Samsung LCD Display SyncMaster 320 MX User Manual

Safety Screen 
The 
Safety Screen   function is used to prevent afterimages that may appear when a still picture
is displayed on the screen over a long time.
• The Safety Screen function scrolls the screen for the specified period of time.
• This function is not available when the power is turned off.
MENU  →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → Pixel Shift
Pixel Shift
MENU →   
→  
→  
→  
ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  
ENTER  → → ENTER →  →...

Sets how many pixels the screen moves vertically.
Five adjustment levels: 0, 1, 2, 3, and 4.
Time MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →
 ENTER  →  →
   
→  
→  
→  ENTER  →  →
   ,   
→  ENTER Set the time interval for performing the horizontal or vertical movement, respectively.
Timer
Timer MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →   → ENTER →  → ENTER →  →   ,   → ENTER
You can set the timer for Screen Burn...

You can change the 
Safety Screen Type.
1. Scroll
2. Bar
3. Eraser
Period MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →
   
→  
ENTER  →  →
   
→    
→  
ENTER  → [Period ] →    ,   
→  ENTER Use this function to set the execution period for each mode set in the timer.
Time MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →
   
→  ENTER  →  →
   
→    
→    
→  ENTER  →  →
   ,   
→  ENTER Within the set period of time specify a time...

This function prevents after-images on the screen by moving all the pixels on the LCD ac-
cording to a pattern.
Use 
this 
function when there are remaining after-images or symbols on the screen, especially
when you displayed a still image on the screen for a long time.
Bar MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →   →   →   →ENTER → 
This  function  prevents  after-images  on  the  screen  by  moving  long  black  and  white  vertical
lines.
Eraser MENU →   
→...

→   ,   → ENTER
When  the 
picture  is  not  displayed  properly  on  the  screen  when  setting  the  graphics  card
resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz
or  1366  x768  @  60Hz,  by  using  this  function(Resolution  Select),  you  can  have  the  picture
displayed on the screen in the specified resolution.  Note
Available in  PC mode only
1. Off
2. 1024 X 768
3. 1280 X 768
4. 1360 x 768
5. 1366 X 768  Note
Selecting  the 

menu is only allowed when the...

Side Gray 
MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
ENTER →  →   ,   → ENTER
Select the brightness of the grey for the screen background.
1. Off
2. Light
3. Dark
Reset Reverts the 
product  settings  to  factory  defaults.  The  Reset  function  is  only  available  when
PC /  DVI is being used.
MENU  →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
  → ENTER → 
Image Reset 
MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→...

OSD Rotation 
MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
  →  →  → ENTER → [OSD Rotation ]
→  ,   → ENTER
OSD Rotate
1. Landscape
2. Portrait
Lamp Control  MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
  →  → ENTER → 
→  ,   → ENTER
Adjusts the inverter lamp in order to reduce energy consumption.  Note
This  function 
does not operate when  Dynamic Contrast is set to On in PC, DVI,  AV, HDMI,
TV modes.
Multi Control
Available...

Multi Control 
Assigns an individual ID to the SET.
MENU → 
 →  →  →   → ENTER →  → ENTER
→   ,   → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use  to  select 
the  transmitter  functions  of  the  individual  SET.  Only  a  SET  where  the  ID
corresponds to the transmitter setting becomes activated. Adjusting the LCD Display 

MagicInfo 
Available Modes 
z PC / DVI  
z AV  
z HDMI  
z MagicInfo   
z TV   
 Note zThe  TV menu is available when a TV tuner box is installed. zMX-2 model can use  MagicInfo menu when mounted Network box. 
 Note zFor MagicInfo , a remote control is available for  MagicInfo. However, it is recommended using a separate USB 
keyboard.  
zFor  MagicInfo  in Device mode, moving external devices while booting may cause errors. Set up external devices only 
if the LCD Display turns on. 
zDo not unplug the...

 
1. Select  MagicInfo  in the Source List menu. 
2. The MUISetup screen appears. Select the language you want to use. 
3. Press the Install button. 
If you select Do not show again and click the Install bu tton, the Scheduler screen is displayed after rebooting. 
4. Connect your keyboard and mouse and press the “ALT + F12” keys on your keyboard. 
5. The Windows Desktop is displayed and the MagicInfo icon (the  image will be inserted) appears. Move the cursor over the 
icon.  
 Note If the  MagicInfo...