Roland VersaUV LEC 330 User Manual

59Chapter 4 Maintenance and Adjustment
4-3 Cleaning Using the Cleaning Kit
When the Cleaning Kit Becomes Necessary
Periodic Care and Maintenance
At least once a month, clean the print heads, UV emitter, and other such areas using the cleaning kit. 
When Dot Drop-out or the Like Occur Frequently
When the machine's head-cleaning feature does not correct the problem, clean the print heads using the cleaning kit.
When Hardening of the Ink on Printed Material Is Insufficient 
Clean the UV emitter using...

4-3 Cleaning Using the Cleaning Kit
60Chapter 4 Maintenance and Adjustment
Press.
Open the front cover and remove the maintenance cover. 
Close the front cover and press.
The print-head carriage moves to the left side of the machine, and then the screen 
shown in the figure appears.
Remove the side cover.
Touch the location shown in the figure to discharge any static electricity.
Preparations are complete when this screen appears.
OPEN MAINTE-
NANCE CO VER
FINISHED?
Side cover
Screws Hook
Screws...

4-3 Cleaning Using the Cleaning Kit
61Chapter 4 Maintenance and Adjustment
2.Clean using the cleaning stick. Be especially careful to clean away any fibrous dust (lint).
Moisten the cleaning stick with the cleaning liquid. 
Perform cleaning in the sequence shown in the figure below.
Never touch the nozzle surface.
Clean only the metal frame.Area to clean Gently stroke the sponge.
Never rub with force.
Area to clean
Area to clean
Area to clean
Downloaded From ManualsPrinter.com Manuals 

4-3 Cleaning Using the Cleaning Kit
62Chapter 4 Maintenance and Adjustment
Apply commercially available glass cleaner to the cleaning stick.
Use a new cleaning stick.
Clean the locations shown in the figure.
3.Quit the manual cleaning mode.
Press.
The screen shown in the figure appears.
Attach the side cover.
CLOSE  SIDE
 COVERç
Area to clean Area to clean
Side cover Hook
Screws
Screws
Downloaded From ManualsPrinter.com Manuals 

4-3 Cleaning Using the Cleaning Kit
63Chapter 4 Maintenance and Adjustment
Press.
Close the front cover.
The print-head carriage moves to the right side of the machine, and then the screen 
shown in the figure appears.
Open the front cover and attach the maintenance cover.
Close the front cover.
Press
.
Press .
Press 
 to go back to the original screen.
4.Perform a printing test to verify the results of the procedure.
Perform a printing test to check the results. 
Perform cleaning using the...

64Chapter 4 Maintenance and Adjustment
4-4 Replacing Consumable Parts
Replacing the Wipers
The  wipers  are  components  that  you  use  when  cleaning  the 
print heads. When the screen displays a message like the one 
shown,  it  means  the  item  needs  to  be  replaced.  Replace  with 
new items.
 CAUTION Be sure to perform operations as specified by these instructions, and never touch 
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
1.Display the [REPLACE...

4-4 Replacing Consumable Parts
65Chapter 4 Maintenance and Adjustment
Touch the location shown in the figure to discharge any static electricity.
Preparations are complete when this screen appears.
2.Replace the wipers. Use the included tweezers.
Detach the old wipers. 
Detach the hook and pull up and out. 
Insert the new wipers. 
FINISHED?
Rubber surface 
toward the front 
Felt surface 
toward the rear 
Downloaded From ManualsPrinter.com Manuals 

4-4 Replacing Consumable Parts
66Chapter 4 Maintenance and Adjustment
Attach the hook.
3.Quit the [REPLACE WIPER] menu.
Press
Attach the side cover.
Press.
After  the  process  to  quit  the  wiper  replacement  mode,  the  screen  shown  in  the 
figure appears.
Pressto go back to the original screen.
Perform a printing test to verify the results of the procedure.
 P. 40, "Printing Tests and Cleaning"
CLOSE  SIDE
 COVERç
CLEANING...
>>
MAINTENANCE
REPLACE WIPER
W 736mm
SETUP SHEET...

4-4 Replacing Consumable Parts
67Chapter 4 Maintenance and Adjustment
Replacing the Blade
If the blade becomes dull, replace it with the included replacement blade.
 CAUTION Be sure to perform operations as specified by these instructions, and never touch 
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
 CAUTION  Never touch the tip of the blade with your fingers.
Doing so may result in injury.
1.Enter the blade replacement mode.
Press .
Press 
 several...

4-4 Replacing Consumable Parts
68Chapter 4 Maintenance and Adjustment
Remove the old blade.
Install a new blade. 
Reinstall the blade holder. 
If installed without supporting the screw in this way, cutting quality may become poor.
Tighten the screw.
Tug the blade holder upward to make sure it does not come loose.
Press this pin
Blade holder
Old blade
Screw
Insert until 
the collar is 
flush with the 
surface. Blade holder
Pin
New blade
Downloaded From ManualsPrinter.com Manuals