Samsung LCD Display SyncMaster 320 MX User Manual

							 
  
Main IconsSelect Button
RemoconInfo Grid
Safety LockDisplay Selection
Port SelectionControl Tools 
1. Use the main icons to switch into each screen.
2. Allows you to enable or disable the remote control signal receiving function of the display unit. 
3. Set the Safety Lock function. 
When setting the Lock function, you can only operate power and lock buttons on the remote control and set.
4. The setting for the PC Serial Port can change. The original value is COM1. 
5. Click Select all or Clear to select or clear all displays.
6. Use Grid to view brief information on selected display.
7. Select a display from Display Selection. 
8. Use Control Tools to control displays.
   The remote control Enable/Disable function operates whether or not the power is On/Off, and this 
applies to all displays connected to the MDC. However, regardless of the status at the time the MDC is 
shut down, the remote control signal receiving function of all displays is initialized to Enable when the 
MDC is closed.
Port Selection  
  
						

							 
 
1. The Multiple Display Control is originally set to COM1.
2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu.
3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable. 
4. The selected port is stored in the program and used for the next program as well.  
 Power Control 
 
1. Click Power Control of the main icons and the Power Control screen appears. 
						

							 
Info Grid shows some basic information necessary to Power Control.
  1)  (Power Status)
 2) Input 
 3) Image Size
 4) On Timer
 5) Off Timer
2. Use the Select All button or Check Box to choose a display to control.
 Power Control allows controlling some of the functions of the selected display. 
1) Power On/Off  
						

							 
 
 -
Turns the power of the selected display On/Off. 
2) Volume   - Controls the volume level of the selected display.  It receives the volume value of the selected display from the sets and displays it in the slider. 
(When you cancel the selection or choose Select All, the value returns to the default value 10) 
3)  (Mute On/Off)  
- Turns on/off the Mute function of the selected display. 
When selecting one set at a time, turn on the Mute function for the selected set. 
The Mute function is disabled automatically when you adjust the volume level.  
(The values return to the default settings when you undo the selections or choose Select All.) 
The Power Control feature is available for all displays. 
The Volume Control and Mute features are available only for the displays whose power status is ON. 
 Input Source  
 
1. Click Input Source of the main icons and the Input Source control screen appears.   Click Select All or use Check Box to select a display to control.
• TV Mode 
• PC Mode  
						

							 
 
 
Info Grid shows some basic information necessary to Input Source Control.
1) PC  - Changes the Input Source of the selected display to PC.
2) BNC  - Changes the Input Source of the selected display to BNC.
3) DVI  - Changes the Input Source of the selected display to DVI.
4) TV  -Chan
ges the Input Source of the selected display to TV. 
5) DTV  -Chan
ges the Input Source of the selected display to DTV. 
6) AV  -Chan
ges the Input Source of the selected display to AV. 
7) S-Video  - Changes the Input Source of the selected display to S-
Video. 
8) Component  -Chan
ges the Input Source of the selected display to Component. 
9) MagicInfo  -
The Input source of MagicInfo works only on MagicInfo model. 
10) HDMI  -Chan
ges the Input Source of the selected display to HDMI. 
11) Channel  - Channel arrow appears when the Input Source is TV.
TV Source can be selected only in products with TV and controlling channels is allowed only when 
Input Source is TV.   
The Input Source Control feature is available only for the displays whose power status is ON.
 Image Size 
 
PC, BNC, DVI
1. Click Image Size of the main icons and the Image Size control screen appears.  
						

							 
 
 
Info Grid shows some basic information necessary to Image Size Control.
1)  ( Power Status) 
- Shows the power status of the current display.
2) Image Size   - Shows the current Image Size of the display in use.
3) Input   - Shows the current Input Source of the display in use.
4) Info Grid displays only the displays whose Input Source is PC, BNC, DVI. 
5) PC Source - When you click Image Size, the PC Source tab first appear.   - The Image Size Control button controls Image Size available for PC, BNC, DVI.
6) Video Source   - Click the Video Source tab to control Image Size for respective Input Source.
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
Image Size Control is available only for the displays for which power status is ON.
 Image Size  
 
TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV
1. Click Image Size of the main icons and the Image Size control screen appears. 
						

							 
 
 
Info Grid shows some basic information necessary to Image Size Control.
1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV.   Click Select All or use Check Box to select a display to control.
2) Info Grid displays only the display having TV, AV, S-Video, Component or DVI(HDCP) as input source. 
3) Switch Image Size of the selected display randomly. Note: Auto Wide, Zoom1 and Zoom2 are not available for selection when the input signal type for 
Component and DVI (HDCP) is 720p or 1080i.  
(The Auto Wide mode is available only for TV, AV, and S-Video.) 
4) The screen modes can only be adjusted when a TV (PAL only) is connected and the Image Size item is set to Auto  Wide. 
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
The Image Size Control feature is available only for the displays whose power status is ON.
 
 Time  
 
1. Click Time of the main icons and the Time Control screen appears. 
						

							 
 
 
Info Grid shows some basic information necessary to Time Control.
1) Current Time  - Set the current time for the selected display (PC Time).
- To change the current time, first change the PC Time.
2) On Time Setup  - Set the Hour, Minute, AM/PM of On Time Setup, Status, Source, Volume of the selected display.
3) Off Time Setup  - Set the Hour, Minute, and AM/PM, Status for Off Time Setup of the selected display.
4) Shows the On Time settings.
5) Shows the Off Time settings.
The Input source of MagicInfo works only on MagicInfo model.   
The Input source of TV works only on TV model.  
Time Control is available only for the displays for which the power status is ON. 
At On Time Setup, TV Source functions only for TV Model. 
At On Time Setup, MagicInfo Source functions only for MagicInfo Model.   
  
 PIP  
 
PIP Size
1. Click PIP of the main icons and the PIP control screen appears.   Click Select All or use Check Box to select a display to control.  
						

							 
 
 
Info Grid shows some basic information necessary to PIP Size Control.
1) PIP Size  - Shows the current PIP Size of the display in use.
2) OFF  - Turns off the PIP of the selected display.
3) Large  - Turns on the PIP of the selected display and changes the size to Large.
4) Small  - Turns on the PIP of the selected display and changes the size to Small.
5) Double 1  - Turns on the PIP of the selected display and changes the size to Double 1.
6) Double 2   - Turns on the PIP of the selected display and changes the size to Double 2. 
7) Double 3 (Picture By Picture)  - Turns on the PBP of the selected display and changes the size to Double 3. 
The Input source of MagicInfo works only on MagicInfo model. 
The Input source of TV works only on TV model. 
PIP Size can be controlled with turning on the LCD Display power.
 PIP  
 
PIP Source
1. Click PIP of the main icons and the PIP control screen appears. 
						

							 
 
 
Info Grid shows some basic information necessary to PIP Source Control.
1) PIP Source   - PIP Source can be controlled with turning on the LCD Display power. 
2) PC   - Changes the source of the PIP of the selected display to PC. 
3) BNC   - Changes the source of the PIP of the selected display to BNC. 
4) DVI   - Changes the source of the PIP of the selected display to DVI. 
5) AV   - Changes the source of the PIP of the selected display to AV. 
6) S-Video   - Changes the source of the PIP of the selected display to S-Video. 
7) Component   - Changes the source of the PIP of the selected display to Component. 
8) HDMI  - Changes the source of the PIP of the selected display to HDMI. 
Note: Some of the PIP Sources may not be available for selection, depending on the input source type 
of the Main Screen.
The Input source of MagicInfo works only on MagicInfo model. 
The PIP Control feature is available only for the displays whose power status is ON and the PIP 
function is set to ON.
 Settings  
 
Picture
1. Click Settings of the main icons and the Settings Control screen appears.