x 1,200 dpi 
    (Scanner glass)
    Enhanced: Up to 4,800 x 4,800 dpi
    WIA standardb
    b. WIA standard supports only the optical resolution. SCX-4x24 Series: 
    Up to 600 x 600 dpi
    SCX-4x28 Series: 
    Up to 1,200 x 1,200 dpi (Scanner glass)
    Scan to USB 
    (SCX-4x28 
    Series only) 100, 200, 300 dpi
    Scan to E-mil 
    (SCX-4x28 
    Series only) 100, 200, 300 dpi
    Scan to PC 75, 150, 200, 300, 600 dpi
    Network 
    Scan File 
    format BMP, TIFF, PDF, JPEGc(color only)
    c. JPEG is not available when you select the mono mode in scan color.
    Effective 
    scanning 
    length • Scanner glass: 297 mm (11.7 inches)
    • ADF: 348 mm (13.7 inches)
    Effective 
    scanning 
    width Max. 208 mm (8.2 inches)
    Color bit 
    depth
    • Internal: 24 bit
    • External: 24 bit
    Mono bit 
    depth• 1 bit for Lineart & Halftone
    • 8 bit for gray scale
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Specifications_85
    COPIER SPECIFICATIONSFACSIMILE SPECIFICATIONS
    ITEMDESCRIPTION
    Copy Speeda
    a. Copy speed is based on Single Document Multiple Copy. • SCX-4x24 Series: Up to 24 cpm (A4), 25 cpm 
    (Letter)
    • SCX-4x28 Series: Up to 28 cpm(A4), 30 cpm (Letter)
    Copy 
    resolution Text Scan/Printing: Up to 600 x 600 dpi
    Text/
    photo
    Scan/Printing: Up to 600 x 600 dpi
    Photo Scan/Printing: Up to 600 x 600 dpi
    Zoom range • ADF: 25% to 100%
    • Scanner glass: 25% to 400%
    The fax feature may not be supported depending on machines.
    ITEMDESCRIPTION
    Compatibility ITU-T G3, ECM
    Applicable linePublic Switched Telephone Network (PSTN) or 
    behind PABX
    Data codingMH/MR/MMR/JBIG/JPEG
    Modem speed33.6 Kbps
    Transmission 
    speedUp to 3 seconds/pagea
    a. Standard resolution, MMR(JBIG), 
    Maximum modem speed, Phase ”C” 
    by ITU-T No. 1 chart, Memory Tx, ECM.
    Maximum 
    document length 356 mm (14 inches)
    Resolution
    • Standard: Up to 203 x 98 dpi
    • Fine/Photo: Up to 203 x 196 dpi
    • Super Fine: Up to 300 x 300 dpi (Receiving only)
    • Color:  Up to 200 x 200 dpi
    Memory 3.2 MB (Approx. 260 pages) 
    Halftone256 levels
    Downloaded From ManualsPrinter.com Manuals 
    						
    							86 _Glossary
    glossary
    ADF
    An Automatic Document Feeder  (ADF) is a mechanism that will 
    automatically feed an original sheet of paper so that the machine can 
    scan some amount of the paper at once. 
    AppleTalk
    AppleTalk is a proprietary suite of protocols developed by Apple, Inc for 
    computer networking. It was included  in the original Macintosh (1984) 
    and is now deprecated by Apple in favor of TCP/IP networking.
    BIT Depth
    A computer graphics term describing the number of bits used to 
    represent the color of a single pixel in a bitmapped image. Higher color 
    depth gives a broader range of distinct colors. As the number of bits 
    increases, the number of possible colors becomes impractically large for 
    a color map. 1-bit color is commonly called as monochrome or black and 
    white.
    BMP
    A bitmapped graphics format used internally by the Microsoft Windows 
    graphics subsystem (GDI), and used commonly as a simple graphics file 
    format on that platform.
    BOOTP
    Bootstrap Protocol. A network protoc ol used by a network client to 
    obtain its IP address automatically. Th is is usually done in the bootstrap 
    process of computers or operat ing systems running on them. The 
    BOOTP servers assign the IP address from a pool of addresses to each 
    client. BOOTP enables diskless workstation computers to obtain an IP 
    address prior to loading  any advanced operating system.
    CCD 
    Charge Coupled Device (CCD) is a hardware which enables the scan 
    job. CCD Locking mechanism is also used to hold the CCD module to 
    prevent any damage when you move the machine.
    Collation
    Collation is a process of printing a multiple-copy job in sets. When 
    collation is selected, the device prin ts an entire set before printing 
    additional copies.
    Control Panel
    A control panel is a flat, typically vertical, area where control or 
    monitoring instruments are displayed.  They are typically found in front of 
    the machine. 
    Coverage 
    It is the printing term used for a toner usage measurement on printing. 
    For example, 5% coverage means that an A4 sided paper has about 5% 
    image or text on it. So, if the paper or original has complicated images or 
    lots of text on it, the coverage will be higher and at the same time, a 
    toner usage will be as much as the coverage.
    CSV
    Comma Separated Values (CSV). A type of file format, CSV is used to 
    exchange data between disparate applicat ions. The file format, as it is 
    used in Microsoft Excel, has become a pseudo standard throughout the 
    industry, even among non-Microsoft platforms.
    DADF
    A Duplex Automatic Document Feeder (DADF) is a mechanism that will 
    automatically feed and flip over an or iginal sheet of paper so that the 
    machine can scan on both sides of the paper.
    Default
    The value or setting that is in effect when taking a printer out of its box 
    state, reset, or initialized.
    DHCP
    A Dynamic Host Configuration Prot ocol (DHCP) is a client-server 
    networking protocol. A DHCP server  provides configuration parameters 
    specific to the DHCP client host requesting, generally, information 
    required by the client host to participate on an IP network. DHCP also 
    provides a mechanism for allocation of IP addresses to client hosts.
    DIMM
    Dual Inline Memory Module (DIMM), a small circuit board that holds 
    memory. DIMM stores all the data wit hin the machine like printing data, 
    received fax data.
    DNS
    The Domain Name Server (DNS) is  a system that stores information 
    associated with domain names in a distributed database on networks, 
    such as the Internet.
    Dot Matrix Printer
    A dot matrix printer refers to a type  of computer printer with a print head 
    that runs back and forth on the page and prints by impact, striking an 
    ink-soaked cloth ribbon against the paper, much like a typewriter.
    DPI
    Dots Per Inch (DPI) is a measurement of resolution that is used for 
    scanning and printing. Generally, higher DPI results in a higher 
    resolution, more visible detail in the image, and a larger file size.
    DRPD 
    Distinctive Ring Pattern Detection. Distinctive Ring is a telephone 
    company service which enables a user to use a single telephone line to 
    answer several different telephone numbers.
    Duplex
    A mechanism that will automat ically flip over a sheet of paper so that the 
    machine can print (or scan) on both sides of the paper. A printer 
    equipped with a Duplex can print double-sided of paper.
    Duty Cycle
    Duty cycle is the page quantity which does not affect printer 
    performance for a month. Generally t he printer has the lifespan limitation 
    such as pages per year. The lifespan means the average capacity of 
    print-outs, usually within the warranty  period. For example, if the duty 
    cycle is 48,000 pages per month assu ming 20 working days, a printer 
    limits 2,400 pages a day.
    ECM
    Error Correction Mode (ECM) is an optional transmission mode built into 
    Class 1 fax machines or fax mode ms. It automatically detects and 
    corrects errors in the fax transmi ssion process that are sometimes 
    caused by telephone line noise.
    Emulation
    Emulation is a technique of one machine obtaining the same results as 
    another.
    The following glossary helps you get familiar with the product by 
    understanding the terminologies commonly used with printing as well 
    as mentioned in this users guide.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Glossary_87
    An emulator duplicates  the functions of one system with a different 
    system, so that the second system behaves like the first system. 
    Emulation focuses on exact reproduction of external behavior, which is 
    in contrast to simulation, which  concerns an abstract model of the 
    system being simulated, often considering its internal state.
    Ethernet
    Ethernet is a frame-based comput er networking technology for local 
    area networks (LANs). It defines wiring and signaling for the physical 
    layer, and frame formats and protoc ols for the media access control 
    (MAC)/data link layer of the OSI mode l. Ethernet is mostly standardized 
    as IEEE 802.3. It has  become the most widespr ead LAN technology in 
    use during the 1990s to the present.
    EtherTalk
    A suite of protocols developed by Apple Computer for computer 
    networking. It was included in the original Macintosh (1984) and is now 
    deprecated by Apple in favor of TCP/IP networking. 
    FDI
    Foreign Device Interface (FDI) is a card installed inside the machine to 
    allow a third party device such as a coin operated device or a card 
    reader. Those devices allow the pay-for-print service on your machine.
    FTP
    A File Transfer Protocol (FTP) is a commonly used protocol for 
    exchanging files over any network that supports the TCP/IP protocol 
    (such as the Internet or an intranet).
    Fuser Unit 
    The part of a laser printer that melt s the toner onto the print media. It 
    consists of a hot roller and a back-up roller. After toner is transferred 
    onto the paper, the fuser unit applies  heat and pressure to ensure that 
    the toner stays on the paper permane ntly, which is why paper is warm 
    when it comes out of a laser printer.
    Gateway
    A connection between computer networks, or between a computer 
    network and a telephone line. It is very  popular, as it is a computer or a 
    network that allows access to  another computer or network.
    Grayscale
    A shades of gray that represent li ght and dark portions of an image 
    when color images are converted to grayscale; colors are represented 
    by various shades of gray.
    Halftone
    An image type that simulates grayscale by varying the number of dots. 
    Highly colored areas consist of a large number of dots, while lighter 
    areas consist of a smaller number of dots.
    HDD
    Hard Disk Drive (HDD), commonly referred to as a hard drive or hard 
    disk, is a non-volatile storage device  which stores digitally-encoded data 
    on rapidly rotating platters with magnetic surfaces.
    IEEE
    The Institute of Electrical and El ectronics Engineers (IEEE) is an 
    international non-profit, professional organization for the advancement 
    of technology related to electricity.
    IEEE 1284
    The 1284 parallel port standard wa s developed by the Institute of 
    Electrical and Electronics Engineers (IEEE). The term 1284-B refers to 
    a specific connector type on the end of the parallel cable that attaches to 
    the peripheral (for example, a printer). 
    Intranet
    A private network that uses Internet  Protocols, network connectivity, and 
    possibly the public teleco mmunication system to se curely share part of 
    an organizations information or operations with its employees. 
    Sometimes the term refers only to the most visible service, the internal 
    website.
    IP address
    An Internet Protocol (IP) address is  a unique number that devices use in 
    order to identify and communicate with  each other on a network utilizing 
    the Internet Protocol standard.
    IPM
    The Images Per Minute (IPM) is a way of measuring the speed of a 
    printer. An IPM rate indicates the nu mber of single-sided sheets a printer 
    can complete within one minute.
    IPP
    The Internet Printing Protocol (I PP) defines a standard protocol for 
    printing as well as managing print jobs, media size, resolution, and so 
    forth. IPP can be used locally or  over the Internet to hundreds of 
    printers, and also supports acce ss control, authentication, and 
    encryption, making it a much more capable and secure printing solution 
    than older ones.
    IPX/SPX
    IPX/SPX stands for Internet  Packet Exchange/Sequenced Packet 
    Exchange. It is a networking protocol used by the Novell NetWare 
    operating systems. I PX and SPX both provide  connection services 
    similar to TCP/IP, with the IPX prot ocol having similarities to IP, and 
    SPX having similarities  to TCP. IPX/SPX was primarily designed for 
    local area networks (LANs), and is a  very efficient protocol for this 
    purpose (typically its performance ex ceeds that of TCP/IP on a LAN).
    ISO
    The International Organization for Standardization (ISO) is an 
    international standard-setting body composed of representatives from 
    national standards bodies. It produces world-wide industrial and 
    commercial standards.
    ITU-T
    The International Telecommunication Union is an international 
    organization established to standardiz e and regulate international radio 
    and telecommunications . Its main tasks include standardization, 
    allocation of the radio spectrum , and organizing interconnection 
    arrangements between different countries to allow international phone 
    calls. A -T out of ITU-T indicates telecommunication.
    ITU-T No. 1 chart
    Standardized test chart published by ITU-T for document facsimile 
    transmissions.
    JBIG
    Joint Bi-level Image Experts Group (JBIG) is an image compression 
    standard with no loss of accuracy or  quality, which was designed for 
    compression of binary images, particularly for faxes, but can also be 
    used on other images.
    JPEG
    Joint Photographic Experts Group (JPEG) is a most commonly used 
    standard method of lossy  compression for photograp hic images. It is the 
    format used for storing and transmitting photographs on the World Wide 
    Web.
    LDAP
    The Lightweight Directory Access Protocol (LDAP) is a networking 
    protocol for querying and modifying  directory services running over TCP/
    IP.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							88 _Glossary
    LED
    A Light-Emitting Diode (LED) is a semiconductor device that indicates 
    the status of a machine.  
    MAC address
    Media Access Control (MAC) address is a unique identifier associated 
    with a network adapter. MAC address is  a unique 48-bit identifier usually 
    written as 12 hexadecimal characters  grouped in pairs (e. g., 00-00-0c-
    34-11-4e). This address is usually  hard-coded into a Network Interface 
    Card (NIC) by its manufacturer, and used as an aid for routers trying to 
    locate machines on large networks.
    MFP
    Multi Function Peripheral (MFP) is an office machine that includes the 
    following functionality in one physical body, so as to have a printer, a 
    copier, a fax, a scanner and etc.
    MH
    Modified Huffman (MH) is a compression method for decreasing the 
    amount of data that needs to be tr ansmitted between the fax machines 
    to transfer the image recommended by ITU-T T.4. MH is a codebook-
    based run-length encoding scheme optimized to efficiently compress 
    white space. As most faxes consis t mostly of white space, this 
    minimizes the transmission  time of most faxes. 
    MMR
    Modified Modified READ (MMR)  is a compression method 
    recommended by ITU-T T.6.
    Modem
    A device that modulates a carrier signal to encode digital information, 
    and also demodulates such a carrier signal to decode transmitted 
    information.
    MR
    Modified Read (MR) is a compression method recommended by ITU-T 
    T.4. MR encodes the first scanned line using MH. The next line is 
    compared to the first, the differences determined, and then the 
    differences are encoded and transmitted.
    NetWare
    A network operating system developed by  Novell, Inc. It initially used 
    cooperative multitasking to run various services on a PC, and the 
    network protocols were based on  the archetypal Xerox XNS stack. 
    Today NetWare supports TCP/IP as well as IPX/SPX.
    OPC
    Organic Photo Conductor (OPC) is a mechanism that makes a virtual 
    image for print using a laser beam emitte d from a laser printer, and it is 
    usually green or gray colored and a cylinder shaped. 
    An exposing unit of a drum is slowly  worn away by its usage of the 
    printer, and it should be replaced app ropriately since it gets scratches 
    from grits of a paper.
    Originals
    The first example of something, such as a document, photograph or text, 
    etc, which is copied, reproduced or  translated to produce others, but 
    which is not itself copied or derived from something else.
    OSI
    Open Systems Interconnection (O SI) is a model developed by the 
    International Organization for Standard ization (ISO) for communications. 
    OSI offers a standard, modular approa ch to network design that divides 
    the required set of complex function s into manageable, self-contained, 
    functional layers. The layers are,  from top to bottom, Application, 
    Presentation, Session, Transport, Network, Data Link and Physical.
    PABX 
    A private automatic branch exchange (P ABX) is an automatic telephone 
    switching system within a private enterprise.
    PCL
    Printer Command Language (PCL) is a Page Description Language 
    (PDL) developed by HP as a printer protocol and has become an 
    industry standard. Originally develop ed for early inkjet printers, PCL has 
    been released in varying levels for thermal, matrix printer, and page 
    printers.
    PDF
    Portable Document Format (PDF) is a proprietary file format developed 
    by Adobe Systems for representing two dimensional documents in a 
    device independent and resolution independent format.
    PostScript
    PostScript (PS) is a page description language and programming 
    language used primarily in the electronic and desktop publishing areas. - 
    that is run in an interpreter to generate an image.
    Printer Driver
    A program used to send commands an d transfer data from the computer 
    to the printer.
    Print Media
    The media like paper, envelopes, labels, and transparencies which can 
    be used on a printer, a scanner, a fax or, a copier.
    PPM
    Pages Per Minute (PPM) is a method of measurement for determining 
    how fast a printer works, meaning the number of pages a printer can 
    produce in one minute.
    PRN file
    An interface for a device driver, this  allows software to interact with the 
    device driver using standard input/ output system calls, which simplifies 
    many tasks. 
    Protocol
    A convention or standard that cont rols or enables the connection, 
    communication, and data transfer between two computing endpoints.
    PS
    See PostScript.
    PSTN
    The Public-Switched Telephone Network (PSTN) is the network of the 
    worlds public circuit-switched telephone networks which, on industrial 
    premises, is usually routed through the switchboard.
    Resolution
    The sharpness of an image, measured in Dots Per Inch (DPI). The 
    higher the dpi, the greater the resolution.
    SMB
    Server Message Block (SMB) is a ne twork protocol mainly applied to 
    share files, printers, serial ports, and miscellaneous communications 
    between nodes on a network. It also provides an authenticated Inter-
    process communication mechanism.
    SMTP
    Simple Mail Transfer Protocol (SMTP) is the standard for e-mail 
    transmissions across the Internet. SM TP is a relatively simple, text-
    based protocol, where one or more recipients of a message are 
    specified, and then the message text is transferred. It is a client-server 
    protocol, where the client transmits  an email message to the server.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Glossary_89
    Subnet Mask 
    The subnet mask is used in conjunction with the network address to 
    determine which part of the address  is the network address and which 
    part is the host address.
    TCP/IP
    The Transmission Control Protocol (TCP) and the Internet Protocol (IP); 
    the set of communications protocols  that implement the protocol stack 
    on which the Internet and most commercial networks run.
    TCR
    Transmission Confirmation Report (TCR) provides details of each 
    transmission such as job status, tr ansmission result and number of 
    pages sent. This report can be set to print after each job or only after 
    failed transmissions.
    TIFF
    Tagged Image File Format (TIFF) is a variable-resolution bitmapped 
    image format. TIFF describes image data that typically come from 
    scanners. TIFF images make use of tags, keywords defining the 
    characteristics of the image that is in cluded in the file. This flexible and 
    platform-independent format can be used for pictures that have been 
    made by various image processing applications.
    Toner Cartridge
    A kind of bottle within a machine like printer which contains toner. Toner 
    is a powder used in laser printers and photocopiers, which forms the text 
    and images on the printed paper. Toner c an be melted by the heat of the 
    fuser, causing it to bind  to the fibers in the paper.
    TWAIN
    An industry standard for scanners and software. By using a TWAIN-
    compliant scanner with a TWAIN-compliant program, a scan can be 
    initiated from within the program.;  an image capture API for Microsoft 
    Windows and Apple Maci ntosh operating systems.
    UNC Path
    Uniform Naming Convention (UNC) is a standard way to access network 
    shares in Window NT and other Microsoft products. The format of a 
    UNC path is: \\\\
    URL
    Uniform Resource Locator (URL) is the global address of documents 
    and resources on the Internet. The first part of the address indicates 
    what protocol to use, the second pa rt specifies the IP address or the 
    domain name where the resource is located.
    USB
    Universal Serial Bus (USB) is a standard that was developed by the 
    USB Implementers Forum, Inc., to  connect computers and peripherals. 
    Unlike the parallel port, USB is designed to concurrently connect a 
    single computer USB port to multiple peripherals.
    Watermark
    A watermark is a recognizable image or pattern in paper that appears 
    lighter when viewed by transmitted light. Watermarks were first 
    introduced in Bologna, Italy in  1282; they have been used by 
    papermakers to identify their product, and also on postage stamps, 
    currency, and other government  documents to discourage 
    counterfeiting.
    WIA
    Windows Imaging Architecture (WIA) is  an imaging architecture that is 
    originally introduced in Windows Me and Windows XP. A scan can be 
    initiated from within t hese operating systems by  using a WIA-compliant 
    scanner.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							90_Index
    index
    A
    Address Book
    group dial numbers 52
    speed dial numbers 51
    Address Book, use 42
    ADF rubber pad, replace 61
    ADF, load 29
    adjustment
    altitude 26
    alarm sound 27
    Ans/Fax mode, receiving mode 47
    C
    characters, enter 27
    cleaning
    inside 57
    outside 57
    scan unit 58
    clock mode 26
    collation, special copy 37
    control panel 18
    copying
    2-up, 4-up 38
    clone 38
    collation 37
    darkness 36
    default setting, change 37
    ID card copy 37
    original type 36
    poster 38
    time out, set 39
    D
    date and time, set 26
    default mode, change 26
    delayed fax 48
    display language, change 26
    driver
    installation 25
    DRPD (Distinctive Ring Pattern Detection) 
    47
    F
    fax header, set 45
    Fax mode, receiving mode 47
    fax number, set 45
    faxing
    default settings, change 51
    delayed faxes 48
    fax setup 50
    forwarding faxes 49
    Multiple Send faxes 48
    priority faxes 49
    receiving faxes 46
    sending faxes 46
    Forwarding 49
    G
    Group dial numbers, set 52
    I
    ID card, special copy 37
    ID copy 18
    J
    jam
    clearing paper from the tray1 64
    tips for avoiding paper jams 63
    jam, clear
    document 63
    job timeout, set 28
    K
    key sound 27
    L
    LED
    Status 19
    Linux problems 76
    loading originals
    ADF 29
    scanner glass 29
    M
    machine ID, set 45
    Maintenance
    maintenance parts 61
    toner cartridge 59
    memory module
    installing 80
    ordering 79
    memory, clear 57
    Multiple Sned faxes 48
    N
    network
    setting up 23
    O
    optional tray 79
    originals
    jam, clear 63
    loading 29
    P
    paper
    changing the size 33
    clearing jam 64
    loading in the optional tray 33
    loading in the tray1 33
    printing special materials 34
    paper tray, set
    copy 36
    fax 46
    paper type
    setting 35
    PostScript
    problems 75
    power save mode 28
    print quality problems, solve 71
    printing
    reports 56
    USB memory 54
    priority fax 49
    problem, solve
    copying 73
    faxing 74
    Linux 76
    Network Scan 74
    paper feeding 69
    printing quality 71
    scanning 74
    Windows 75
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung SCX 4824FN User Manual