Samsung LCD TV LN26A330J1D Specifications

							
English - 2
Adding and Erasing Channels
Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. To use the Channel List function, first run “Auto Program” (see page 17).
All     ►Added      ►Favorite      ► 
Channel List
Move   Enter Return
TV
Channel List / All
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
WatchAddDeleteFavorite
Channel List / All
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
Channel List / All
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
Channel List / All
DTV Air 2-1Air Air4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
WatchAddDeleteFavorite
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER  button. 
2.	Press the ▲ or ▼ button to select "Channel List", then press the     ENTER  button.
3.	Press the ENTER  button to select “All”.
4.	Press the  ◄, ►, ▲ or ▼ button to select a channel to delete, then press the     ENTER  button.
     Press the ▲ or ▼ button to select “Delete”, then press the ENTER  button  to delete the channel.
   The   mark will disappear.
 
5.	Press the ◄, ►, ▲ or ▼ button to select a channel to add, then press the     ENTER  button.
   Press the ▲ or ▼ button to select “Add”, then press the ENTER  button to    add the channel.
   The  mark will appear and the channel will be added.
   Press the ExIT button to exit.
   All selected channels will be shown on “Added" menu.
• Red button: Press repeatedly to select “All”, “Added” or “Favorite”. • Green button: Press to add all deleted channels. • Yellow button: Press to delete all memorized channels.
Antenna  : Cable  ►Auto Program   ►Clear Scrambled Channel ►Channel List   ►Name  ►Fine Tune   ►Signal Strength   ►
Channel
Move   Enter Return
TV
List ModeDelete AllAdd All
List ModeDelete AllAdd All
List ModeDelete AllAdd All
List ModeDelete AllAdd All
Move   Enter   Return
Move   Enter Page Return
Move   Enter   Return
Move   Enter Page Return

BN68-01514A-X0Eng-0202_2.indd   292008-02-02   ¿ÀÈÄ 9:45:57 
						

							
English - 0
To Set-Up Your Favorite Channels
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER  button. 
2.		Press the ▲ or ▼ button to select "Channel List", then press the ENTER  button.
3.	Press the ▲ or ▼ button to select "All" or "Added", then press the ENTER  button.
4.		Press the  ◄, ►, ▲ or ▼ button to select your favorite channels to watch among the labeled channels. Then press the ENTER  button.
     Press the ▲ or ▼ button to select “Favorite”, then press the ENTER   button.
   The "  " symbol will be highlighted and the channel will be set as a Favorite.      To cancel your Favorite channel selection, press the ENTER  button until the "  " symbol is no longer highlighted.
   Press the ExIT button to exit.
   Only memorized channels can be set as favorite channels.    All favorite channels will be shown in the “Favorite” menu.
     To select the favorite channels you have set up, press the FAV.CH button  on the remote control.
You can set channels you watch frequently as favorites.
All      ►Added      ►Favorite      ► 
Channel List
Move   Enter Return
TV
Channel List / Added
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
Channel List / Added
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
WatchAddDeleteFavorite
Antenna  : Cable  ►Auto Program   ►Clear Scrambled Channel ►Channel List   ►Name  ►Fine Tune   ►Signal Strength   ►
Channel
Move   Enter Return
TV
List ModeDelete All
List ModeDelete All
Easy Setting
1. Press the TOOLS button on the remote control.
2.  
Press the ▲ or ▼ button to select “Add to Favorite” (or “Delete from Favorite”), then press the ENTER  button. The current channel is added to (or deleted from) Favorites.
Tools
Picture Mode  :  StandardSound Mode  :  CustomSleep Timer  :  OffAdd to FavoriteSwitch to Air
 Move    Enter Exit
Move   Enter   Return
Move   Enter Page Return

BN68-01514A-X0Eng-0202_2.indd   302008-02-02   ¿ÀÈÄ 9:45:59 
						

							
English - 1
Viewing the Channel Lists
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER  button. 
2.	Press the ▲ or ▼ button to select "Channel List", then press the     ENTER  button.
3.	Press the ▲ or ▼ button to select “All”, “Added” or “Favorite”, then press the    ENTER  button.
4.	Press the ▲ or ▼ button to select “Channel”, then press the ENTER  button.    To toggle between your all channels, add channels or favorite channels,     use the Red button on the remote control.
• Red button: Press repeatedly to select “All”, “Added” or “Favorite”
You can display a list of all channels, added channels or your favorite c\
hannels.
All      ►Added      ►Favorite      ► 
Channel List
Move   Enter Return
TV
Channel List / All
DTV Air 2-1AirAir4Air Air 6Air 7DTV Air 7-1Air 8
Air Air 10DTV Air 10-1DTV Air 10-2DTV Air 10-DTV Air 10-1DTV Air 10-2DTV Air 10-
DTV Air 10-1DTV Air 10-2DTV Air 10-Air 12DTV Air 1-1DTV Air 1-2DTV Air 1-DTV Air 1-4
Air 1 / 2
Antenna  : Cable  ►Auto Program   ►Clear Scrambled Channel ►Channel List   ►Name  ►Fine Tune   ►Signal Strength   ►
Channel
Move   Enter Return
TV
List ModeDelete AllAdd AllMove   Enter Page Return

BN68-01514A-X0Eng-0202_2.indd   312008-02-02   ¿ÀÈÄ 9:46:01 
						

							
English - 2
Labeling Channels
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select “Channel”, then press the ENTER  button.    Press the ▲ or ▼ button to select “Name”, then press the ENTER  button.
2.	Press the ▲ or ▼ button to select the channel to be assigned a new name,    then press the ENTER  button.    Press the ▲ or ▼ button to select a letter, a number or a blank (Results in this      sequence: A...Z, 0...9, +, -, *, /, blank).    Press the ► button to switch to the next field, which will be selected.    Select a second letter or digit by pressing the ▲ or ▼ button, as above.    Repeat the process to select the last three digits. When you have finished,    press the ENTER  button to assign the new name.    To erase the assigned new name, select "Clear" by pressing the ◄ or ► button,    then press the ENTER  button.
   Press the ExIT button to exit.
The names of digital broadcasting channels are automatically assigned and cannot be labelled.➣
Name
Move    Enter Return
TV
Name
Move   Adjust Return
TV
Channels can be  labeled so that their call letters appear whenever the channel is selected.labeled so that their call letters appear whenever the channel is selected.o that their call letters appear whenever the channel is selected.
Antenna  : Air  ►Auto Program   ►Clear Scrambled Channel ►Channel List   ►Name  ►Fine Tune   ►Signal Strength   ►
Channel
Move   Enter Return
TV
Air  2Air   Air  4Air   Air  6
ClearClearClearClearClear
Air  2Air   Air  4Air   Air  6
ClearClearClearClearClear
A

BN68-01514A-X0Eng-0202_2.indd   322008-02-02   ¿ÀÈÄ 9:46:02 
						

							
English - 
Fine Tuning Analog Channels
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Channel", then press the ENTER  button. 
2.	Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER  button.
3.	Press the ◄ or ► button to adjust the fine tuning.    To store the fine tuning setting in the TV’s memory, press the ENTER  button.
    If you do not store the fine-tuned channel in memory, adjustments are not saved.
4.	To reset the fine tuning setting, press the ▼ button to select "Reset",     then press  the ENTER  button.
   Press the ExIT button to exit.     "*" will appear next to the name of fine-tuned channels.
    Only analog TV channels can be fine tuned.
Use fine tuning to manually adjust a particular channel for optimal reception.
Checking the Digital-Signal Strength
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select “Channel”, then press the ENTER  button. 
2.	Press the ▲ or ▼ button to select “Signal Strength”, then press the ENTER      button.    If the signal strength meter indicates that the signal is weak, physically adjust your      antenna to increase the signal strength.    Continue to adjust the antenna until you find the best position with the strongest      signal.
   Press the ExIT button to exit.
Unlike analog channels, which can vary in reception quality from “sno\
wy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, y ou cannot fine tune a digital channel. You can, however, adjust your antenna to improve the reception of available digital chan\
nels.
Signal Strength
    Enter Return
TV
OK
 Adjust  Save Return
Fine TuneAir 24
0
Reset
 Move  Enter Return
Fine TuneAir 24
0
Reset
Antenna  : Air  ►Auto Program   ►Clear Scrambled Channel ►Channel List   ►Name  ►Fine Tune   ►Signal Strength   ►
Channel
Move   Enter Return
TV
Antenna  : Cable  ►Auto Program   ►Clear Scrambled Channel ►Channel List   ►Name  ►Fine Tune   ►Signal Strength   ►
Channel
Move   Enter Return
TV
 Adjust  Save Return
Fine TuneAir 24 *
+
Reset
Fine Tuned

BN68-01514A-X0Eng-0202_2.indd   332008-02-02   ¿ÀÈÄ 9:46:04 
						

							
English - 4
Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows xP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,  depending upon your particular version of Windows and your particular vi\
deo card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases\
. (If not, contact your computer manufacturer or Samsung Dealer.)
1.	First, click on "Control Panel" on the Windows start menu.
2.	When the control panel window appears, click on "Appearance and Themes" and a       display dialog-box will appear.
3.	When the control panel window appears, click on "Display" and a display dialog-box        will appear.
4.	Navigate to the "Settings" tab on the display dialog-box.    The correct size setting (resolution)
   Optimum: 1360 X 768 pixels
   If a vertical-frequency option exists on your display settings dialog box,     the correct value is "60" or "60 Hz". Otherwise, just click "OK" and exit the dialog box.
PC Display
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically.  If the signal from the system doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no video. For the display modes listed below, the screen image has been optimized during manufacturing.
ModeResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)Pixel Clock Frequency (MHz)Sync Polarity (H/V)
IBM640x350 720×40031.469 31.469 70.086 70.087 25.175   28.322+/- -/+
VESA
640×480 640×480 640×480 800×600 800×600 800×600  1024×768 1024×768 1024×768 1360 x 768
31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 47.712
59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 60.015
25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 85.500
-/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+
ModeResolutionHorizontal Frequency (kHz)Vertical Frequency (Hz)Pixel Clock Frequency (MHz)Sync Polarity (H/V)
VESA
640×480 800×600 1024×768 1360 x 768
31.469 37.879 48.363 47.712
59.940 60.317 60.004 60.015
25.175 40.000 65.000 85.500
-/- +/+ -/- +/+
D-Sub Input
HDMI/DVI Input

BN68-01514A-X0Eng-0202_2.indd   342008-02-02   ¿ÀÈÄ 9:46:05 
						

							
English - 
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives.  The function also automatically fine-tunes the settings and adjusts the frequency values and positions.  
 This function does not work in DVI-Digital mode. Preset: Press the SOURCE button to select PC mode.
1.		Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Picture”, then press the ENTER  button.
2.	Press the ▲ or ▼ button to select "Auto Adjustment", then press the ENTER  button.
   Press the ExIT button to exit.
Setting up the TV with your PC
Move    Enter Return
Mode  : Standard    ►Backlight       7Contrast       Brightness     4Sharpness     0Auto AdjustmentScreen             ►▼ More 
PictureTV
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,  re-adjust the picture so that it is aligned on the center of the screen.
 Preset: Press the SOURCE button to select PC mode.
1.	Press the MENU button to display the menu.     Press the ▲ or ▼ button to select "Picture", then press the ENTER  button.    Press the ▲ or ▼ button to select "Screen", then press the ENTER  button.
2.	Press the ENTER  button to select "Image Lock".
3.	Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the ENTER  button.    Press the ◄ or ► button to adjust the screen quality.     Vertical stripes may appear or the picture may be blurry.        Press the ENTER  button.
   Press the ExIT button to exit.
0▲Coarse▼Move Adjust Return
Move    Enter Return
Image Lock       ►Position     ►Image Reset          Resolution  : 160 x 768 @60Hz 
ScreenPC
Move   Enter Return
Coarse     0Fine     4    
Image LockPC
Move   Enter Return
Mode  : Standard    ►Backlight       7Contrast       Brightness     4Sharpness     0Auto AdjustmentScreen             ►▼ More 
PictureTV
Auto Adjustment in progress.Please wait.
Easy Setting
1.  Press the TOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Sound Mode”.
3. Press the ◄ or ►button to select the required option.
4. Press the ExIT or TOOLS button to exit.
Tools
Picture Mode  :    StandardSound Mode  :    CustomSleep Timer  :  OffAuto Adjustment
  Move    Enter   Exit

BN68-01514A-X0Eng-0202_2.indd   352008-02-02   ¿ÀÈÄ 9:46:06 
						

							
English - 6
Changing the Screen Position
Adjust the PC’s screen positioning if it does not fit the TV screen.
 Preset: Press the SOURCE button to select PC mode.
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Picture", then press the ENTER  button.    Press the ▲ or ▼ button to select "Screen", then press the ENTER  button.
2.	Press the ▲ or ▼ button to select "Position", then press the ENTER  button.
3.	Press the ▲ or ▼ button to adjust the V-Position.    Press the ◄ or ► button to adjust the H-Position.    Press the ENTER  button.
   Press the ExIT button to exit.
Initializing the Screen Position, Coarse and Fine
You can replace all image settings with the factory default values.
 Preset: Press the SOURCE button to select PC mode.
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Picture", then press the ENTER  button.    Press the ▲ or ▼ button to select "Screen", then press the ENTER  button.
2.		Press the ▲ or ▼ button to select "Image Reset", then press the ENTER   button.
   Press the ExIT button to exit.
Move    Enter Return
Image Lock       ►Position     ►Image Reset          Resolution  : 160 x 768 @60Hz 
ScreenPC
Move   Enter Return
Image Lock       ►Position     ►Image Reset          Resolution  : 160 x 768 @60Hz 
ScreenPC
Image Reset is completed.
TV
 Move   Enter Return
Position
Viewing the Resolution
You can confirm the resolution configured for the PC.
Move    Enter Return
Image Lock       ►Position     ►Image Reset          Resolution  : 160 x 768 @60Hz 
ScreenPC

BN68-01514A-X0Eng-0202_2.indd   362008-02-02   ¿ÀÈÄ 9:46:08 
						

							
English - 7
Setting the Clock
Setting the clock is necessary in order to use the various timer feature\
s of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.)
Option 1: Setting the Clock Manually
1.	Press the MENU button to display the menu.    Press the ▲ or ▼ button to select "Setup", then press the ENTER  button.    Press the ▲ or ▼ button to select "Time", then press the ENTER  button.
2.	Press the ENTER  button to select "Clock".
3.	Press the ENTER  button to select “Clock Mode”.    Press the ▲ or ▼ button to select “Manual”, then press the ENTER  button.
4.		Press the ▲ or ▼ button to select “Clock Set”, then press the ENTER   button.
5.	Press the ◄ or ► button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”,    or “am/pm”. Set the date and time you want by pressing the ▲ or ▼ button,    then press the ENTER  button.
   Press the ExIT button to exit.
    The current time will appear every time you press the INFO button.
    You can set the month, day, year, hour and minute directly by pressing the       number buttons on the remote control.
Time Setting
Time
Clock      ►Sleep Timer  : Off   ► Timer 1 : Inactivated   ►Timer 2 : Inactivated   ►Timer  : Inactivated   ► 
TV
 Move   Enter Return
- - / - - / - - - - / - - : - -  - -
ClockClock Mode  : Manual   ►Clock Set       ► Time Zone      ►DST :  Off   ►
TV
 Move    Enter Return
Clock SetEnter the current date and time.TV
 Move   Adjust Return
Month▲▼
DayYear
Clock SetTV
 Move   Adjust Return
SetupPlug & Play       ►Language : English   ►Time      ►V-Chip      ► Caption      ►Melody  : Medium   ► Energy Saving : Off   ►SW Upgrade       ►
TV
 Move    Enter Return
ClockClock Mode : Manual   ►Clock Set       ► Time Zone     DST  : Off       
TV
 Move   Enter Return
AutoManual
HourMinuteam/pm
Enter the current date and time.Month▲▼
DayYear
HourMinuteam/pm
01012008
1200am

BN68-01514A-X0Eng-0202_2.indd   372008-02-02   ¿ÀÈÄ 9:46:10 
						

							
English - 8
Option 2: Setting the Clock Automatically
The Clock can be set automatically if you are receiving a digital signal.
	1.	Press the MENU button to display the menu.     Press the ▲ or ▼ button to select "Setup", then press the ENTER  button.    Press the ▲ or ▼ button to select "Time", then press the ENTER  button.
2.	Press the ENTER  button to select "Clock".
3.	Press the ENTER  button to select “Clock Mode”.    Press the ▲ or ▼ button to select “Auto”, then press the ENTER  button.
4.	Press the ▲ or ▼ button to select “Time Zone”, then press the ENTER  button.
5.	Press the ▲ or ▼ button to highlight the time zone for your local area,    then press the ENTER  button.
6.		Press the ▲ or ▼ button to select “DST”, then press the ENTER  button.
   Press the ▲ or ▼ button to select “Off” or “On”, then press the ENTER  button.
   Press the ExIT button to exit.
      Depending on the broadcast station and signal, the auto time may not be     set correctly. If this occurs, set the time manually.
    The Antenna or cable must be connected in order to set the time automatically.
Time
Clock     ►Sleep Timer  : Off   ► Timer 1 : Inactivated   ►Timer 2 : Inactivated   ►Timer  : Inactivated   ►
TV
 Move   Enter Return
- - / - - / - - - - / - - : - -  - -
ClockClock Mode : Manual   ►Clock Set       ► Time Zone     DST :  Off
TV
 Move    Enter Return
AutoManual
ClockClock Mode  : Auto   ►Clock Set       ► Time Zone      ► DST :  Off   ►
TV
 Move    Enter Return
Select the time zone in which you live.Time Zone
ClockClock Mode  : Auto   ►Clock Set       ► Time Zone      ► DST :  Off   ►
TV
 Move    Enter Return
ClockClock Mode  : AutoClock Set        Time Zone       DST :  Off   ►
TV
 Move   Enter Return
OffOn
SetupPlug & Play       ►Language : English   ►Time      ►V-Chip      ► Caption      ►Melody  : Medium   ► Energy Saving : Off   ►SW Upgrade       ►
TV
 Move    Enter Return
NewfoundlandAtlanticEasternCentralMountainPacificAlaskaHawaii
 Move   Enter Return

BN68-01514A-X0Eng-0202_2.indd   382008-02-02   ¿ÀÈÄ 9:46:13