Samsung LCD Display SyncMaster 320 MX User Manual

→   ,   → ENTER
MagicBright  is 
a feature providing the optimum viewing environment depending on the con-
tents of the image you are watching. Currently four different modes are available:  Entertain,
Internet,  Text and  Custom. Each mode has its own pre-configured brightness value. You can
easily select one of the four settings by simply pressing the  MagicBright control button.
(Not available in  Dynamic Contrast mode of On.)
1. Entertain
High brightness
For watching motion pictures such as a DVD or...

→  ,   → ENTER
Adjusts the Contrast.
Brightness MENU →   
→  ENTER  →   
→    
→  ENTER  →   
→    
→  ENTER  → →  ,   → ENTER
Adjusts the Brightness.
Sharpness MENU →   
→  ENTER  →   
→    
→  ENTER  →   
→    
→    
→  ENTER  → →  ,   → ENTER
Adjusts the Sharpness.
Color Tone  MENU →   → ENTER →   →   →   →ENTER → 
→   ,   → ENTER
The color tones can be changed.
(Not available in  Dynamic Contrast mode of On.)
1. Off
2. Cool
3. Normal
4. Warm
5. Custom  Note
If  you 
set  the  Color  Tone   to Cool,...

If you set the 
Color Tone to Off, the Color Control function is disabled
Color Control  Adjusts individual Red, Green, Blue color balance.
MENU → 
 → ENTER →   →   →   → → ENTER → 
(Not available in 
Dynamic Contrast mode of On.)  Note
If you adjust the picture by using the  Color Control function, Color Tone  will turn to the  Cus-
tom mode.
Red MENU →   
→  ENTER  →   
→    
→    
→  
→  ENTER  →  →
 ENTER
→
  →  ,   → ENTER
Green MENU →   
→  ENTER  →   
→    
→    
→  
→  ENTER  →  →
   
→  ENTER
→...

Image Lock 
Image Lock
 is  used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
(Available in  PC mode only)
MENU →   → ENTER → [Picture] →   →   →  →  → ENTER → [Image Lock]
Coarse MENU →   → ENTER →   →   →   →  →  → ENTER → 
→  ,   → ENTER
Removes  noise 

such  as  vertical  stripes.  Coarse  adjustment  may  move  the...

Auto Adjustment 
MENU 
→   
→  ENTER  →   
→    
→    
→    
→  
→  
→  ENTER  → The values of 
Fine, Coarse,  Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in  PC mode only)  Note
The direct button on the remote control is the 'AUTO' button.
Signal Balance  This is used to make up for the weak RGB signal transmitted by a long signal cable.
MENU 
→   
→  ENTER  →   
→    
→    
→    
→  
→  
→  
→  ENTER  →...

MENU 
→   
→  ENTER  →   
→    
→    
→    
→  
→ →
  →
 ENTER  →  
→  ENTER  →  →
   
→    
→  ENTER →   
→  ENTER →  ,   → ENTER
3. B-Gain
MENU  →   
→  
ENTER  →   
→    
→    
→    
→  
→ →
  →
 
ENTER  →  → ENTER →  →   →   →   → ENTER→   → ENTER
→  ,   → ENTER
4. R-Offset
MENU  →   
→  ENTER  →   
→    
→    
→    
→  
→ →
  →
 ENTER  →  → ENTER →  →   →  →   →   → ENTER→   → ENTER
→  ,   → ENTER
5. G-Offset
MENU  →   
→  ENTER  →   
→    
→    
→    
→  
→ →
  →
 ENTER  →  →
 ENTER  →  →
   
→...

→   ,   → ENTER
The Size can be switched.
1. 16:9
2. 4:3
Dynamic Contrast  MENU 
→   
→  ENTER  →   
→    
→    
→    
→  
→ →
  →
  →
  →
 ENTER  → →   ,   → ENTER
Dynamic  Contrast 
automatically  detects  the  distribution  of  the  visual  signal  and  adjusts  to
create an optimum contrast.
1. Off
2. On
Picture [ AV / HDMI / TV Mode]
Available Modes
•  
PC / DVI
•  
AV
•  
HDMI
•  
MagicInfo
•  
TV  Note
• The 

TV menu is available when a TV tuner box is installed.
• MX-2 model can use  MagicInfo...

→   ,   → ENTER
The  LCD 
Display  has  four  automatic  picture  settings  (" Dynamic",  "Standard",  "Movie"  and
"Custom") that are preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
(Not available in  Dynamic Contrast mode of On.)
1. Dynamic
2. Standard
3. Movie
4. Custom  Note
The direct button on the remote control is the 'P.MODE' button.
Custom  By using the on-screen menus, the contrast and brightness can be changed to your...

Adjusts the Brightness.
Sharpness MENU →   
→  ENTER  →   
→    
→  ENTER  →   
→    
→    
→  ENTER  → →  ,   → ENTER
Adjusts the picture Sharpness.
Color MENU →   
→  ENTER  →   
→    
→  ENTER  →   
→    
→    
→    
→  ENTER
→
  →  ,   → ENTER
Adjusts the picture Color.
Tint MENU →   
→  ENTER  →   
→    
→  ENTER  →   
→    
→    
→   →
  →
 ENTER
→  →  ,   → ENTER
Adds a natural tone to the display.
Color Tone  MENU →   → ENTER →   →   →   → ENTER → 
→   ,   → ENTER
The  color 

tones can be...

3.
Cool1
4. Normal
5. Warm1
6. Warm2  Note
If  you 
set the  Color Tone  to Cool2,  Cool1, Normal,  Warm1, or  Warm2, the  Color Temp function
is disabled.
Color Temp  MENU →   → ENTER →   →   →  →  → ENTER → 
→  ,   → ENTER
Color temp is a measure of the 'warmth' of the image colors.
(Not available in  Dynamic Contrast mode of On.)  Note
This function is only enabled if the  Color Tone is set to Off.
Size  MENU →   → ENTER →   →   →   →   →  → ENTER → 
→   ,   → ENTER
The Size can be switched....