Samsung LCD Display SyncMaster 320 MX User Manual

Others
(Not available in all loca-tions)
Sold separately D-Sub Cable
DVI CableLAN Cable
(Applicable to the MXn-2 model only) Wall Mount KIT
TV tuner boxNetWork Box
(Applicable to the MX-2 model only)  
 
Semi Stand KIT     Note
• You can purchase and  connect 
a separate network box or TV tuner box. For information
on how to use these, refer to their respective user manuals.
• You can only connect one external box. Introduction (Applicable to the MXn-2
model only)
Ferrite Core 
•The  ferrite  cores  are...

Your LCD Display
FrontMENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
Navigate buttons (Up-Down buttons)
Moves from one menu item to another vertically or adjusts selected menu
values.
Adjust buttons (Left-Right buttons) / Volume buttons
Moves  from  one  menu  item  to  another  horizontally  or  adjusts  selected
menu values. When OSD is not on the screen, push the button to adjust
volume.
ENTER button [ENTER]
Activates...

Power button []
Use this button for turning the LCD Display on and off.
Power indicator
Shows PowerSaver mode by blinking green Note
See PowerSaver described 
 in the manual for further information regarding
power  saving  functions.  For  energy  conservation,  turn  your  LCD  Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display. Rear
 Note
For  detailed 

information  concerning  cable...

 RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
 DVI / PC / HDMI IN [DVI/PC/HDMI AU-
DIO  IN]  (PC/DVI/HDMI  Audio  Connection Terminal (Input))
 DVI / PC / HDMI IN [HDMI]
Connect  the  HDMI  terminal  at  the  back  of
your  LCD  Display  to  the  HDMI  terminal  of
your  digital  output  device  using  a  HDMI  ca-
ble.
  DVI  /  PC  /  HDMI  IN  [RGB](PC  Video
Connection Terminal)
Using  a  D-Sub  Cable  (15  pin  D-Sub)  -  PC
mode (Analog PC)
 DVI / PC / HDMI IN [DVI]...

 RGB OUT
(Applicable to the MXn-2 model only)
 LAN (LAN Connection Terminal)
(Applicable to the MXn-2 model only) 
USB(USB Connection Terminal)
Keyboard  /  Mouse,  Mass  Storage  Device
Compatible.
(Applicable to the MXn-2 model only)
 
Kensington Lock
The  Kensington  Lock  is  a  device  used  to
physically  fix  the  system  when  using  it  in  a
public  place.  The  locking  device  has  to  be
purchased separately. The appearance and
locking  method  may  differ  from  the  illustra-
tion...

 Note
See Connecting Cables  for further information regarding cable connections.
Remote Control  Note
The  performance 
of the remote control may be affected by a TV or other electronic device
operating near the LCD Display , causing a malfunction due to interference with the frequen-
cy.  POWER
OFF
Number Buttons
DEL   button
+ VOL -
 MUTE
TV/DTV
MENU
 INFO
COLOR BUTTONS
 TTX/MIX
STILL
AUTO
S.MODE
MDC
LOCK
 SOURCE
 ENTER/PRE-CH
 CH/P 
D.MENU
GUIDE
 RETURN
Up-Down Left-Right buttons
 EXIT
 SRS...

PIP
SWAP
1.  POWER
Turns the product On.
2.   Off
Turns the product Off.
3. Number Buttons Press to change the channel.
4. DEL   button
The 
"-" 
 button  operates  only  for  DTV.  It  is  used  to  select
MMS (multi-channel) for a DTV.
5. + VOL - Adjusts the audio volume.
6.  MUTE
Pauses 
(mutes) 
 the  audio  output  temporarily.  This  is  dis-
played  on  the  lower  left  corner  of  the  screen.  The  audio
resumes if MUTE or - VOL + is pressed in the Mute mode.
7. TV/DTV Selects the TV...

18.  SOURCE
Press the button to change the input signal SOURCE.
Changing 
the 
SOURCE is only allowed for external devices
that are connected to the LCD Display at the time.
19.  ENTER/PRE-CH
This 
button 
 is  used  to  return  to  the  immediately  previous
channel.
20. CH/P In TV mode, selects TV channels.
21.D.MENU DTV menu display
22.GUIDE

Electronic Program Guide (EPG) display.
23.  RETURN
Returns to the previous menu.
24.  Up-Down 

Left-Right but-
tons Moves from one menu item to another...

SAP Mono ↔ SAP Mono
30. PIPEvery time you press the button, a PIP screen appears.
- This fuction does not work for this LCD Display.
31.
SWAPSwaps the contents of the PIP and main image. The image
in the PIP window will appear on the main screen, and the
main screen image will appear in the PIP window.
- This fuction does not work for this LCD Display.
Mechanical Layout
Mechanical Layout Introduction 

LCD Display Head
NETWORK MODEL SIZE
Installation VESA Bracket
•When installing VESA, make sure to comply with the international VESA standards.
•
Purchasing  VESA  Bracket  and  Installation  Information  :  Please  contact  your  nearest
SAMSUNG  Distributor  to  place  an  order.  After  your  order  is  placed,  installation  profes-
sionals will visit you and install the bracket.
• At least 2 persons are needed in order to move the LCD Display.
• SAMSUNG is not responsible for any product damage or...