Samsung LCD Display SyncMaster 320 MX User Manual

 
 
 
Info Grid shows some basic information necessary to Settings Control.  
When each function is selected, the set value of the selected function is displayed in the slide.When selected, each 
function fetches the value for the set and displays it on the slide bar. When Select All is chosen, the default value 
is displayed. Changing a value in this screen will automatically change the mode to CUSTOM. 
1) Picture  - Available only for TV, AV, S-Video, Component, HDMI, DTV.
2) Contrast  -
Adjusts...

 
 
 1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM. 
1) Picture PC  -...

 
 
 
 Settings  
 
Audio 
1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value 
of the selected function is displayed in the slide. When selected, each function fetches the value for the set and 
displays it on the slide bar. When Select All is chosen, the default value is displayed. Changing a value in this 
screen will automatically change the mode to CUSTOM.
1)...

 
Info Grid shows some basic information necessary to Settings Control. 
1) Image Lock   - Available only for PC, BNC.
2) Coarse  - Adjusts Coarse of the selected display.
3) Fine  - Adjusts Fine of the selected display.
4) Position  - Adjusts Position of the selected display.
5) Auto Adjustment  - Self-Adjust to the incoming PC signal.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Settings Control is available only for the displays for...

 
 
An Info Grid showing several basic data items appears. 
1) Maintenance  -
Allows the Maintenance Control function for all input sources. 
2) Auto Lamp Control  - Automatically adjusts the backlight of the selected display at a specified time.  
The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 
3) Manual Lamp Control  - Allows you to adjust the backlight of the selected display regardless of the time.  
The Auto Lamp Control automatically turns off if you...

 
 
 
1) Scroll - This function is used to remove the afterimages that occur when a still screen is displayed on the selected display  
for  a  long time.  
2) Pixel Shift  - This allows the screen to be moved finely at the specified time interval.
3) Safety Screen  - The Safety Screen function is used to prevent afterimages from occurring when a still screen is displayed on the monitor for a long time.  The Interval item is used to set the repetition cycle in hour units and the Time item is 
used to set...

 
 
 
 
 
1) Video Wall  - A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen.
2) Video Wall (Screen divider)  - The screen can be divided into. You can select a number of screens with a different layout when dividing. 
zSelect a mode from Screen divider. zSelect a display from Display Selection. zThe place will be set up by pressing a number in the selected mode.  zThe MDC...

 
 
 
 
  
- Check the displays to see if any of the other displays connected have the same ID. If more than one displays have 
the same ID, those displays are not properly detected by the program due to data conflict.
- Check if the Display Set ID is a number between 0 and  25. (Adjust using the Display menu)  
Note : A Display Set ID must be a value between 0 and  25 . 
2. The display you wish to control does not appear on the other Control Info Grids  - Check to see if the display power is ON. (You...

Adjusting the LCD Display
Input
Available Modes
•  
PC / DVI
•  
AV
•  
HDMI
•  
MagicInfo
•  
TV  Note
• The 
TV menu is available when a TV tuner box is installed.
• MX-2 model can use  MagicInfo menu when mounted Network box.
Source List  MENU → ENTER →   → ENTER → 
→   ,   → ENTER
Use to select  PC, DVI  or 

other external input sources connected to the LCD Display. Use to
select the screen of your choice.
1. PC
2. DVI
3. AV
4. HDMI
5. MagicInfo
6. TV  Note
• The direct button on the remote control...

→   ,   → ENTER
Name  the 
input  device  connected  to  the  input  jacks  to  make  your  input  source  selection
easier.
1. PC
2. DVI
3. AV
4. HDMI  Note
• When  connecting 

a PC to the HDMI or DVI terminal, set  Edit Name to PC. In other cases,
set  Edit Name  to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080)
are common signals for  AV and PC, make sure to set the  Edit Name in accordance with
the input signal.
• The Picture menu changes depending on the input signal and  Edit...