Samsung LCD Display SyncMaster 320 MX User Manual

							Safety Screen 
The 
Safety Screen   function is used to prevent afterimages that may appear when a still picture
is displayed on the screen over a long time.
• The Safety Screen function scrolls the screen for the specified period of time.
• This function is not available when the power is turned off.
MENU  →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → Pixel Shift
Pixel Shift
MENU →   
→  
→  
→  
ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  
ENTER  → → ENTER →  → ENTER →  →   ,   → ENTER
To prevent after-images on the screen you can use this function, so that every minute pixels
on the LCD are moved in horizontal or vertical direction.
1.
Off
2. On
Horizontal Dot MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →
 ENTER 
→  →
   
→  ENTER 
→  →
    ,   
→
ENTER Sets how many pixels the screen moves horizontally.
Five adjustment levels: 0, 1, 2, 3, and 4.
Vertical Line MENU →   
→  
→  
→  ENTER 
→   
→   →
  →
  →
   
→    
→    
→    
→  ENTER 
→ →
 ENTER  →  →
   
→  
→  ENTER  →  →
   ,   
→
ENTER Adjusting the LCD Display 
						

							Sets how many pixels the screen moves vertically.
Five adjustment levels: 0, 1, 2, 3, and 4.
Time MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →
 ENTER  →  →
   
→  
→  
→  ENTER  →  →
   ,   
→  ENTER Set the time interval for performing the horizontal or vertical movement, respectively.
Timer
Timer MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →   → ENTER →  → ENTER →  →   ,   → ENTER
You can set the timer for Screen Burn Protection.
If 
you 
start the operation to erase any residual image, the operation will be performed for the
set period of time and then automatically finish.
1. Off
2. On
Mode MENU →   
→  
→  
→  
ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  
ENTER  → →   → ENTER →  →   → ENTER →  →   ,   → ENTER
Adjusting the LCD Display 
						

							You can change the 
Safety Screen Type.
1. Scroll
2. Bar
3. Eraser
Period MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →
   
→  
ENTER  →  →
   
→    
→  
ENTER  → [Period ] →    ,   
→  ENTER Use this function to set the execution period for each mode set in the timer.
Time MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →
   
→  ENTER  →  →
   
→    
→    
→  ENTER  →  →
   ,   
→  ENTER Within the set period of time specify a time for execution.
•
Mode- Scroll : 1~5 sec
• Mode- Bar, Eraser : 10~50 sec
Scroll MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →   →   → ENTER →  Adjusting the LCD Display 
						

							This function prevents after-images on the screen by moving all the pixels on the LCD ac-
cording to a pattern.
Use 
this 
function when there are remaining after-images or symbols on the screen, especially
when you displayed a still image on the screen for a long time.
Bar MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →   →   →   →ENTER → 
This  function  prevents  after-images  on  the  screen  by  moving  long  black  and  white  vertical
lines.
Eraser MENU →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→  ENTER  → →   →   →   →   →ENTER → 
This function prevents after-images on the screen by moving a rectangular pattern.
Resolution Select  MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ ENTER
→  Adjusting the LCD Display 
						

							→   ,   → ENTER
When  the 
picture  is  not  displayed  properly  on  the  screen  when  setting  the  graphics  card
resolution of the computer to 1024 x 768 @ 60Hz, 1280 x 768 @ 60Hz, 1360 x 768@ 60Hz
or  1366  x768  @  60Hz,  by  using  this  function(Resolution  Select),  you  can  have  the  picture
displayed on the screen in the specified resolution.  Note
Available in  PC mode only
1. Off
2. 1024 X 768
3. 1280 X 768
4. 1360 x 768
5. 1366 X 768  Note
Selecting  the 

menu is only allowed when the graphics resolution is set to 1024 x 768 @ 60Hz,
1280 x 768 @ 60Hz, 1360 x 768@ 60Hz or 1366 x768 @ 60Hz.
Power On Adjustment  MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
 ENTER
→  →   ,   → ENTER
Adjusts the Power On time for the screen. Caution: Set the Power On time to be longer to avoid overvoltage.Adjusting the LCD Display 
						

							Side Gray 
MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
ENTER →  →   ,   → ENTER
Select the brightness of the grey for the screen background.
1. Off
2. Light
3. Dark
Reset Reverts the 
product  settings  to  factory  defaults.  The  Reset  function  is  only  available  when
PC /  DVI is being used.
MENU  →   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
  → ENTER → 
Image Reset 
MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
  → ENTER →  → ENTER → 
→  ,  → ENTER
 Note
Available in  PC mode only  Note
The Reset function is not available when  Video Wall is On.
Color Reset  MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
  → ENTER →  →  → ENTER → 
→  ,   → ENTERAdjusting the LCD Display 
						

							OSD Rotation 
MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
  →  →  → ENTER → [OSD Rotation ]
→  ,   → ENTER
OSD Rotate
1. Landscape
2. Portrait
Lamp Control  MENU 
→   
→  
→  
→  ENTER  →   
→   →
  →
  →
   
→    
→    
→    
→    
→ →
  →
  →  → ENTER → 
→  ,   → ENTER
Adjusts the inverter lamp in order to reduce energy consumption.  Note
This  function 
does not operate when  Dynamic Contrast is set to On in PC, DVI,  AV, HDMI,
TV modes.
Multi Control
Available Modes
•  
PC / DVI
•  
AV
•  
HDMI
•  
MagicInfo
•  
TV  Note
• The 

TV menu is available when a TV tuner box is installed.
• MX-2 model can use  MagicInfo menu when mounted Network box.Adjusting the LCD Display 
						

							Multi Control 
Assigns an individual ID to the SET.
MENU → 
 →  →  →   → ENTER →  → ENTER
→   ,   → [0~9]
• ID Setup
Assigns distinctive IDs to the SET.
• ID Input
Use  to  select 
the  transmitter  functions  of  the  individual  SET.  Only  a  SET  where  the  ID
corresponds to the transmitter setting becomes activated. Adjusting the LCD Display 
						

							MagicInfo 
Available Modes 
z PC / DVI  
z AV  
z HDMI  
z MagicInfo   
z TV   
 Note zThe  TV menu is available when a TV tuner box is installed. zMX-2 model can use  MagicInfo menu when mounted Network box. 
 Note zFor MagicInfo , a remote control is available for  MagicInfo. However, it is recommended using a separate USB 
keyboard.  
zFor  MagicInfo  in Device mode, moving external devices while booting may cause errors. Set up external devices only 
if the LCD Display turns on. 
zDo not unplug the LAN cable used for the network (ex: video display). Otherwise, the program (MagicInfo) may stop. 
If you do unplug the cable, restart the system.  
zDo not unplug the LAN cable used by an USB device (ex: video display). Otherwise, the program (MagicInfo) may stop. zTo access other sources, press the SOURCE button in  MagicInfo. zThe preset password for the LCD Display is 000000. zThe server programs Power-On option works only if the LCD Displays power is completely shut off. 
Please make sure not to use the Power-On option when the  LCD Display is in the process of shutting down since this 
may cause system errors on the LCD Display. 
zIn the OSD image of  MagicInfo, Network mode is the same as Device. zWhen using  MagicInfo with the MagicInfo Server Program: perform Network mode.  zWhen using  MagicInfo with the device directly connected to  LCD Display : execute Device mode.  zPress ALT + F12 to directly go to the  MagicInfo Window screen.  zTo setup MagicInfo  on a Windows screen, a keyboard and mouse are required.  zTo setup MagicInfo  on a Windows screen, refer to the MagicInfo Server Help.  
It is highly recommended not to turn off the AC power during an operation.  
zFor pivoted LCD Displays, ticker transparency is not supported.  zFor pivoted LCD Displays, a screen resolution of up to 720*480(SD) is supported for movies.  zFor drive D:,  EWF is not applied. zWhen the contents of Setup have been changed when  EWF is in the Enable  state, to save the changes in the disk, 
you must  Commit them. 
zBy selecting  Disable, Enable  or Commit , the system is restarted. 
MagicInfo  
 
 
 
 
 
 
 
  
						

							 
1. Select  MagicInfo  in the Source List menu. 
2. The MUISetup screen appears. Select the language you want to use. 
3. Press the Install button. 
If you select Do not show again and click the Install bu tton, the Scheduler screen is displayed after rebooting. 
4. Connect your keyboard and mouse and press the “ALT + F12” keys on your keyboard. 
5. The Windows Desktop is displayed and the MagicInfo icon (the  image will be inserted) appears. Move the cursor over the 
icon.  
 Note If the  MagicInfo  icon is not displayed on the noti fication area, double click the MagicInfo  icon on the window desktop. The 
icon will appear.