Samsung LCD TV LN26A330J1D Specifications

							
English - 4
The Digital Captions function operates on digital channels.
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select “Setup”, then press the ENTER  button.
2.	Press the ▲ or ▼ button to select “Caption”, then press the ENTER  button.
3.	Press the ENTER  button to select “Caption”.    Press the ▲ or ▼ button to select “On”, then press the ENTER  button.
	4.		Press the ▲ or ▼ button to select “Caption Mode”, then press the ENTER  button. Press the ▲ or ▼ button to select submenu (Default, Service1~Service6,CC1~CC4 or Text1~Text4) you want, then press the ENTER  button.
5.	Press the ▲ or ▼ button to select “Caption Options”, then press the ENTER       button.
  “Caption Options” are available only when “Default” and “Service 1~Service 6” can be selected in “Caption Mode”.
 Service1~6 in digital caption mode may not be available depending on the      broadcast.
6.	Press the ▲ or ▼ button to select “Size”, then press the ENTER  button.    Press the ▲ or ▼ button to select the desired Caption option, then press the    ENTER  button.    Press the ▲ or ▼ button to select the desired sub-menu options     (see options below), then press ENTER  button.
   Press the ExIT button to exit.
 The availability of captions depends on the program being broadcast.  “Default” means to follow the standard set by the broadcaster.  Foreground and Background cannot be set to have the same color.   
“Foreground Opacity” and “Background Opacity” cannot be both set to Transparent.
• Size: This option consists of “Default”, “Small”, “Standard” and “Large”. The       default is “Standard”. • Font Style: This option consists of “Default”, “Style0 ~ Style 7”. You can          change the font you want. The default is “Style 0”. • Foreground Color: This option consists of “Default”, “White”, “Black”, “Red”,            “Green”, “Blue”, “Yellow”, “Magenta” and “Cyan”. You can            change the color of the letter. The default is “White”. • Background Color: This option consists of “Default”, “White”, “Black”, “Red”,            “Green”, “Blue”, “Yellow”, “Magenta” and “Cyan”. You can            change the background color of the caption. The default is            “Black”. • Foreground Opacity: This option consists of “Default”, “Transparent”,                “Translucent”, “Solid” and “Flashing”. You can change              the opacity of the letter. • Background Opacity: This option consists of “Default”, “Transparent”,                “Translucent”, “Solid”,and “Flashing”. You can change              the background opacity of the caption. • Return to Default: This option sets each of “Size”, “Font Style”, “Foreground          Color”, “Background Color”, “Foreground Opacity” and            “Background Opacity” to its default.
Viewing Closed Captions (On-Screen Text Messages) - Digital
CaptionCaption : OffCaption Mode  : Default   Caption Options     
TV
 Move   Enter Return
OffOn
CaptionCaption  : On   ►Caption Mode : Default   ►Caption Options       ►
TV
 Move   Enter Return
CaptionCaption  : OnCaption Mode : Default   Caption Options   
TV
 Move   Enter Return
CaptionCaption  : On   ►Caption Mode : Service1   ►Caption Options       ►
TV
 Move   Enter Return
Caption OptionsSize  : Default   ►Font Style : Default   ►Foreground Color : Default   ►Background Color : Default   ►Foreground Opacity : Default   ►Background Opacity : Default   ►Return to Default
TV
 Move    Enter Return
DefaultService1Service2ServiceService4ServiceService6CC1▼
  Press thePress the CC button on the remote control to turn the Caption “On” or “Off”.

BN68-01514A-X0Eng-0202_2.indd   492008-02-02   ¿ÀÈÄ 9:46:33 
						

							
English - 0
Adjusting the TV On/Off Melody Sound
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the ENTER  button.
2.	Press the ▲ or ▼ button to select "Melody", then press the ENTER  button.
3.	Press the ▲ or ▼ button to select “Off”, “Low”, “Medium” or “High”, then press    the ENTER  button.
• Off : Turns off the melody function. • Low : Sets the melody volume to low. • Medium : Sets the melody volume to medium. • High : Sets the melody volume to high.
   Press the ExIT button to exit.
The Melody does not play
 -  
When no sound is output from the TV because the MUTE button has been pressed.  -  
When no sound is output from the TV because the Volume has been reduced to minimum with the VOL- button. - When the TV is turned off by Timer function. 
➣
A melody sound can be set to come on when the TV is powered On or Off.SetupPlug & Play       ►Language : English   ►Time      ►V-Chip      ► Caption      ►Melody  : Medium   ► Energy Saving : Off   ►SW Upgrade       ►
TV
 Move    Enter Return
SetupPlug & Play       Language : English   Time      V-Chip       Caption      Melody  : Medium     Energy Saving : Off   SW Upgrade       
TV
 Move   Enter Return
OffLowMediumHigh
Using the Energy Saving Feature
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the"Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption.
1.		Press the MENU button to display the menu.      Press the ▲ or ▼ button to select "Setup", then press the ENTER  button.
2.		Press the ▲ or ▼ button to select "Energy Saving", then press the ENTER  button.
     Select the required option (“Off”, “Low”, “Medium”, “High”) by pressing the ▲ or ▼ button.     Press the ENTER  button.
• Off: Turns off the energy saving function.  • Low: Sets the TV to low energy saving mode. • Medium: Sets the TV to medium energy saving mode. • High: Sets the TV to high energy saving mode.
      Press the ExIT button to exit.
SetupPlug & Play       ►Language : English   ►Time      ►V-Chip      ► Caption      ►Melody  : Medium   ► Energy Saving : Off   ►SW Upgrade       ►
TV
 Move    Enter Return
 Move   Enter Return
SetupPlug & Play       Language : English   Time      V-Chip       Caption      Melody  : Medium   Energy Saving : Off   SW Upgrade       
OffLowMediumHigh Move   Enter Return
TV

BN68-01514A-X0Eng-0202_2.indd   502008-02-02   ¿ÀÈÄ 9:46:35 
						

							
English - 1
1. Insert a USB drive containing the firmware upgrade into the SERVICE port on   the rear of the TV.
2.  Press the MENU button to display the menu.   Press the ▲ or ▼ button to select “Setup”, then press the ENTER  button.							3. Press the ▲ or ▼ button to select “SW upgrade”, then press the ENTER  button.	
4.  
Press the ENTER  button. The message “Scanning for USB... It may take up to 30 seconds.” is displayed.
5.		The message “Upgrade version XXXX to version XXXX The system would be reset after upgrade.” is displayed. Press the ◄ or ► to select the “Yes”, then press the ENTER  button.  Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete. When software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
Upgrading the Software
Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG  (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
 
USB Software Upgrade
Scanning for USB...It may take up to 0 seconds
SetupPlug & Play       ►Language : English   ►Time      ►V-Chip      ► Caption      ►Melody  : Medium   ► Energy Saving : Off   ►SW Upgrade       ► Move    Enter Return
USB Software Upgrade
Upgrade version xxxx to version xxxxThe system would be reset after upgrade.
No
TV
Yes
TV Rear Panel
USB Drive

BN68-01514A-X0Eng-0202_2.indd   512008-02-02   ¿ÀÈÄ 9:46:36 
						

							
English - 2
Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center.
ProblemPossible Solution
Poor pictureTry another channel.Adjust the antenna.Check all wire connections.
Poor sound quality.Try another channel.Adjust the antenna.
No picture or sound.Try another channel.Press the SOURCE button.Make sure the TV is plugged in.Check the antenna connections.
No sound or sound is too low atmaximum volume.First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Picture rolls vertically.Check all wire connections.
The TV operates erratically.Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on.Make sure the wall outlet is working.
Remote control malfunctionsReplace the remote control batteries.Clean the upper edge of the remote control (transmission window).Check the battery terminals.
“Check signal cable” message.Ensure that the signal cable is firmly connected to the PC source.
“Not Supported Mode” message.Check the maximum resolution and connected device’s Video frequency.Compare these values with the data in the Display Modes.
Digital broadcasting screenproblem.Please check the digital signal strength and input antenna.
The image is too light or too dark.Adjust the Brightness and Contrast.Adjust the Fine tuning.
Black bars on the screen.Make sure the broadcast you’re receiving is High Definition (HD).HD channels sometimes broadcast Standard Definition (SD) programming, which can cause black bars.Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or  Pink tint.Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working.If you are using a Cable/Satellite box, you must set Closed Captioning on the box,  not your TV.
Snowy pictureYour cable box may need a firmware upgrade. Please contact your Cable company.
Ghosting on pictureThis is sometimes caused by compatibility issues with your cable box.Try connecting Component cables instead.
Appendix

BN68-01514A-X0Eng-0202_2.indd   522008-02-02   ¿ÀÈÄ 9:46:36 
						

							
English - 
ProblemPossible Solution
Horizontal bars appear to flicker,jitter or shimmer on the image.Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to flicker,jitter or shimmer on the image.Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and powerindicator light blinks steadily.On your computer check: Power, Signal Cable.The TV is using its power management system.Move the computer's mouse or press any key on the keyboard.
Image is not stable and may appear to vibrate when you have a computer connected to the PC input.
If the setting is not correct, use your computer utility program to change the display settings.Your TV supports multiscan display functions within the following frequency domain:
Horizontal frequency (kHz)30~60
Vertical frequency (Hz)60~75
PC Maximum refresh rate(at 60 Hz)1360 X 768
Image is not centered on the screen.Adjust the horizontal and vertical position.The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
The picture appears distorted in the corner of the screen.  If "Just Scan" is selected with some external devices, the picture may appear distorted in the corner of the screen. This symptom is caused by the external devices, not TV.
The “Resets all settings to the default values” message appears.This appears when you press and hold the ExIT button for a while. The productsettings are reset to the factory defaults.
This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

BN68-01514A-X0Eng-0202_2.indd   532008-02-02   ¿ÀÈÄ 9:46:37 
						

							
English - 4
Installing the Stand
	1.	Attach your LCD TV to the stand.
Two or more people should carry the TV.
Make sure to distinguish between the front and back of the stand when attaching it.
To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left of right sides of the TV.
2. Fasten two screws at position 1 and then fasten two screws at position 2.
Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one side.
➣
➣
➣
➣
Disconnecting the Stand
	1.	Remove four screws from the back of the TV.
2.	Separate the stand from the TV.
Two or more people should carry the TV.
3.	Cover the bottom hole with the cover.
➣
2
1

BN68-01514A-X0Eng-0202_2.indd   542008-02-02   ¿ÀÈÄ 9:46:38 
						

							
English - 
Auto Wall-Mount Adjustment (Sold separately) (LN2A0J1D, LN7A0J1D, LN40A0J1D)
Once the auto wall mount is installed, your TV’s position can be easily adjusted.
Entering the menu
1.   Press the ▲, ▼, ◄ or ► button on your remote control.  
The Wall Mount Adjustment screen is displayed.
   
If the Wall Mount Adjustment screen is not displayed when clicking on a direction button while watching your TV, use the menu to display that screen. 
 •  Press the MENU butt on to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER  button. 
  •  Press the ▲ or ▼ button to select “External Settings”, then press the ENTER  button.
  •  Press the ▲ or ▼ button to select “Wall-Mount Adjustment”, then press the ENTER  button.
TV Rear PanelAuto Wall-Mount
Ex-LINK Cable (Not supplied)
For installation, refer to the Installation Manual provided with the wall mount. 
For product installation and the installation and moving of the wall mount, make sure to consult a specialized installation company. 
This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer. LN37A330J1D and LN40A330J1D models are not compatible with the older wall mount model (WMN5090A).
Remembering the Position
2.   Adjust to the desired position using the ▲,▼,◄,► buttons.
  
If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears.
  
Press the INFO button to reset. Press the ◄ or ► button to select “Yes”, then press the ENTER  button.  The position is initialized to the default setting.
.   Press the blue button. Press the ▲ and ▼ buttons to select a save mode from either Position 1,  Position 2 or Position 3 in order to save the current position.
  
To not save the current position, press the RETURN button. 
  
When selecting a save mode, you cannot use the Color buttons.
4.   Press the ENTER  button to save.
  
When Position1 is selected, the message "Current position saved as Position1" is displayed.
.   Press the ENTER  button.
  
The saved Position appears on the left side of the OSD.
Moving to the remembered position
1.   Complete Step 1 of “Entering the menu”.
2.    Pressing a Color (Red, Green, Yellow) button moves the auto wall mount to the saved position.
  
You can move the wall mount to one of the 3 pre-set positions by pressing the Red (Position 1), Green (Position 2) or Yellow (Position 3) buttons.
  
If you adjust the position after moving to a pre-set position, the position display will disappear.
Save
Select a mode to Save.
Position1
Position2
Position
 Adjust    Enter Return
Wall-Mount Adjusment
Adjust   Save  CenterINFOPosition  1   2    
External SettingsMelody  : Medium   ► Wall-Mount Adjustment   
TV
 Move   Enter Return
Wall-Mount Adjusment
Adjust   Save  CenterINFO
Position1
Position  1   2    

BN68-01514A-X0Eng-0202_2.indd   552008-02-02   ¿ÀÈÄ 9:46:41                                     
						

							
English - 6
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor.When attaching to other building materials, please contact your nearest \
dealer.If installed on a ceiling or slanted wall, it may fall and result in sev\
ere personal injury.
Product FamilyinchesVESA Spec. (A * B)Standard ScrewQuantity
LCD-TV
23~ 26200 * 100M4
4
32 ~ 40200 * 200M6
46 ~ 52600 * 400
M857 700 * 400 (No VESA)
57 ~ 70800 * 400
80 ~1400 * 800
PDP-TV
42 ~ 50600 * 400
M8
455 ~ 70800 * 400
63No VESA6
80 ~1400 * 8004
  
Standard dimensions for wall mount kits are shown in the table above. 
  
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
  
Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
  
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications.
  Do not use screws that do not comply with the VESA standard screw specifications. Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.Samsung is not liable for these kinds of accidents.
  
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
 Do not exceed 15 degrees tilt when mounting this TV.
Do not install your Wall Mount Kit while your TV is turned on.  It may result in personal injury due to electric shock.

BN68-01514A-X0Eng-0202_2.indd   562008-02-02   ¿ÀÈÄ 9:46:42 
						

							
English - 7
1.	Insert the locking device into the Kensington slot on the LCD TV (Figure 1) and turn it in the locking direction (Figure 2).
2.	Connect the Kensington Lock cable.
3.	Fix the Kensington Lock to a desk or a heavy stationary object.
Using the Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public place. The locking device  has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use. The locking device has to be purchased separately.
Figure 2
Figure 1
Cable

The location of the  Kensington Lock may be different depending on its model.

BN68-01514A-X0Eng-0202_2.indd   572008-02-02   ¿ÀÈÄ 9:46:43 
						

							
English - 8
Specifications
Model NameLN26A0J1DLN2A0J1D
Screen Size (Diagonal)26 inches32 inches
PC Resolution1360 x 768 @ 60 Hz1360 x 768 @ 60 Hz
Sound Output 5W x 2 10W x 2
Dimensions (WxDxH) Body
With stand
  29.3 X 3.1 X 17.6 inches(743.8 X 79.8 X 447.4 mm)29.3 X 9.1 X 19.9 inches(743.8 X 232 X 506.5mm)
34.4 X 3.2 X 20.9 inches(874 X 81 X 531 mm)34.4 X 11.5 X 22.7 inches(874 X 291 X 577 mm)
Weight Without stand 10.5 kg (23.1 lbs) 15 kg (33.1 lbs)
Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
Stand Swivel (Left / Right)-0˚ ~ 0˚-20˚ ~ 20˚
Model NameLN7A0J1DLN40A0J1D
Screen Size (Diagonal)37 inches40 inches
PC Resolution1360 x 768 @ 60 Hz1360 x 768 @ 60 Hz
Sound Output 10W x 2 10W x 2
Dimensions (WxDxH) Body
With stand
39.9 X 3.7 X 23.7 inches(1013 X 93 X 602.3 mm)39.9 X 11.8 25.7 inches(1013 X 300 X 652 mm))
42.7 X 3.7 X 25.2 inches(1084 X 95 X 639 mm)42.7 X 11.8 X 27.2 inches(1084 X 300 X 690 mm)
Weight Without stand 20.5 kg (45.2 lbs) 21.5 kg (47.4 lbs)
Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
  50 °F to 104 °F (10 °C to 40 °C) 10% to 80%, non-condensing -4 °F to 113 °F (-20 °C to 45 °C) 5% to 95%, non-condensing
Stand Swivel (Left / Right)-20˚ ~ 20˚-20˚ ~ 20˚
Design and specifications are subject to change without prior notice.
This device is a Class B digital apparatus.
For the power supply and Power Consumption, refer to the label attached to the product.

BN68-01514A-X0Eng-0202_2.indd   582008-02-02   ¿ÀÈÄ 9:46:43