Samsung LCD TV LN26A330J1D Specifications

							
English - 
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV.
1.		Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB, PR]  jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
2.		Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the DVD Player or Cable Box/Satellite receiver (Set-Top Box).
 Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and   Pr (Red) for enhanced video quality.  Be sure to match the component video and audio connections.   For example, if connecting a Component video cable to COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also. Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel configuration. When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color of the connection terminal to the cable.
DVD Player or Cable Box / Satellite receiver (Set-Top Box)
TV Rear Panel
Component Cable (Not supplied)1
Audio Cable (Not supplied)2
Connecting a Camcorder 
They allow you to view the camcorder tapes without using a VCR.
1.	 	Connect a Video Cable between the AV IN 1 [Y/VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
2.		Connect Audio Cables between the AV IN 1  [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.
Each Camcorder has a different back panel configuration. When connecting a Camcorder, match the color of the connection terminal to the cable. When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
Camcorder
Video Cable (Not supplied)1
Audio Cable (Not supplied)2
TV Rear Panel

BN68-01514A-X0Eng-0202_2.indd   92008-02-02   ¿ÀÈÄ 9:45:22 
						

							
English - 10
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 6~7). Skip step 1 if you have not yet connected to an antenna or a cable s\
ystem. 
1.		Unplug the cable or antenna from the back of the TV.
2.		Connect the cable or antenna to the ANT IN terminal on the back of the VCR.
3.		Connect an RF Cable between   the ANT OUT terminal on the  VCR and the ANT IN terminal on the TV.
4.		Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [Y/VIDEO] jack on the TV.
5.		Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [R-AUDIO-L] jacks on the TV.
   If you have a “mono”  (non-stereo) VCR, use a  Y-connector (not supplied) to hook up to the right and left audio input jacks of the TV. If your VCRis stereo, you mustm connect two cables.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.  Each VCR has a different back panel configuration.  When connecting a VCR, match the color of the connection terminal to the cable.  When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).
Video Connection
ANT IN
VCR Rear Panel
Video Cable (Not supplied)4
Audio Cable (Not supplied)
RF Cable (Not supplied)
TV Rear Panel

BN68-01514A-X0Eng-0202_2.indd   102008-02-02   ¿ÀÈÄ 9:45:23 
						

							
English - 11
Connecting an Amplifier/DVD Home Theater
1.		Connect Audio Cables between the AUDIO OUT  [R-AUDIO-L] jacks on the TV and AUDIO IN [R-AUDIO-L] jacks on the Amplifier/DVD Home Theater.
     When an audio amplifier is connected to the "AUDIO OUT [R-AUDIO-L]" jacks: Decrease the volume of the TV and adjust the volume level with the Amplifier’s volume control.
Amplifier/DVD Home Theater
TV Rear Panel
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel configuration. When connecting an Amplifier/DVD Home Theater, match the color of the connection   terminal to the cable.
Connecting a Digital Audio System
1.	 	Connect an Optical Cable between the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
     When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Decrease the volume of the TV and adjust the volume level with the system’s volume control.
Digital Audio SystemTV Rear Panel
Optical Cable (Not supplied)
 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
 Each Digital Audio System has a different back panel configuration.
  
When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 chan-nel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an Amplifier or Home Theater, not the TV.
The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.

BN68-01514A-X0Eng-0202_2.indd   112008-02-02   ¿ÀÈÄ 9:45:25 
						

							
English - 12
Connecting a PC
Using the D-Sub Cable
1.		Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer. 
2.		Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer.
Using the HDMI/DVI Cable
1.		Connect a HDMI/DVI cable between the HDMI IN 2 jack on the TV and the PC output jack on your computer. 
2.		Connect a 3.5 mm Stereo mini-plug/2RCA Cable between the DVI IN(HDMI2) [R-AUDIO-L] jack on the TV and the Audio Out jack of the sound card on your computer.
PC
TV Rear Panel
D-Sub Cable (Not supplied)1
PC Audio Cable (Not supplied)2
Each PC has a different back panel configuration. When connecting a PC, match the color of the connection terminal to the cable.  When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
. mm Stereo mini-plug/2RCA Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
TV Rear Panel
PC

BN68-01514A-X0Eng-0202_2.indd   122008-02-02   ¿ÀÈÄ 9:45:27 
						

							
English - 1
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently. 
The Screen Saver is activated if there is no remote control key input for longer than 1 minute while “Plug & Play” is running. 
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
1.	Press the POWER button on the remote control.      The message “Menu Language, Store Demo, Channels and Time will be set.” is displayed.
   Press the ENTER  button, then “Select the language of the OSD” menu     is automatically displayed.
2. Press the ▲ or ▼ button to select language, then press the ENTER  button.       The message “Select ‘Home Use’ when installing this TV in your home.” is displayed.
3.	Press the ◄ or ► button to select “Store Demo” or “Home Use”, then     press the ENTER  button.     The message “Select the antennas to memorize.” is displayed.
     We recommend setting the TV to “Home Use” mode for the best picture in your   home environment.    “Store Demo” mode is only intended for use in retail environments.     
   If the unit is accidentally set to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the Volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4.	Press the ▲ or ▼ button to memorize the channels of the selected connection.     Press the ENTER  button to select “Start”.     Air: “Air” antenna signal.  Cable: “Cable” antenna signal.  Auto: “Air” and “Cable” antenna signals.
    In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the ENTER  button. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
5.	The TV will begin memorizing all of the available channels.
    To stop the search before it has finished, press the ENTER  button with “Stop” selected.
    After all the available channels are stored, it starts to remove scrambled channels (see page 28). The Auto program menu then reappears.  Press the ENTER  button when channel memorization is complete. The message “Set the Clock Mode.” is displayed. 
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Operation
Language  : 
Plug & Play
English
Español
Français
 Move  Enter
Select the language of the OSD.
Select ‘Home Use’ when installing this TV in your home.
Plug & Play
Store DemoHome Use
 Move  Enter
Select the antennas to memorize.
StartAir
Plug & Play
CableAutoStartStart
 Move  Enter Skip
Plug & Play
Enter
Menu Language, Store Demo,  Channels and Time will be set.
Start
Plug & Play
0   %
   Enter Skip
Auto Program in Progress.DTV Air : 02  Air : 11DTV Cable : 2 Cable : 21Cable   0
Auto Program
Stop
Plug & Play
77   %
   Enter Skip
Removing scrambled channel.
DTV Cable   41
Auto Program
Stop
Selects a cable signal type for your location.Plug & Play
Move  Enter Skip
analogStartSTDHRCIRCdigitalSTDHRCIRC

BN68-01514A-X0Eng-0202_2.indd   132008-02-02   ¿ÀÈÄ 9:45:30 
						

							
English - 14
6.	Press the ENTER  button.    Press the ▲ or ▼ button to select “Auto”, then Press the ENTER  button.    The message “Set to daylight saving time.” is displayed.
     If you select “Manual”, “Enter the current date and time.” is displayed.  (See page 37)
7.	Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER  button.    The message “Select the time zone in which you live.” is displayed.
8.	Press the ▲ or ▼ button to highlight the time zone for your local area.      Press the ENTER  button. If you have received a digital signal, the time will be set automatically. If not, see page 37 to set the clock.
9.	The message “Enjoy your watching.” is displayed.    When you have finished, press the ENTER  button.
If you want to reset this feature...
1.	 Press the MENU button to display the menu.      Press the ▲ or ▼ button to select "Setup", then press the ENTER  button.
2.			Press the ENTER  button again to select “Plug & Play”. For further details on setting up options, refer to the pages 13~14.
   The “Plug & Play” feature is only available in the TV mode.
Changing Channels
Using the Channel Buttons
1.	Press the CH or CH button to change channels. 
     When you press the CH or CH button, the TV changes channels in   sequence.  You will see all the channels that the TV has memorized (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 16 to memorize channels.
Using the Number Buttons
1.		Press the number buttons to go directly to a channel. For example, to select channel 27, press 2, then 7.
     For quick channel change, press the number buttons, then press the ENTER  button.
DST       :
Set to daylight saving time.Plug & Play
OffOn
 Move   Enter Skip
SetupPlug & Play       ►Language : English   ►Time      ►V-Chip      ► Caption      ►Melody  : Medium   ► Energy Saving : Off   ►SW Upgrade       ►
TV
 Move    Enter Return
Plug & Play
     Enter
Enjoy your watching.
OK
Select the time zone in which you live.Plug & Play
NewfoundlandAtlanticEasternCentralMountainPacificAlaskaHawaii
 Move   Enter Skip
Clock Mode :
 Move  Enter Skip
Set the Clock Mode.
Plug & Play
AutoManual
Plug & Play
Auto Program is completed.7 Channels are memorized.DTV Air : 24  Air : 1DTV Cable : 17 Cable : 
   Enter  Skip
OK
Auto Program

BN68-01514A-X0Eng-0202_2.indd   142008-02-02   ¿ÀÈÄ 9:45:32 
						

							
English - 1
Adjusting the Volume
Using the Volume Buttons
1.	Press the VOL or VOL button to increase or decrease the volume.
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.	Press MUTE button and the sound cuts off.     "" is displayed on the screen.
2.	To turn mute off, press the MUTE button again or simply press the     VOL or VOL button.
Viewing the Display
1.	Press the INFO button on the remote control.
    The TV will display the channel, the type of sound,     and the status of certain picture and sound settings.
Press the INFO button once more or wait approximately 10 seconds and the display disappears automatically.➣
The display identifies the current channel and the status of certain audio-video se ttings.  
Air 7
MonoPicture Mode  : StandardSound Mode  : CustomMTS  : StereoV-Chip  : OffCaption  : Off   : 4 pm
Using the      Button
The  button is used to select stations that broadcast a digital signal.
1.		For example, for Channel 7-1, press 7, then , then 1.
     HD indicates the TV is receiving a Digital High Definition signal. SD indicates the TV is receiving a Standard Definition signal.     For quick channel change, press the number buttons, then press the ENTER  button.
Using the PRE CH Button to select the Previous Channel
1.	Press the PRE CH button.     The TV will switch to the last channel viewed.
   To quickly switch between two channels that are far apart, tune to one        channel, then use the number button to select the second channel. Then        use the PRE CH button to quickly alternate between them.
Viewing the Menus
1.	With the power on, press the MENU button.    The main menu appears on the screen. The menu’s left side has icons:    Picture, Sound, Channel, Setup, Input.
2.	Press the ▲ or ▼ button to select one of the icons.    Then press the ENTER  button to access the icon’s sub-menu.
3.	Press the ExIT button to exit.
The on-screen menus disappear from the screen after about one minute. 
Move    Enter Exit
Mode  : Standard    ►Backlight       7Contrast       Brightness     4Sharpness     0Color     0Tint  G 0       R 0▼ More 
PictureTV

BN68-01514A-X0Eng-0202_2.indd   152008-02-02   ¿ÀÈÄ 9:45:33 
						

							
English - 16
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding or deleting channels (Channel Lists)\
.
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you \
must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1.	Press the MENU button to display the menu.     Press the ▲ or ▼ button to select "Channel", then press the ENTER  button.
2.	Press the ENTER  button to select “Antenna”.    Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER  button.
   Press the ExIT button to exit.
Easy Setting
1.  Press the TOOLS button on the remote control.
2.    Press the ▲ or ▼ button to select “Switch to Air” (or “Switch to Cable”), then press, then press the ENTER  button.
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►
Channel
Move   Enter Return
TV
Channel
Move   Enter Return
TVAntenna : Air  Auto Program     Clear Scrambled ChannelChannel List     Name     Fine Tune     Signal Strength     
AirCable
Using the TOOLS Button
You can use the Tools button to select your frequently used functions quickly and easily. The “Tools” menu changes depending on which external input mode you are vie\
wing.
1.		Press the TOOLS button. The “Tools” menu will appear.
2.	Press the ▲ or ▼ button to select a menu.
3.		Press the ▲/▼/◄/►/ENTER  buttons to display, change, or use the selected items.For a more detailed description of each function, refer to the corresponding page.
• Picture Mode, see page 19• Sound Mode, see page 24• Sleep Timer, see page 39• Add to Favorite, see page 30• Switch to Air, see page 16• Auto Adjustment, see page  3535
Tools
Picture Mode ◄   Standard   ►Sound Mode :  CustomSleep Timer  :  OffAdd to FavoriteSwitch to Air
  Move  Adjust    Exit
Tools
Picture Mode  : StandardSound Mode  : CustomSleep Timer    OffAdd to FavoriteSwitch to Air
 Move   Enter Exit

BN68-01514A-X0Eng-0202_2.indd   162008-02-02   ¿ÀÈÄ 9:45:34 
						

							
English - 17
Storing Channels in Memory (Automatic Method)
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select “Channel”, then press the ENTER  button. 
2.	Press the ▲ or ▼ button to select "Auto Program", then press the ENTER  button.
3.		Press the ▲ or ▼ button to select the antenna connection, then press the  ENTER  button.
    Air: “Air” antenna signal.  Cable: “Cable” antenna signal.  Auto: “Air” and “Cable” antenna signals.
4.		When selecting the Cable TV system: Press the ENTER  button to start the auto program.
    
Press the ◄ or ► button, then press the ▲ or ▼ to select the correct analog signal cable system source among “STD”, “HRC”, and “IRC”. Press the ENTER  button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.
    STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
5.		The TV begins memorizing all available stations. After all the available channels are stored, it start to remove scrambled channels(see page 28).
    If you want to stop Auto Programming, press the ENTER  button. The “Stop Auto Program?” message will be displayed. Select “Yes” by pressing the ◄ or ► button, then press the ENTER  button.
   Press the ExIT button to exit.
Move    Enter Return
Selects the antenna to execute the Auto Program function.
Auto Program
Move   Enter Return
TV
StartAirCableAutoStartStart
Move   Enter Return
Selects a cable signal type for your location.Auto Program
Move   Enter Return
TV
analogStartSTDHRCIRCdigital
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►Fine Tune     ►Signal Strength     ►
Channel
Move   Enter Return
TV
Auto ProgramPlug & Play
   Enter Return
Auto Program
STDHRCIRC
Auto Program in Progress.DTV Cable : --    Cable : 11
Cable   011    % Stop
Auto Program
   Enter Return
Auto Program is completed. Channels are memorized.
DTV Cable : 6, Cable : 4
OK
Auto Program
 Move  Enter Return
Stop Auto Program?DTV Cable : --    Cable : 11
Yes
11    % 
No
Plug & Play
11   %
                Enter Return
Removing scrambled channel.
DTV Cable 40
Auto Program
Stop

BN68-01514A-X0Eng-0202_2.indd   172008-02-02   ¿ÀÈÄ 9:45:36 
						

							
English - 18
To Select the Source
Use to select TV or other external input sources such as DVD players or Cable Box/ Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source  of your choice.
1.	Press the MENU button to display the menu.    Press  the▲ or ▼ button to select “Input”, then press the ENTER  button.
2. Press the ENTER  button to select "Source List".    Press the ▲ or ▼ button to select signal source, then press the ENTER  button.
    Available signal sources: TV, AV, Component1, Component2, PC, HDMI1, HDMI2.   You can choose only those external devices that are connected to the TV.
 Press the SOURCE button on the remote control to view an external signal source.
To Edit the Input Source Name
Name the device connected to the input jacks to make your input source s\
election easier.
1.	Press the MENU button to display the menu.    Press  the▲ or ▼ button to select “Input”, then press the ENTER  button.    Press the ▲ or ▼ button to select "Edit Name", then press the ENTER  button.
2.   Press the ▲ or ▼ button to select "AV", "Component1", "Component2", "PC", "HDMI1", "HDMI2" input jack, then press the ENTER  button.
3.  Press the ▲ or ▼ button to select “VCR”, “DVD”, “Cable STB”, “Satellite STB”, “PVR STB”, “AV Receiver”, “Game”, “Camcorder”, “PC”, “TV”, “IPTV”, “Blu-Ray”, “HD DVD”, “Digital Media Adapter” input source, then press the ENTER  button. Press the ExIT button to exit.
InputSource List  : TV   ►Edit Name       ►
TV
Move   Enter Return
Source ListTV
Move   Enter Return
TVAV : ----Component1 : ----Component2 : ----PC : ----HDMI1 : ----HDMI2 : ----
InputSource List  : TV   ►Edit Name       ►
TV
Move   Enter Return
Edit NameTV
 Move   Enter Return
AV  :   ----  ►Component1  :   ---- ►Component2  :   ---- ►PC :   ---- ►HDMI1 :   ---- ►HDMI2 :   ---- ►         
Edit NameTV
Move   Enter Return
AV : ---- Component1  :   ---- ►Component2  :   ---- ►PC :   ---- ►HDMI1 :   ---- ►HDMI2 :   ---- ►         
----VCRDVDCable STBSatellite STBPVR STBAV ReceiverGame▼

BN68-01514A-X0Eng-0202_2.indd   182008-02-02   ¿ÀÈÄ 9:45:39