Samsung SCX 4728FD User Manual
Have a look at the manual Samsung SCX 4728FD User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Wireless network setup 1612. Using a Network-Connected Machine •Confirm Network Key: Confirm the encryption network key value. • WEP Key Index: If you are using WEP Encryption, select the appropriate WEP Key Index . The wireless network security window appears when the access point has security settings. The wireless network security window appears. The window may differ according to its security mode: WEP, or WPA. • WEP Select Open System or Shared Key for the authentication and enter the WEP security key. Click Next. WEP (Wired Equivalent Privacy) is a security protocol preventing unauthorized access to your wireless network. WEP encrypts the data portion of each packet exchanged on a wireless network using a 64-bit or 128-bit WEP encryption key. • WPA Enter the WPA shared key and click Next. WPA authorizes and identifies users based on a secret key that changes automatically at regular intervals. WPA also uses TKIP (Temporal Key Integrity Protocol) and AES (Advance d Encryption Standard) for data encryption. 8 The window shows the wireless netwo rk settings and checks if the settings are correct. Click Next. • For the DHCP method If the IP address assignment method is DHCP, check if DHCP is shown in the window. If it shows Static, click Change TCP/IP to change the assignment method to DHCP. • For the Static method If the IP address assignment method is Static, check if Static is shown in the window. If it shows DHCP, click Change TCP/IP to enter the IP address and other netw ork configuration values for the machine. Before entering the IP address for the machine, you must know the computer’s network conf iguration information. If the computer is set to DHCP, you must co ntact the network administrator to get the static IP address. For example: If the computer’s network information is as shown below: - IP address: 169.254.133.42 - Subnet Mask: 255.255.0.0 Then, the machine’s network info rmation should be as follows: - IP address: 169.254.133. 43 - Subnet Mask: 255.25 5.0.0 (Use the computer’s subnet mask.) - Gateway: 169.254.133. 1 9 When the wireless network setting is completed, disconnect the USB cable between the computer and machine. Click Next. Downloaded From ManualsPrinter.com Manuals
Wireless network setup 1622. Using a Network-Connected Machine 10 The Wireless Network Setting Complete window appears. Select Yes if you accept the current settings and continue the setup procedure. Select No if you want to return to the beginning screen. Then, click Next . 11 Click Next when the Confirm Printer Connection window appears. 12 Select the components to be installed. Click Next. 13 After selecting the components, you can also change the machine name, set the machine to be shared on the network, set the machine as the default machine, and change the por t name of each machine. Click Next. 14 After the installation is finished, a window asking you to print a test page appears. If you want to print a test page, click Print a test page. Otherwise, just click Next and go to step 16. 15 If the test page prints out correctly, click Yes. If not, click No to reprint it. 16 To register as a user of the machine in order to receive information from Samsung, click On-line Registration . 17 Click Finish . Ad hoc via USB cable If you do not have an access point (AP), you may still connect the machine wirelessly to your computer by setting up an ad-hoc wireless network by following the simple steps below. Items to prepare • Network-connected computer • Software CD that was prov ided with your machine • The machine installed with a wireless network interface • USB cable Creating the ad hoc network in Windows 1Check whether the USB cable is connected to the machine. 2 Turn on your computer and the wireless network machine. 3 Insert the supplied software CD into your CD-ROM drive. Click Start > All programs > Accessories > Run . Type X:\ Setup.exe replacing “X” with the let ter, which represents your CD-ROM drive and click OK. Downloaded From ManualsPrinter.com Manuals