Runco XP-50DHD Plasma Display User Manual

PlasmaWall XP Series Installation/Operation Manual 5 
PREL
IMINARY
2.1 
PlasmaWall at a 
Glance
Controls and IndicatorsFigure 2-1, Figure 2-2 and Figure 2-3 show the PlasmaWall front-panel controls and 
indicators. 
Figure 2-1. PlasmaWall XP-50DHD and XP-OPAL50DHD Front-Panel Controls 
and Indicators
Figure 2-2. PlasmaWall XP-65DHD and XP-OPAL65DHD Front-Panel Controls 
and Indicators
2. Controls and Functions
1
3
2(behind
front bezel)4
1
2
34
(behind
front bezel) 

Controls and Functions
6 PlasmaWall XP Series Installation/Operation Manual
PREL
IMINARY
Figure 2-3. PlasmaWall XP-103DHD Front-Panel Controls and Indicators
1.DISPLAY STAND  
Optional accessory for table-top installations.
2.POWER BUTTON 
Connects or disconnects the display panel from the AC power source. 
3.STANDBY/ON INDICATOR  
- Lights green to indicate normal operation;  
- Lights red to indicate that the PlasmaWall is in standby mode. 
4.REMOTE CONTROL SENSOR  
Receives the signals from the remote...

Controls and Functions
PlasmaWall XP Series Installation/Operation Manual 7 
PREL
IMINARY
ConnectorsFigure 2-4 shows the rear-panel connector locations on the PlasmaWall. 
Figure 2-4. PlasmaWall Rear Panel
SERIAL PC    IN
AUDIO
SLOT1 SLOT3
PR/CR/R PB/CB/BY/GAUDIORLCOMPONENT/RGB INSLOT2AV INAB
XP-50DHD / 
XP-OPAL50DHD
12345
6
XP-65DHD / 
XP-OPAL65DHD
XP-103DHD6
6 

Controls and Functions
8 PlasmaWall XP Series Installation/Operation Manual
PREL
IMINARY
1.SLOT 1  
Not used.
2.SLOT 2 (Dual HDMI input)  
Two, HDCP-compliant digital video inputs. Connect the HDMI output from the 
DHD Controller to input “A” in this slot.
3.SLOT 3 (COMPONENT/RGB input) 
Not used.
4.PC IN  
Not used.
5.RS-232C (9-pin, male D-Sub)  
Connect the Display Control (RS-232 OUT) port on the DHD Controller to this input. 
6.POWER INPUT 
Connect the PlasmaWall to AC power here. 
2.2 
DHD...

Controls and Functions
PlasmaWall XP Series Installation/Operation Manual 9 
PREL
IMINARY
5.LEFT BUTTON 
Used to direct-select inputs or move the menu cursor left in the OSD. When no menu 
is present on-screen, the LEFT button toggles through the different sources, in this 
order: 
 
HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component - S-Video 2 - S-Video 1 - 
Composite
 Video
6.DOWN BUTTON 
Use to direct-select aspect ratios or move the menu cursor down in the OSD. When 
no menu is present on-screen,...

Controls and Functions
10 PlasmaWall XP Series Installation/Operation Manual
PREL
IMINARY
2.3 
DHD Controller Rear 
Panel
Figure 2-6 shows the rear connector panel on the DHD Controller.
Figure 2-6. DHD Controller Rear Panel
Outputs1.HDMI Out 
Connect this to the SLOT 2/INPUT A connector on the PlasmaWall (see Figure 2-4). 
2.Display Control 
Connect this to the SERIAL input on the PlasmaWall, using the provided 
communication cable and adapter. 
3.TRIGGERS  
Connection for up to three (3), 12-volt...

Controls and Functions
PlasmaWall XP Series Installation/Operation Manual 11 
PREL
IMINARY
Inputs4.USB 
A standard, USB Series “B” connection to a personal computer. (For future use.)
5.HDMI 1 / HDMI 2 (Digital) 
HDCP-compliant digital video inputs for connecting an HDMI or DVI source.
6.HD1 / HD2 (5 x Analog BNCs) 
Two inputs (five BNCs per input) for connecting standard-definition (SD = 480i/576i), 
enhanced-definition (ED = 480p/576p) or high-definition (HD = 720p/1080i/1080p) 
component video...

Controls and Functions
12 PlasmaWall XP Series Installation/Operation Manual
PREL
IMINARY
2.4 
PlasmaWall Remote 
Control Unit 
Figure 2-7 shows the PlasmaWall remote control, and the paragraphs that follow describe 
its functionality.
Figure 2-7. DHD Controller/PlasmaWall Remote Control
CUST1THXSVC HDMI
1HDMI
2
EXIT
RETURN
16 : 9
4 : 3
(not available on
some models)
1312
3
7
5
9
10 1211
146
8 4
(“CUST 2” on
some models) 

Controls and Functions
PlasmaWall XP Series Installation/Operation Manual 13 
PREL
IMINARY
1.IR OUTPUT INDICATOR 
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.ON / OFF 
Press to turn the display on or off.
3.ENTER 
Press to select a highlighted menu item or confirm a changed setting.
4.Cursor Buttons (, , , )  
Use these buttons to select items or settings, adjust settings or switch display 
patterns.
 
 
When no menu is present on-screen, the UP and DOWN buttons...

Controls and Functions
14 PlasmaWall XP Series Installation/Operation Manual
PREL
IMINARY
10.Aspect Ratio Selection Buttons 
Use the red buttons to select an aspect ratio directly or to enter numeric characters, 
as follows: 
 
 
16:9 (3)  
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.  
 
4:3 (6)  
Scales the input signal to fit 4:3 display mode in the center of the screen.  
 
LETBOX (Letterbox) (9) 
For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen.  
 
V-WIDE...