Samsung SCX 4728FD User Manual

							Specifications
1115.  Appendix
4 
Network environment
 
Network and wireless models only (see "Features by models" on page 7).
 
You need to set up the network protocols on  the machine to use it as your network machine. The following table shows the networ k environments supported by the 
machine.
 
Free HDD space Up to 100 MB
ItemsSpecifications
Network interface • Ethernet 10/100 Base-TX Wired Lan
• 802.11b/g/n Wireless LAN (SCX-472x Series only)
Network operating system• Windows 2000/Server 2003 /Serve r 2008/XP/Vista/7/Server 2008 R2
•Various Linux OS
• Mac OS X 10.4 ~ 10.7
• Unix
ItemsRequirements
Downloaded From ManualsPrinter.com Manuals 
						

							Specifications
1125.  Appendix
 
Network protocols•TCP/IPv4
• DHCP, BOOTP
• DNS, WINS, Bonjour, SLP, UPnP
• Standard TCP/IP Printing (RAW), LPR, IPP, WSD
• SNMPv 1/2/3, HTTP, IPSec
• TCP/IPv6 (DHCP, DNS, RAW, LPR, SNMPv 1/2/3, HTTP, IPSec)
Wireless security • Authentication: Open System, Shared Key, WPA Personal, WPA2 Personal (PSK)
• Encryption: WEP64, WEP128, TKIP, AES
ItemsSpecifications
Downloaded From ManualsPrinter.com Manuals 
						

							1135.  Appendix
Regulatory information
This machine is designed for a normal work environment and certified with 
several regulatory statements.
5 
Laser safety statement
The printer is certified in the U.S. to conform to the requirements of DHHS 21 
CFR, chapter 1 Subchapter J for Class I(1) laser  products, and elsewhere is 
certified as a Class I laser product conf orming to the requirements of IEC 60825-
1 : 2007.
Class I laser products are not considered  to be hazardous. The laser system and 
printer are designed so ther e is never any human access  to laser radiation above 
a Class I level during norm al operation, user maintenan ce or prescribed service 
condition.
Warning 
Never operate or service  the printer with the protective cover removed from 
laser/scanner assembly. The reflected beam, although  invisible, can damage 
your eyes. When using this product, 
these basic safety precautions should always be 
followed to reduce risk  of fire, electric shock, and injury to persons:
6 
Ozone safety
This product’s ozone emission  rate is under 0.1 ppm. Because 
ozone is heavier than air, keep the product in a place with good 
ventilation.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information
1145.  Appendix
7 
Mercury Safety
8 
Power saver
9 
Recycling
10 
China only
Contains Mercury, Dispose According to Local, State or Federal 
Laws.(U.S.A. only)This printer contains advanced  energy conservation technology 
that reduces power consumption when it is not in active use.
When the printer does not receive data for an extended period of 
time, power consumption is automatically lowered. 
ENERGY STAR and the ENERGY STAR mark are registered U.S. 
marks. 
For more information on the ENERGY STAR program see http://
www.energystar.gov
For ENERGY STAR certified models, the ENRGY STAR label will be 
on your machine. Check if yo ur machine is ENERGY STAR 
certified.
Recycle or dispose of the packaging material for this product in an 
environmentally responsible manner.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information
1155.  Appendix
11 
Correct disposal of this product (Waste electrical & 
electronic equipment)
(Applicable in the european union and other 
european countries with separate collection 
systems)
(The United States of America only)
Dispose unwanted electronics through an  approved recycler. To find the nearest 
recycling location, go to our website:  www.samsung.com/recyclingdirect Or 
call, (877) 278 - 0799
12 
Correct disposal of batteries in this product
(Applicable in the European Union and other 
European countries with  separate battery return 
systems.)
This marking on the product, accessor ies or literature indicates that the 
product and its electronic  accessories (e.g. charger, headset, USB cable) 
should not be disposed of with ot her household waste at the end of 
their working life. To prevent possi ble harm to the environment or 
human health from uncontrolled wast e disposal, please separate these 
items from other s of waste and recy cle them responsibly to promote the 
sustainable reuse of material resources.
Household users should contact either the retailer where they 
purchased this product, or their local government office, for details of 
where and how they can take these items for environmentally safe 
recycling.
Business users should contact their  supplier and check the terms and 
conditions of the purchase contract. This product and its electronic 
accessories should not be mixed with other commercial wastes for 
disposal.
This marking on the batt ery, manual or packaging indicates that the 
batteries in this product should not be disposed with other 
household waste at the end of their working life. Where marked, the 
chemical symbols Hg, Cd or Pb indicate that the battery contains 
mercury, cadmium or lead above the reference levels in EC Directive 
2006/66. If batteries are not properly disposed of, these substances 
can cause harm to human health or the environment. To protect 
natural resources and to promote material reuse, please separate 
batteries from other s of waste and  recycle them through your local, 
free battery return system.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information
1165.  Appendix
13 
Taiwan only
14 
Radio frequency emissions
FCC information to the user
This device complies with Part 15 of the FCC Rules. Operation is  subject to the 
following two conditions: 
• This device may not cause  harmful interference, and
• This device must accept any interfere nce received, including interference 
that may cause undesired operation. This equipment has been tested and found 
to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed 
to provide reasonable protection again st harmful interference in a residential 
installation. This equipment generates,  uses and can radiate radio frequency 
energy and, if not installed and used in accordance  with the instructions, may 
cause harmful interference  to radio communications. However, there is no 
guarantee that interference wi ll not occur in a particular installation. If this 
equipment does cause harm ful interference to radio or telev ision reception, 
which can be determined  by turning the equipment  off and on, the user is 
encouraged to try to corr ect the interference by one or more of the following 
measures:
• Reorient or relocate  the receiving antenna.
• Increase the separat ion between the equipment and receiver.
• Connect the equipment in to an outlet on a circuit different from that to 
which the receiver is connected.
• Consult the dealer or  experienced radio TV technician for help.
 
Change or modifications not expressly approved by the manufacturer 
responsible for compliance could void  the user's authority to operate the 
equipment.
 
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information
1175.  Appendix
Canadian radio interference regulations
This digital apparatus does not exceed the Class B limits for radio noise 
emissions from digital apparatus as  set out in the interference-causing 
equipment standard entitled “Digital App aratus”, ICES-003 of the Industry and 
Science Canada.
Cet appareil numérique respecte les  limites de bruits radioélectriques 
applicables aux appareils nu mériques de Classe B prescrites dans la norme sur le 
matériel brouilleur: “Appareils Numériques” , ICES-003 édictée par l’Industrie et 
Sciences Canada.
15 
United States of America
Federal Communications Commission (FCC)
Intentional emitter per FCC Part 15
Low power, Radio LAN  devi ces (radio frequency (RF) wireless communication 
devices), operating in th e 2.4 GHz/5 GHz Band, may  be present (embedded) in 
your printer system. This secti on is only applicable if these devices are present. 
Refer to the system lab el to verify the presence of wireless devices.
Wireless devices that may be in your  system are only qualified for use in the 
United States of America  if an FCC ID number is on the system label. The FCC has set a general guideline of 20
 cm (8 inches) separation between the 
device and the body, for use of a wi reless device near the body (this does not 
include extremities). This device sho uld be used more than 20 cm (8 inches) 
from the body when wireless devices ar e on. The power output of the wireless 
device (or devices), which may be embedd ed in your printer, is well below the 
RF exposure limits  as set by the FCC.
This transmitter must not be collocated  or operation in conjunction with any 
other antenna or transmitter.
Operation of this device is subject to  the following two conditions: (1) This 
device may not cause harmfu l interference, and (2) this device must accept any 
interference received, including in terference that may cause undesired 
operation of the device.
 
Wireless devices are not user serviceabl e. Do not modify them in any way. 
Modification to a wireless device  will void the authorization to use it. 
Contact manufacturer for service.
 
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information
1185.  Appendix
FCC Statement for Wireless LAN use:
 
While installing and operating this transmitter and antenna combination 
the radio frequency exposure limit of 1m W/cm2 may be exceeded at 
distances close to the antenna installed.  Therefore, the user must maintain 
a minimum distance of 20cm from the antenna at all times. This device 
cannot be colocated with another transmitter and transmitting antenna.
 
16 
Russia only
17 
Germany only
18 
Turkey only
19 
Canada only
This product meets the appl icable Industry Canada techni cal specifications. / Le 
present materiel est conforme aux sp ecifications techniques applicables 
d’Industrie Canada.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information
1195.  Appendix
The Ringer Equivalence Number (REN) is an indication of the maximum number 
of devices allowed to be connected to a telephone interface. The termination of 
an interface may consist of any combin ation of devices subject only to the 
requirement that the sum of the RENs of  all the devices not exceed five. / L’indice 
d’equivalence de la sonnerie (IES)  sert a indiquer le nombre maximal de 
terminaux qui peuvent etre raccor des a une interface telephonique. La 
terminaison d’une interface peut consister  en une combinaison quelconque de 
dispositifs, a la seule con dition que la somme d’indi ces d’equivalence de la 
sonnerie de tous les disposi tifs n’excede pas cinq.
20 
Fax Branding
The Telephone Consumer Pr otection Act of 1991 makes it unlawful for any 
person to use a computer or other electron ic device to send any message via a 
telephone facsimile machine  unless such message clearly contains in a margin 
at the top or bottom of ea ch transmitted page or on  the first page of the 
transmission the fo llowing information:
1  the date and time of transmission
2  identification of either business, bu siness entity or individual sending the 
message; and
3  telephone number of either the sending  machine, business, business entity 
or individual. The Telephone Company may make chang
es in its communications facilities, 
equipment operations or procedures where  such action is reasonably required 
in the operation of its  business and is not incons istent with the rules and 
regulations in FCC Part 68. If such chan ges can be reasonably expected to render 
any customer terminal equipment in compatible with telephone company 
communications facilities, or  require modification or alteration of such terminal 
equipment, or otherwise  materially affect its use or performance, the customer 
shall be given adequate notice in writin g, to allow the customer an opportunity 
to maintain uninterrupted service
21 
Ringer Equivalence Number
The Ringer Equivalence Number and FCC  Registration Number for this machine 
may be found on the label located on the bo ttom or rear of the machine. In some 
instances you may need to provide th ese numbers to the telephone company.
The Ringer Equivalence Number (REN) is a  measure of the electrical load placed 
on the telephone line, and is useful  for determining whether you have 
“overloaded” the line. Install ing several s of equipment on the same telephone 
line may result in problems  making and receiving telephone calls, especially 
ringing when your line is  called. The sum of all Ring er Equivalence Numbers of 
the equipment on your telephone line should be less than five in order to assure 
proper service from the telephone company . In some cases, a sum of five may 
not be usable on your line. If any of  your telephone equipment is not operating 
properly, you should immediately remove it  from your telephone line, as it may 
cause harm to the telephone network.
Downloaded From ManualsPrinter.com Manuals 
						

							Regulatory information
1205.  Appendix
The equipment complies with Part 68 of the FCC rules and the requirements 
adopted by the ACTA. On the rear of this equipment is a label that contains, 
among other information, a product iden tifier in the format US:AAAEQ##TXXXX. 
If requested, this number must be pr ovided to the telephone company.
 
FCC Regulations state that changes or  modifications to this equipment not 
expressly approved by the manufacturer  could void the user’s authority to 
operate this equipment. In the event  that terminal equipment causes harm 
to the telephone network, the tele phone company should notify the 
customer that service may be stoppe d. However, where prior notice is 
impractical, the company may temporarily cease service, providing that 
they:
a  promptly notify the customer.
b  give the customer an opportunity to correct the equipment problem.
c  inform the customer of the right to bring a complaint to the Federal 
Communication Commission pursuant  to procedures set out in FCC 
Rules and Regulations Subpart E of Part 68.
 
You should also know that:
• Your machine is not designed to  be connected to a digital PBX system.
• If you intend to use a c omputer modem or fax modem on the same phone 
line as your machine, you may expe rience transmission and reception 
problems with all the  equipment. It is recommended that no other 
equipment, except for a regular telephone, share the line with your 
machine. • If your area experiences 
a high incidence of lightning or power surges, we 
recommend that you install surge pr otectors for both the power and the 
telephone lines. Surge protectors can be purchased  from your dealer or 
telephone and electronic specialty stores.
• When programming emergency numbe rs and/or making test calls to 
emergency numbers, use a non-em ergency number to advise the 
emergency service dispatcher of your  intentions. The dispatcher will give 
you further instructions on how to  actually test the emergency number.
• This machine may not be used on  coin service or party lines.
• This machine provides magnetic  coupling to hearing aids.
You may safely connect this equipment to  the telephone network by means of 
a standard modular jack, USOC RJ-11C.
22 
Replacing the Fitted Plug (for UK Only)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug 
and has a 13 amp fuse. When  you change or examine the fuse, you must re-fit 
the correct 13 amp f use. You then need to replace  the fuse cover. If you have lost 
the fuse cover, do not  use the plug until you  have another fuse cover. 
Contact the people from you purchased the machine.
Downloaded From ManualsPrinter.com Manuals