Samsung SCX 4728FD User Manual
Have a look at the manual Samsung SCX 4728FD User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
312. Menu overview and basic setup Menu overview The control panel provides access to various menus to set up the machine or use the machine’s functions. • An asterisk (*) appears next to the currently selected menu. • Some menus may not appear on the display depending on options or models. If so, it is not applicable to your machine. • Some menu names may differ from your machine depending on its options or the models. • SCX-470x Series does not support the fax features. 1 Accessing the menu 1Select the Fax, Copy, or Scan button on the control panel depending on the feature to be used. 2 Select ( Menu) until the menu you want appears on the bottom line of the display and press OK. 3 Press the left/right arrows until the ne eded menu item appears and press OK . 4 If the setting item has sub menus, repeat step 3. 5 Press the left/right arrows to access the required value. 6 Press OK to save the selection. 7 Press ( Stop/Clear ) to return to the ready mode. SCX-472x Series ItemsOptions Fax Feature aDarkness Light+5- Light+1 Normal Dark+1 - Dark+5 Contrast Light+5 - Light+1 Normal Dark+1 - Dark+5 Resolution Standard Fine Super Fine Photo Fax Color Fax Scan Size Multi Send Delay Send Downloaded From ManualsPrinter.com Manuals
Menu overview 322. Menu overview and basic setup Fax FeatureaPriority Send Forward FaxPC Secure Receive On Off Print Add Page Cancel Job Fax Setup aSending Redial Times Redial Term Prefix Dial ECM Mode Send Report Image TCR Dial Mode b ItemsOptions Fax SetupaReceiving Receive Mode Ring To Answer Stamp RCV Name RCV Start Code Auto Reduction Discard Size Junk Fax Setup DRPD Mode Duplex Print Change Default Resolution Darkness Contrast Scan Size Auto Report On Off Copy Feature Scan Size Reduce/Enlarge Darkness Light+5- Light+1 Normal Dark+1 - Dark+5 ItemsOptions Downloaded From ManualsPrinter.com Manuals
Menu overview 332. Menu overview and basic setup Copy Feature Contrast Light+5- Light+1 Normal Dark+1 - Dark+5 Original Type Text Text/Photo Photo Layout Normal 2-Up 4-Up ID copy Poster Copy Clone Copy Adjust Bkgd. Off Auto Enhance Lev.1 Enhance Lev.2 Erase Lev.1- Erase Lev.4 Duplex Off 1 -> 2 Side Long 1 -> 2 SideShort ItemsOptions Copy Setup Change Default Scan Size Copies Copy Collation Reduce/Enlarge Duplex Darkness Contrast Original Type Adjust Bkgd. Print Setup Orientation Portrait Landscape Duplex Off 1 -> 2 Side Long 1 -> 2 SideShort Copies [1-999]:1 Resolution 600dpi-Normal 1200dpi-Best Darkness Normal Light Dark ItemsOptions Downloaded From ManualsPrinter.com Manuals
Menu overview 342. Menu overview and basic setup Print Setup Clear Text OffMinimum Medium Maximum Auto CR LF LF+CR Emulation Emulation Type Setup ItemsOptions System Setup Machine Setup Machine ID Fax Number a Date & Time Clock Mode Language Power Save Wakeup Event System Timeout Job Timeout Altitude Adj. Auto Continue c Paper Mismatch Paper Substit c PrintBlankPage Toner Save Eco Settings Paper Setup Paper Size Paper Type Paper Source Margin ItemsOptions Downloaded From ManualsPrinter.com Manuals
Menu overview 352. Menu overview and basic setup System Setup Sound/Volume Key SoundAlarm Sound Speaker Ringer Report All Report Configuration Supplies Info. Address Book Fax Send a Fax Senta Fax Receiveda Schedule Jobs Junk Fax a Network Conf. Usage Counter Fax Options a MaintenanceCLR Empty Msgd Supplies Life Serial NO. TonerLow Alert ItemsOptions System Setup Clear Setting All Settings Print Setup Fax Setup a Copy Setup System Setup Network Setup Address Book Fax Sent a Fax Receiveda Network TCP/IP (IPv4) DHCPBOOTP Static TCP/IP (IPv6) IPv6 Activate DHCPv6 Config Ethernet Speed Automatic 10Mbps Half 10Mbps Full 100Mbps Half 100Mbps Full ItemsOptions Downloaded From ManualsPrinter.com Manuals
Menu overview 362. Menu overview and basic setup SCX-470x Series Network Clear SettingNetwork Conf. Wireless aWi-Fi ON/OFF WPS Setting WLAN Setting WLAN Default WLAN Signal a. SCX-472x Series Only. b. This setting may not be availa ble depending on your country. c. This option only appears if “paper mismatch” is enabled. d. This option only appears when small amount of toner is left in the cartridge. ItemsOptions Copy Feature Scan Size Reduce/Enlarge Darkness Light+5- Light+1 Normal Dark+1 - Dark+5 ItemsOptions Copy Feature Contrast Light+5 - Light+1 Normal Dark+1 - Dark+5 Original Type Text Text/Photo Photo Layout Normal 2-Up 4-Up ID copy Poster Copy Clone Copy Adjust Bkgd. Off Auto Enhance Lev.1 Enhance Lev.2 Erase Lev.1- Erase Lev.4 Duplex Off 1 -> 2 Side Long 1 -> 2 SideShort ItemsOptions Downloaded From ManualsPrinter.com Manuals
Menu overview 372. Menu overview and basic setup Copy Setup Change Default Scan SizeCopies Copy Collation Reduce/Enlarge Duplex Darkness Contrast Original Type Adjust Bkgd Print Setup Orientation Portrait Landscape Duplex Off 1 -> 2 Side Long 1 -> 2 SideShort Copies [1-999]:1 Resolution 600dpi-Normal 1200dpi-Best Darkness Normal Light Dark ItemsOptions Print Setup Clear Text Off Minimum Medium Maximum Auto CR LF LF+CR Emulation Emulation Type Setup ItemsOptions Downloaded From ManualsPrinter.com Manuals
Menu overview 382. Menu overview and basic setup System Setup Machine Setup Machine ID Date & Time Clock Mode Language Power Save Wakeup Event System Timeout Job Timeout Altitude Adj. Auto Continue a Paper Mismatch Paper Substit c Print Blank Page Toner Save Eco Settings Paper Setup Paper Size Paper Type Paper Source Margin ItemsOptions System Setup Report All Report Configuration Supplies Info. Scheduled Jobs Network Conf. Usage Counter Maintenance CLR Empty Msg b Supplies Life Serial Number Toner Low Alert System Setup Clear Setting All Settings Print Setup Copy Setup System Setup Network Setup ItemsOptions Downloaded From ManualsPrinter.com Manuals
Menu overview 392. Menu overview and basic setup Network TCP/IP (IPv4) DHCPBOOTP Static TCP/IP (IPv6) IPv6 Activate DHCPv6 Config Ethernet Speed Automatic 10Mbps Half 10Mbps Full 100Mbps Half 100Mbps Full Network Clear Setting Network Conf. a. This option only appears if “paper mismatch” is enabled. b. This option only appears when small amount of toner is left in the cartridge. ItemsOptions Downloaded From ManualsPrinter.com Manuals
402. Menu overview and basic setup Changing the display language To change the language that is displayed on the control panel, follow these steps: 1Select ( Menu) > System Setup > Machine Setup > Language on the control panel. It may be necessary to press OK to navigate to lower-level menus for some models. 2 Select the language you want to display on the control panel. 3 Press OK to save the selection. Downloaded From ManualsPrinter.com Manuals