Samsung LCD Display SyncMaster 320 MX User Manual

Troubleshooting
Self-Test Feature Check
 Note
Check  the 
following items yourself before calling for assistance. Contact a Service Center for
problems that you cannot solve by yourself.
Self-Test Feature Check 1. Turn off both your computer and the LCD Display.
2. Unplug the video cable from the back of the computer.
3. Turn on the LCD Display.The figure shown below (" Check Signal Cable") appears on a black background when
the LCD Display is working normally even though no video signal is...

• Do 
not use benzene, thinner or other flammable sub-
stances, or a wet cloth.
•
We  recommend  that  a  SAMSUNG  cleansing  agent
is used to prevent damage to the screen.
2) Maintaining the Flat Panel Display Screen.
Clean with a soft cloth (cotton flannel) smoothly. • Never use acetone, benzene or thinner.
(They may 
 cause flaws or deformation of the screen
surface.)
• The  user  will  be  required  to  pay  costs  and  related expenses for repairing damages caused.
Symptoms and Recommended Actions...

A: Check 
if  the signal cable between the computer and the LCD Display is securely con-
nected.
(Refer to Connecting a Computer)
Problems related to the Screen  Note
Problems related to the LCD Display screen and their solutions are listed.
Q: The screen is blank and the power indicator is off.
A:

Ensure that the power cord is firmly connected and the LCD Display is on.(Refer to the Connecting a Computer)
Q: " Check Signal Cable" message.
A: Ensure that the signal cable is firmly connected to...

Q: The screen color is inconsistent.
A:
Adjust color using  Custom
 under OSD Color Adjustment menu.
Q: The color image is distorted by dark shadows.
A: Adjust color using  Custom under OSD Color Adjustment menu.
Q: The color white is poor.
A: Adjust color using  Custom under OSD Color Adjustment menu.
Q: The Power Indicator blinks.
A: The  LCD  Display  is  currently  saving  the  changes  made  in  the  settings  to  the  OSD memory.
Q: The screen is blank and the power indicator light blinks every 0.5...

A: Check the polarities (+/-) of the batteries.
A:
Check if the batteries are empty.
A: Check if the power is on.
A:
Check if the power cord is securely connected.
A: Check if a special fluorescent or neon lamp is on in the vicinity.
Q & A Q: How can I change the frequency?
A: The frequency can be changed by reconfiguring the video card.  Note
That video card support can vary, depending on the version of the driver used. (Refer
to the computer or the video card manual for details.)
Q: How can I Adjusts...

Set the resolution in the Control Panel 
→ 
Appearance  and Themes → Display  → Screen
Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
A: Windows ME/2000: Set the resolution at the Control Panel  → Display → Screen Saver.
Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer
Manual).
Q: How can I clean the outer case/LCD Panel?
A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a...

Specifications
General
General
Model Name SyncMaster 320MX-2, 320MXn-2
LCD Panel
Size
32" Diagonal (80 cm)
Display area 697.68 mm (H) x 392.3 mm (V)
Pixel Pitch
0.51075 mm (H) x 0.51075 mm (V)
Synchronization
Horizontal 30 ~ 81 kHz
Vertical
56 ~ 85 Hz
Display Color 16.7 M
Resolution
Optimum resolution
1360  x  768  @  60  Hz  /  1366  x  768  @  60  Hz  depends  on
graphics card used
Maximum resolution 1366 x 768 @ 60Hz
Input Signal, Terminated
RGB Analog, DVI(Digital Visual Interface) Compliant...

Dimensions (W x H x D) / Weight
(With protection glass-option) 19.2 kg / 42.3 lbs
320MXn-2
780.0 x 482.0 x 109.0 mm / 30.7 x 19.0 x 4.3 inch (Without
Stand)
780.0 
x 545 
x  311.0  mm  /  30.7  x  21.5  x  12.2  inch  (With
Stand) / 15.1 kg / 33.3 lbs
(With protection glass-option) 20.6 kg / 45.4 lbs
VESA Mounting Interface 200 x 200 mm
Environmental considerations
320MXn-2
Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C)
Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C...

PowerSaver
This LCD 
Display has a built-in power management system called PowerSaver. This system
saves energy by switching your LCD Display to low-power mode when it has not been used
for a certain amount of time. The LCD Display automatically returns to normal operation when
you press a key on the keyboard. For energy conservation, turn your LCD Display OFF when
it  is  not  needed,  or  when  leaving  it  unattended  for  long  periods.  The  PowerSaver  system
operates with a VESA DPM compliant...

PowerSaver (When used as a Network LCD Display)
State Normal Oper-
ation Power saving
mode Power off
(Power-but- ton) Power off
(Power-switch) Power Indicator On Blinking On Off
Power
Consump- tion 320MXn-
2 200 W Less than 5 W 5 W 0 W
PowerSaver (When used as a normal LCD Display)
State Normal Oper-
ation Power saving
mode Power off
(Power-but- ton) Power off
(Power-switch) Power Indicator On Blinking On Blinking
Power
Consump- tion 320MX-2 130 W Less than 2 W 1 W 0 W
Preset Timing Modes
If the signal...