Samsung LCD Display SyncMaster 320 MX User Manual

							Others
(Not available in all loca-tions)
Sold separately D-Sub Cable
DVI CableLAN Cable
(Applicable to the MXn-2 model only) Wall Mount KIT
TV tuner boxNetWork Box
(Applicable to the MX-2 model only)  
 
Semi Stand KIT     Note
• You can purchase and  connect 
a separate network box or TV tuner box. For information
on how to use these, refer to their respective user manuals.
• You can only connect one external box. Introduction (Applicable to the MXn-2
model only)
Ferrite Core 
•The  ferrite  cores  are  used  to  shield  the  cables  from  interfer-
ence.
• When  connecting  a  cable,  open  the  ferrite  core  and  clip  it around the cable near the plug. 
						

							Your LCD Display
FrontMENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
Navigate buttons (Up-Down buttons)
Moves from one menu item to another vertically or adjusts selected menu
values.
Adjust buttons (Left-Right buttons) / Volume buttons
Moves  from  one  menu  item  to  another  horizontally  or  adjusts  selected
menu values. When OSD is not on the screen, push the button to adjust
volume.
ENTER button [ENTER]
Activates a highlighted menu item.
SOURCE button [SOURCE]
Switches from PC mode to Video mode. Changing the source is only al-
lowed  for  external  devices  that  are  connected  to  the  LCD  Display  at  the
time.
[PC] → [DVI] → [AV] → [HDMI] → [MagicInfo] → [TV]
 Note
• The 

TV menu is available when a TV tuner box is installed.
• MX-2 model can use  MagicInfo menu when mounted Network box.
D.MENU
Opens the on-screen D.MENU.  Note
• This is available when a TV tuner box is installed. Introduction 
						

							Power button []
Use this button for turning the LCD Display on and off.
Power indicator
Shows PowerSaver mode by blinking green Note
See PowerSaver described 
 in the manual for further information regarding
power  saving  functions.  For  energy  conservation,  turn  your  LCD  Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display. Rear
 Note
For  detailed 

information  concerning  cable  connections,  refer  to  Connecting  Cables  under
Setup. The LCD Display 's configuration at the back may vary slightly depending on the LCD
Display model.
 POWER S/W ON [ │ ] / OFF [O]
Switches the LCD Display On/Off.
 POWER IN
The  power  cord  plugs  into  the  LCD  Display
and the wall plug.  Introduction 
						

							 RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
 DVI / PC / HDMI IN [DVI/PC/HDMI AU-
DIO  IN]  (PC/DVI/HDMI  Audio  Connection Terminal (Input))
 DVI / PC / HDMI IN [HDMI]
Connect  the  HDMI  terminal  at  the  back  of
your  LCD  Display  to  the  HDMI  terminal  of
your  digital  output  device  using  a  HDMI  ca-
ble.
  DVI  /  PC  /  HDMI  IN  [RGB](PC  Video
Connection Terminal)
Using  a  D-Sub  Cable  (15  pin  D-Sub)  -  PC
mode (Analog PC)
 DVI / PC / HDMI IN [DVI] (PC Video Con-
nection Terminal)
Using  a  DVI  Cable  (DVI-D  to  DVI-D)  -  DVI
mode (Digital PC)
   
 AV IN [VIDEO] (VIDEO Connection Ter-
minal)
Connect the [ VIDEO ] terminal of your LCD
Display  to  the  video  output  terminal  of  the
external device using a VIDEO cable.
 AV AUDIO IN [L-AUDIO-R](LCD Display
Audio Connection Terminal (Input))
 AV AUDIO OUT [L-AUDIO-R] (LCD Dis-
play Audio Connection Terminal (Output))  Introduction
 DC OUT [5V/1.5A]
Otherwise, this may result in damage to the product.
Make sure to use connecting DC-OUT terminal
to the authorized TV-Tuner Box[SBB-DT*]. 
						

							 RGB OUT
(Applicable to the MXn-2 model only)
 LAN (LAN Connection Terminal)
(Applicable to the MXn-2 model only) 
USB(USB Connection Terminal)
Keyboard  /  Mouse,  Mass  Storage  Device
Compatible.
(Applicable to the MXn-2 model only)
 
Kensington Lock
The  Kensington  Lock  is  a  device  used  to
physically  fix  the  system  when  using  it  in  a
public  place.  The  locking  device  has  to  be
purchased separately. The appearance and
locking  method  may  differ  from  the  illustra-
tion depending on the manufacturer. Refer to
the  manual  provided  with  the  Kensington
Lock for proper use. The locking device has
to be purchased separately.
 Note
The location of the Kensington Lock may be
different depending on its model.
Using the Anti-Theft 

Kensington Lock
1. Insert  the  locking  device  into  the  Ken- sington slot on the LCD Display  and
turn it in the locking direction  .
2. Connect the Kensington Lock cable.
3. Fix 

the  Kensington  Lock  to  a  desk  or  a
heavy stationary object.
Introduction 
						

							 Note
See Connecting Cables  for further information regarding cable connections.
Remote Control  Note
The  performance 
of the remote control may be affected by a TV or other electronic device
operating near the LCD Display , causing a malfunction due to interference with the frequen-
cy.  POWER
OFF
Number Buttons
DEL   button
+ VOL -
 MUTE
TV/DTV
MENU
 INFO
COLOR BUTTONS
 TTX/MIX
STILL
AUTO
S.MODE
MDC
LOCK
 SOURCE
 ENTER/PRE-CH
 CH/P 
D.MENU
GUIDE
 RETURN
Up-Down Left-Right buttons
 EXIT
 SRS
MagicInfo
P.MODE
 DUAL/MTS
Introduction 
						

							PIP
SWAP
1.  POWER
Turns the product On.
2.   Off
Turns the product Off.
3. Number Buttons Press to change the channel.
4. DEL   button
The 
"-" 
 button  operates  only  for  DTV.  It  is  used  to  select
MMS (multi-channel) for a DTV.
5. + VOL - Adjusts the audio volume.
6.  MUTE
Pauses 
(mutes) 
 the  audio  output  temporarily.  This  is  dis-
played  on  the  lower  left  corner  of  the  screen.  The  audio
resumes if MUTE or - VOL + is pressed in the Mute mode.
7. TV/DTV Selects the TV and DTV mode directly.
8. MENU Opens  the  on-screen  menu  and  exits  from  the  menu  or
closes the adjustment menu.
9. Activates a highlighted menu item.
10.  INFO
Current 
picture 
 information  is  displayed  on  the  upper  left
corner of the screen.
11.COLOR BUTTONS Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu.
12.  TTX/MIX
TV 
channels 
 provide  written  information  services  via  tele-
text.
- Teletext Buttons For more information > TTX / MIX
13.STILL Press the 

button once to freeze the screen. Press it again
to unfreeze.
14.AUTO Adjusts  the  screen  display  automatically  in  PC  mode.  By
changing the resolution in the control panel, auto function is
performed.
15. S.MODE When pressing this button, the current mode is displayed at
the  bottom  centre  of  the  screen.  The  LCD  Display  has  a
built-in high fidelity stereo amplifier. Then press the button
again  to  circle  through  available  preconfigured  modes.
( Standard → Music  → Movie  → Speech  → Custom )
16.MDC MDC Quick Launch Button.
17.LOCK Activates or deactivates all function keys on both the remote
control and the LCD Display except for the Power and LOCK
buttons.Introduction 
						

							18.  SOURCE
Press the button to change the input signal SOURCE.
Changing 
the 
SOURCE is only allowed for external devices
that are connected to the LCD Display at the time.
19.  ENTER/PRE-CH
This 
button 
 is  used  to  return  to  the  immediately  previous
channel.
20. CH/P In TV mode, selects TV channels.
21.D.MENU DTV menu display
22.GUIDE

Electronic Program Guide (EPG) display.
23.  RETURN
Returns to the previous menu.
24.  Up-Down 

Left-Right but-
tons Moves from one menu item to another horizontally, vertically
or adjusts selected menu values.
25.  EXIT
Exits from the menu screen.
26.  SRS
Selects SRS TruSurround XT mode.
27.MagicInfo MagicInfo Quick Launch Button.
28. P.MODE When 

you  press  this  button,  current  picture  mode  is  dis-
played on the lower center of the screen.
AV / HDMI / TV : P.MODE
The LCD Display has four automatic picture settings that are
preset  at  the  factory.  Then  push  button  again  to  circle
through  available  preconfigured  modes.  (  Dynamic →
Standard  → Movie  → Custom )
PC / DVI / MagicInfo: M/B (MagicBright)
MagicBright is a feature providing the optimum viewing en-
vironment depending on the contents of the image you are
watching. Then push button again to circle through available
preconfigured modes. ( Entertain → Internet  → Text  → Cus-
tom )
29.  DUAL/MTS
DUAL-
STEREO/MONO,  DUAL  l  /  DUAL  ll  and  MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote
control while watching TV.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type MTS/S_Mode Default
FM Stereo Mono Mono Manual
Change
Stereo Mono ↔ Stereo
Introduction 
						

							SAP Mono ↔ SAP Mono
30. PIPEvery time you press the button, a PIP screen appears.
- This fuction does not work for this LCD Display.
31.
SWAPSwaps the contents of the PIP and main image. The image
in the PIP window will appear on the main screen, and the
main screen image will appear in the PIP window.
- This fuction does not work for this LCD Display.
Mechanical Layout
Mechanical Layout Introduction 
						

							LCD Display Head
NETWORK MODEL SIZE
Installation VESA Bracket
•When installing VESA, make sure to comply with the international VESA standards.
•
Purchasing  VESA  Bracket  and  Installation  Information  :  Please  contact  your  nearest
SAMSUNG  Distributor  to  place  an  order.  After  your  order  is  placed,  installation  profes-
sionals will visit you and install the bracket.
• At least 2 persons are needed in order to move the LCD Display.
• SAMSUNG is not responsible for any product damage or any injury caused by installation at customer's discretion. Introduction