Samsung LCD Display SyncMaster 320 MX User Manual

Using the Software
Monitor Driver
 Note
When  prompted 
by the operating system for the monitor driver, insert the CD-
ROM included with this monitor. Driver installation is slightly different from one
operating  system  to  another.  Follow  the  directions  appropriate  for  the  oper-
ating system you have.
Prepare a blank disk and download the driver program file at the Internet web
site shown here.
Internet web site :
http://www.samsung.com/ (Worldwide) Installing the Monitor Driver (Automatic)...

 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
Installing the Monitor Driver (Manual) Microsoft®
 Windows Vista™‚ Operating System
1. Insert your Manual CD into your CD-ROM drive.
2. Click  (Start) 
and "Control Panel". Then, double-click on "Appearance and Personal-
ization". 3. Click "Personalization" and then "Display...

If  the  message  "Windows  needs..."  is  displayed,  as  shown  in  the  figure  below,  click
"Continue".
 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
6. Click "Update Driver..." in the "Driver" tab. 7. Check 
the 
 "Browse  my  computer  for  driver  software"  checkbox  and  click  "Let  me  pick
from a list of device drivers...

9. Select 
the model that matches your monitor from the list of monitor models on the screen,
and click "Next".  
10. Click "Close"  →  "Close" → "OK"  → "OK" on the following screens displayed in sequence. Microsoft
®
 Windows ®
 XP Operating System Using the Software 

1. Insert CD into the CD-ROM drive.
2.
Click "Start"  →
 "Control Panel" then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6. Select "Don't search, I...

7. Click 
the "Browse" button then choose A:(D:\Driver) and choose your monitor model in
the model list and click the "Next" button. 8. If 
you can see following message window, then click the "Continue Anyway" button. Then
click "OK" button.  
 Note
This  monitor 
driver is under certifying MS logo, and this installation doesn't damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9. Click the "Close"...

 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2.
Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button.
How to install
1. Click "Start", "Setting", "Control Panel"....

4. Select the "Monitor" tab.
5.
Click the "Change" button in the "Monitor Type" area.
6.
Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location..." then click "Next" button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver) then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you con- nected to your computer and click...

10. You 
have  finished  setting  up  your  monitor.  Execute  X-Window  after  setting  other  re-
quested hardware. Using the Software 

 
 
 
 
Introduction  
 
 
 A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously 
operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and 
a display. Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a 
display.
Main Screen 
 
  Click Start > Program > Samsung > MDC System to start the program. 
  Select a set to see the volume of the selected...