Home > Samsung > Printer > Samsung SCX 4728FD User Manual

Samsung SCX 4728FD User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Samsung SCX 4728FD User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Regulatory information
    1215.  Appendix
    The 13 amp plug is the most widely used in the UK and should be suitable. 
    However, some buildings (main ly old ones) do not have normal 13 amp plug 
    sockets. You need to buy  a suitable plug adaptor. Do not remove the moulded 
    plug.
     
    If you cut off the moulded plug, get rid of it straight away.
    You cannot rewire the plug and you ma y receive an electric shock if you 
    plug it into a socket.
     
    Important warning: 
    If the wires in the mains lea d do not match the colors marked in your plug, do 
    the following:
    You must connect the green and yellow wire  to the pin marked by the letter “E” 
    or by the safety ‘Earth symbol’ or  colored green and yellow or green.
    You must connect the blue wire to the pin  which is marked with the letter “N” or 
    colored black. You must connect the brown wire to the 
    pin which is marked with the letter “L” 
    or colored red.
    You must have a 13 amp f use in the plug, adaptor, or  at the distribution board.
    23 
    Declaration of conformity (European countries)
    Approvals and Certifications
    January 1, 1995: Council Directive 2006/95/EC  Approximation of the laws of 
    the member states r elated to low voltage equipment.
    January 1, 1996:  Council Directive 2004/108/EC,  approximation of the laws of 
    the Member States related to  electromagnetic compatibility.
    You must earth this machine.
    The wires in the mains lead have the following color code:
    •Green and Yellow:  Earth
    • Blue:  Neutral
    • Brown:  Live
    Hereby, Samsung Electronics, declar es that this [SCX-470xND Series] 
    is incompliance with the essential requirements and other 
    relevantprovisions of Low Voltage Directive (2006/95/EC), EMC 
    Directive (2004/108/EC).
    Hereby, Samsung Electronics, declar es that this [SCX-472xFW Series, 
    SCX-472xHW Series, SCX-472xFD Se ries, SCX-472xHD Series, SCX-
    472xHN Series, SCX-470xDN Series ] is in compliance with the 
    essential requirements and othe r relevant provisions of R&TTE 
    Directive 1999/5/EC.
    The declaration of conformity may be consulted at 
    www.samsung.com , go to Support > Download center and enter 
    your printer (MFP) name to browse the EuDoC. 
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Regulatory information
    1225.  Appendix
    March 9, 1999: Council Directive 1999/5 /EC on radio equipment and 
    telecommunications terminal equipment and the mutual recognition of their 
    conformity. A full declaration , defining the relevant Directives and referenced 
    standards can be obtain ed from your Samsung Electronics Co., Ltd. 
    representative.
    EC Certification
    Certification to 1999/ 5/EC Radio Equipment & Te lecommunications Terminal 
    Equipment Directive (FAX)
    This Samsung product has been self-cer tified by Samsung for pan-European 
    single terminal connection to the anal ogue public switched telephone network 
    (PSTN) in accordance with Directive 19 99/5/EC. The product has been designed 
    to work with the national PSTNs and compatible PBXs of the European 
    countries:
    In the event of problems,  you should contact the Euro QA Lab of Samsung 
    Electronics Co., Ltd.  in the first instance.
    The product has been tested against TBR21. To assist in the use and application 
    of terminal equipment which complies  with this standard, the European 
    Telecommunication Standards Institute (ETSI) has issued an advisory do\
    cument 
    (EG 201 121) which cont ains notes and additional  requirements to ensure 
    network compatibility of  TBR21 terminals. The prod uct has been designed 
    against, and is fully compliant with, all of the relevant  advisory notes contained 
    in this document.
    European radio approval information (for products 
    fitted with EU-approved radio devices)
    Low power, Radio LAN typ e devices (radio frequency (RF) wireless 
    communication devices), operating in  the 2.4 GHz/5 GHz band, may be present 
    (embedded) in your printer syst em which is intended for home or office use. This 
    section is only applicable if these devic es are present. Refer to the system label 
    to verify the presence  of wireless devices.
    The power output of the wi reless device or devices that may be embedded in 
    you printer is well below  the RF exposure limits as set by the European 
    Commission through the R&TTE directive.
    European states qualified under wireless approvals:
    EU countries
    European states with  restrictions on use:
    EU
    In France, the frequency range is restr icted to 2454-2483.5 MHz for devices 
    above 10 mW transmitting  power such as wireless
    EEA/EFTA countries
    Wireless devices that may be in your system are only 
    qualified for use in the European Union or associated 
    areas if a CE mark with a Notified Body Registration 
    Number and the Alert Symbol  is on the system label.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Regulatory information
    1235.  Appendix
    No limitations at this time
    24 
    Israel only
    25 
    Regulatory compliance statements
    Wireless guidance
    Low power, Radio LAN devices (radio frequency (RF) wireless communication 
    devices), operating in th e 2.4 GHz/5 GHz Band, may  be present (embedded) in 
    your printer system. The following sec tion is a general overview of 
    considerations while opera ting a wireless device.
    Additional limitations, cautions, and concer ns for specific countries are listed in 
    the specific country sections (or country group sections). The wireles\
    s devices in 
    your system are only qualifie d for use in the countries identified by the Radio 
    Approval Marks on the system  rating label. If the country you will be using the 
    wireless device in, is not  listed, contact your local  Radio Approval agency for 
    requirements. Wireless devi ces are closely regulated and use may not be 
    allowed. The power output of the wi
    reless device or devices that may be embedded in 
    your printer is well below the RF exposure limits as know n at this time. Because 
    the wireless devices (whi ch may be embedded into  your printer) emit less 
    energy than is allowed  in radio frequency safety standards and 
    recommendations, manufac turer believes these devices are safe for use. 
    Regardless of the power levels, care shou ld be taken to minimize human contact 
    during normal operation.
    As a general guideline, a  separation of 20 cm (8 inches) between the wireless 
    device and the body, for use of a wi reless device near the body (this does not 
    include extremities) is typic al. This device should be used more than 20 cm (8 
    inches) from the body when wireless devices are  on and transmitting.
    This transmitter must not be collocated  or operation in conjunction with any 
    other antenna or transmitter.
    Some circumstances require restriction s on wireless devices. Examples of 
    common restrictions  are listed below:Radio frequency wireless communication can interfere with equipment 
    on commercial aircraft. Current aviation regulations require wireless 
    devices to be turned off while traveling in an airplane. IEEE 802.11 (also 
    known as wireless Ethernet) and Bl uetooth communication devices are 
    examples of devices that provide wireless communication.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Regulatory information
    1245.  Appendix
    In environments where the risk of interference to other devices or 
    services is harmful or perceived as harmful, the option to use a wireless 
    device may be restricted or eliminated. Airports, Hospitals, and Oxygen 
    or flammable gas laden atmospheres  are limited examples where use of 
    wireless devices may be restricted or eliminated. When in environments 
    where you are uncertain of the sanction to use wireless devices, ask the 
    applicable authority for authorizatio n prior to use or turning on the 
    wireless device.
    Every country has different restrictions on the use of wireless devices. 
    Since your system is equipped with a wireless device, when traveling 
    between countries with your syst em, check with the local Radio 
    Approval authorities prior to any move  or trip for any restrictions on the 
    use of a wireless device in the destination country.
    If your system came equipped wi th an internal embedded wireless 
    device, do not operate the wireless device unless all covers and shields 
    are in place and the system is fully assembled.
    Wireless devices are not user serviceable. Do not modify them in any 
    way. Modification to a wireless device will void the authorization to use 
    it. Contact manufacturer for service.
    Only use drivers approved for the country in which the device will be 
    used. See the manufacturer System  Restoration Kit, or contact 
    manufacturer Technical Support  for additional information.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							Regulatory information
    1255.  Appendix
    26 
    China only
    Downloaded From ManualsPrinter.com Manuals 
    						
    							1265.  Appendix
    Copyright
    © 2011 Samsung Electronics Co., Ltd. All rights reserved.
    This user’s guide is provided fo r information purposes only. All information includ ed herein is subject to change without notic e.
    Samsung Electronics is not respon sible for any direct or indirect damages, arisin g from or related to use of this user’s guide.
    • Samsung and the Samsung logo are trad emarks of Samsung Electronics Co., Ltd.
    • Microsoft, Windows, Windows Vista, Windows 7,  and Windows Server 2008 R2 are either registered trademarks or trademarks of Mic rosoft Corporation.
    • True, LaserWriter, and Macintosh are  trademarks of Apple Computer, Inc.
    • All other brand or prod uct names are trademarks of their respective  companies or organizations.
    Refer to the ' LICENSE.txt' file in the provided  CD-ROM for the open source license information.
    REV. 1.1
    Downloaded From ManualsPrinter.com Manuals 
    						
    							ADVANCED
    User’s Guide
    SCX-472x Series
    SCX-470x Series
    ADVANCED
    User’s Guide
    This guide provides information about installation, advanced configuration, 
    operation and troubleshooting on various OS environments. 
    Some features may not be available depending on models or countries.
    BASIC
    This guide provides information concerning installation, basic  operation and troubleshooting 
    on windows.
    Downloaded From ManualsPrinter.com Manuals 
    						
    							128
    ADVANCED
    1. Software Installation
    Installation for Macintosh 131
    Reinstallation for Macintosh  132
    Installation for Linux  133
    Reinstallation for Linux  135
    2. Using a Network-Connected 
    Machine
    Useful network programs  137
    Wired network setup  138
    Installing driver over the network  141
    IPv6 configuration  150
    Wireless network setup  153
    3. Useful Setting Menus
    Before you begin reading a chapter 177
    Print menu  178
    Copy menu  179
    Fax menu  186Scan menu 
    190
    System setup  192
    Admin setup  204
    Custom setup  205
    4. Special Features
    Altitude adjustment 207
    Storing email address  208
    Entering various characters  210
    Setting up the fax address book  211
    Registering authorized users  214
    Printing features  215
    Scan features  230
    Fax features  241
    Using shared folder features  252
    Using memory/hard drive features  253
    5. Useful Management Tools
    Easy Capture Manager 255
    Samsung AnyWeb Print  256
    Easy Eco Driver  257
    Downloaded From ManualsPrinter.com Manuals 
    						
    							129
    ADVANCED
    Using SyncThru™ Web Service 258
    Using Samsung Easy Printer Manager  261
    Using Samsung Printer Status  264
    Using Smart Panel  266
    Using the Linux Unified Driver Configurator  268
    6. Troubleshooting
    Paper feeding problems 273
    Power and cable connecting problems  274
    Printing problems  275
    Printing quality problems  279
    Copying problems  287
    Scanning problems  288
    Faxing problems  290
    Operating system problems  292
    Downloaded From ManualsPrinter.com Manuals 
    						
    							1. Software Installation
    This chapter provides instructions for installing essential and helpful softwar e for use in an environment where the 
    machine is connected via a cable. A loca lly connected machine is a machine directly attached to your computer using 
    the cable. If your machine is attached to a network, skip the following steps be low and go on to installing a network 
    connected machine’s driver (see "Installing  driver over the network" on page 141).
    • Installation for Macintosh 131
    • Reinstallation for Macintosh 132
    • Installation for Linux 133
    • Reinstallation for Linux 135
     
    • If you are a Windows OS user, refer to the Basic Guide for installing the machine’s driver (see 
    "Installing the driver locally" on page 28).
    • Only use a USB cable no longer then 3 meter (118 inches).
     
    Downloaded From ManualsPrinter.com Manuals 
    						
    All Samsung manuals Comments (0)

    Related Manuals for Samsung SCX 4728FD User Manual