Samsung SCX 4728FD User Manual

							1412.  Using a Network-Connected Machine
Installing driver over the network
 
• Some features and optional goods may not be available depending on model or country (see "Feature s by models" on page 7).
• The machine that does not support th e network interface, it will not be 
able to use this feature (see "Rear view" on page 23).
 
6 
Windows
1Make sure that the machine is conne cted to the network and powered 
on. Also, your machine’s IP address should have been set (see "Setting IP 
address" on page 138).
 
If the “ Found New Hardware Wizard” appears during  the installation 
procedure, click  Cancel to close the window.
 
2 Insert the supplied software CD into your CD-ROM drive.
3 Select Install Now .
 
• The Custom Installation  allows you to select the machine’s connection 
and choose individual components to  install. Follow the instructions on 
the window.
• SCX-470x Series does not support the  Wireless Setting and Installation 
menu.
 
4 Read  License Agreement , and select I accept the terms of the License 
Agreement . Then, click Next .
The program searches for the machine.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network
1422.  Using a Network-Connected Machine
 
If your machine is not found on the network or locally, an error message 
appears. Select the option you want and click  Next.
 
5 The searched machines will be shown on  the screen. Select the one you 
wish to use and click  OK.
 
If the driver searched only one machine, the confirmation window appears.
 
6 Follow the instructions in  the installation window.
Silent installation Mode
Silent installation mode is  an installation method that  does not require any user 
intervention. Once you start the installa tion, the machine driver and software 
are automatically installed on  you computer. You can start the silent installation 
by typing  /s or  /S in the command window.
Command-line Parameters
Following table shows comm ands that can be used in the command window.
 
Following command-line are effectiv e and operated when command is 
used with /s  or /S. But /h , /H  or  /? are exceptional commands that can be 
operated solely.
 
Command- lineDefinitionDescription
/s or
/S Starts silent installation.  Installs machine drivers 
without prompting any UIs or 
user intervention.
/p”” or
/P””Specifies printer port.
 
Network Port will be 
created by use of 
Standard TCP/IP 
Port monitor. For 
local port, this port 
must exist on 
system before 
being specified by 
command.
 
Printer port name can be 
specified as IP address, 
hostname, USB local port 
name or IEEE1284 port name.
For example:
•  /p”xxx.xxx.xxx.xxx” in 
where, “xxx.xxx.xxx.xxx” 
means IP address for 
network printer. /
p”USB001”, /P”LPT1:”, /
p”hostname”
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network
1432.  Using a Network-Connected Machine
/a”” or
/A””Specifies destination path 
for installation.
 
The destination 
path should be a 
fully qualified path.
 
Since machine drivers should 
be installed on the OS specific 
location, this command 
applies to only application 
software.
/i”” 
or
/I””Specifies customized install 
script file for custom 
operation.
 
The script filename 
should be a fully 
qualified filename.
 
Customized script file can be 
assigned for customized 
silent installation. This script 
file can be created or 
modified through provided 
installer customizing utility or 
by text editor.
 
This customized 
script file is prior than 
default installer 
setting in setup 
package but not prior 
than command-line 
parameters.
 
Command- lineDefinitionDescription
/n”” 
or
/N”” Specifies printer name. 
Printer instance shall be 
created as specified printer 
name. With this parameter, you can 
add printer instances as your 
wishes.
/nd or
/ND
Commands not to set the 
installed driver as a default 
machine driver. It indicates installed machine 
driver will not be the default 
machine driver on your 
system if there are one or 
more printer drivers installed. 
If there is no installed 
machine driver on your 
system, then this option 
won’t be applied because 
Windows OS will set installed 
printer driver as a default 
machine driver.
/x or
/X
Uses existing machine 
driver files to create printer 
instance if it is already 
installed. This command provides a 
way to install a printer 
instance that uses installed 
printer driver files without 
installing an additional driver.
Command- lineDefinitionDescription
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network
1442.  Using a Network-Connected Machine
7 
Macintosh
1Make sure that the machine is connected to your network and powered 
on.
2 Insert the supplied software CD  into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your Macintosh desktop.
4 Double-click the MAC_Installer folder >  Installer OS X icon.
5  Click Continue .
6 Read the license agreement and click  Continue.
7 Click Agree  to agree to the  license agreement.
8 When the message which warns that a ll applications will close on your 
computer appears, click  Continue.
9 Click Continue  on the User Options Pane .
/up”” or
/UP”” Removes only specified 
printer instance and not the 
driver files.
This command provides a 
way to remove only specified 
printer instance from your 
system without effecting 
other printer drivers. It will 
not remove printer driver files 
from your system.
/d or
/D
Uninstalls all device drivers 
and applications from your 
system. This command will remove all 
installed device drivers and 
application software from 
your system.
/v”” or
/V””
Shares installed machine 
and add other available 
platform drivers for Point & 
Print. It will install all supported 
Windows OS platform’s 
machine drivers to system 
and share it with specified 
 for point and 
print.
/o or 
/O
Opens 
Printers and Faxes  
folder after installation. This command will open 
Printers and Faxes
 folder 
after the silent installation.
/f”” 
or
/F”” Specifies log filename.
The default log file is 
created in the system temp 
folder if not specified. It will create a log file to a 
specified folder.
Command- lineDefinitionDescription
/h, /H or /?
Shows Command-line Usage.
Command- lineDefinitionDescription
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network
1452.  Using a Network-Connected Machine
 
If you have not set the IP address yet, click Set IP address and refer to "IPv4 
configuration using SetIP (Macintosh)" on page 139. If you want to set the 
wireless setting, refer to "Setup using Macintosh" on page 165.
 
10 Click  Install. All components necessary for machine  operations will be 
installed.
If you click  Customize , you can choose individual  components to install.
11 Enter the password and click OK .
12 Installing software requires you to restart your computer. Click Continue 
Installation .
13 After the installation  is finished, click Restart.
14 Open the Applications  folder > Utilities > Print Setup Utility .
• For Mac OS X 10 .5-10.7, open the Applications folder > System 
Preferences  and click Print & Fax .
15 Click Add on the  Printer List .
• For Mac OS X 10.5 -10.7, click the “+” icon. A display window will pop 
up. 
16 For Mac OS X 10.4, click  IP Printer.
• For Mac OS X 10.5-10.7, click  IP.
17 Select  HP Jetdirect - Socket  in Protocol .
 
When printing a document containing many pages, printing performance 
may be enhanced by choosing  Socket for Printer Type  option.
 
18 Enter the machine’s IP address in the  Address input field.
19 Enter the queue name in the  Queue input field. If you cannot determine 
the queue name for your machine se rver, try using the default queue 
first.
20 For Mac OS X 10.4, if Auto Selec t does not work properly, select  Samsung 
in  Print Using  and your machine name in  Model. 
• For Mac OS X 10.5-10.7,  if Auto Select does not work properly, choose 
Select Printer Software  and your machine name in Print Using .
21 Click Add.
Your machine appears in the  Printer List, and is set as the default 
machine.
 
To install the fax driver: 
a  Open the  Applications  folder > Samsung  > Fax Queue Creator .
b  Your machine appears on the Printer List .
c  Select machine to use and Click  Create button.
 
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network
1462.  Using a Network-Connected Machine
8 
Linux
You need to download Linux software packages from the Samsung website to 
install the printer software (http:// www.samsung.com > find your product > 
Support or Downloads).
 
To install other software:
• See "Installing the Smart Panel" on page 133.
• See "Installing the Printer Settings Utility" on page 134.
 
Install the Linux driver and add network printer
1Make sure that the machine is conne cted to your network and powered 
on. Also, your machine’s IP  address should have been set. 
2 Download the Unified Linux Driver package from  the Samsung website.
3 Extract the UnifiedLinuxDriver.tar .gz file and open the new directory.
4 Double-click the Linux folder >  install.sh  icon.
5 The Samsung installer  window opens. Click Continue.
6 The add printer wizard  window opens. Click Next.
7 Select network printer and click  Search button.
8 The machine’s IP address and mod el name appears on list field.
9 Select your machine and click Next.
10 Input the printer description and  Next.
11 After the machine is added, click  Finish.
12 When installation is done, click  Finish.
Add a network printer
1Double-click the  Unified Driver Configurator .
2 Click Add Printer.
3 The Add printer wizard  window opens. Click  Next.
4 Select  Network printer  and click the Search button.
5 The printer’s IP address and mod el name appears on list field.
6 Select your machine and click Next.
7 Enter the printer d escription and click  Next.
8 After the machine is added, click  Finish.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network
1472.  Using a Network-Connected Machine
9 
UNIX
 
• Make sure your machine supports the UNIX operating system before 
installing the UNIX printer driver (see "Operating System" on page 7).
• The commands are marked with “”,  when typing the commands, do not 
type “”.
• Some features and optional goods may not be available depending on  model or country (see "Operating System" on page 7).
 
To use the UNIX printer driver, you have to install  the UNIX printer driver 
package first, then setup th e printer. You can download the UNIX  printer driver 
package from the Samsun g website ((http://www.sam sung.com > find your 
product > Support or Downloads).
Installing the UNIX printer driver package
The installation procedure is  common for all variants of UNIX OS mentioned.
1From the Samsung website, downloa d and unpack the UNIX Printer 
Driver package to your computer. 
2 Acquire root privileges.
“ su - ”
3 Copy the appropriate driver archi ve to the target UNIX computer.
 
See administration guide of your UNIX OS for details.
 
4 Unpack the UNIX printer driver package.
For example, on IBM AIX, use the following commands.
“ gzip -d <  enter the package name  | tar xf -”
5 Go to the unpacked directory.
6 Run the install script.
“./install”
install  is the installer script  file which is used to install or uninstall the 
UNIX Printer Driver package.
Use “ chmod 755 install ” command to give the permission to the 
installer script.
7 Execute the “ . /install –c” command to verify  installation results.
8 Run “installprinter ” from the command line. This will bring up the  Add 
Printer Wizard  window. Setup the printer in  this window referring to 
the following procedures.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network
1482.  Using a Network-Connected Machine
 
On some UNIX OS, for example on Solaris 10, just added printers may not be 
enabled and/or may not accept jobs. In this case run the following two 
commands on the root terminal:
“ accept  ”
“ enable  ”
 
Uninstalling the printer driver package
 
The utility should be used to delete the printer installed in the system.
a  Run “ uninstallprinter ” command from the terminal.
It will open the Uninstall Printer Wizard .
The installed printers are li sted in the drop-down list.
b  Select the printer to be deleted.
c  Click  Delete  to delete the printer from the system.
d  Execute the “ . /install –d” command to uninstall the whole package.
e  To verify removal results, execute the “ . /install –c” command.
 
To re-install it, use the command “ . /install” to reinstall the binaries.
Setting up the printer
To add the printer to your UNIX system, run ‘install printer’ from the command 
line. This will bring up th e Add Printer Wizard window.  Setup the printer in this 
window according to the following steps:
1Type the name of the printer.
2 Select the appropriate printer  model from the model list.
3 Enter any description corr esponding to the type of the printer in the 
Type  field. This is optional.
4 Specify any printer  description in the Description field. This is optional.
5 Specify the printer  location in the Location field.
6 Type the IP address or DNS na me of the printer in the Device textbox for 
network-connected printers. On IBM AIX with  jetdirect Queue type , 
only the DNS name is possible-nu meric IP address is not allowed.
7 Queue type shows the connection as  lpd or jetdirect  in the 
corresponding list box. Additionally,  usb type is available on Sun Solaris 
OS.
8 Select  Copies  to set the numb er of copies.
9 Check the Collate option to receive copies already sorted.
10 Check the  Reverse Order  option to receive copies  in the reverse order.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network
1492.  Using a Network-Connected Machine
11 Check the Make Default  option to set this printer as default.
12 Click OK to add the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							1502.  Using a Network-Connected Machine
IPv6 configuration
 
IPv6 is supported properly only in Windows Vista or higher.
 
 
• Some features and optional goods may not be available depending on 
model or country (see "Featu res by models" on page 7 or "Menu 
overview" on page 31).
• If the IPv6 network seems to not be working, set all the network setting  to the factory defaults and try again using  Clear Setting.
 
In the IPv6 network environment, foll ow the next procedure to use the IPv6 
address.
10 
From the control panel
1Connect your machine to the  network with a network cable.
2 Turn on the machine.
3 Print a Network Configuration Report  that will check IPv6 addresses 
(see "Printing a networ k configuration report" on page 138).
4 Select Start > Control Panel >  Printers and Faxes .
5 Click Add a printer  in the left pane of the  Printers and Faxes  windows.
6 Click Add a local printer  in the Add Printer  windows.
7 The Add Printer Wizard  window appears. Follow the instructions in the 
window.
 
If the machine does not work in the  network environment, activate IPv6. 
Refer to the next section followed by.
 
Activating IPv6
1Press the   ( Menu) button on the control panel.
2 Press Network  > TCP/IP (IPv6)  > IPv6 Activate .
3 Select On and press  OK.
4 Turn the machine off and turn it on again.
5 Reinstall your printer driver.
Downloaded From ManualsPrinter.com Manuals