Roland VersaUV LEC 330 User Manual

109Chapter 5 Feature Reference
5-9 White Ink Features and Printing Methods
Features of White Ink
The  ECO-UV  white  ink  that  this  unit  uses  achieves  high  density  and  concealment,  and  is  capable  of  providing  attractive 
results when white and CMYK inks are overprinted. This ink is suited to printing on transparent media, and lets you create 
results intended to be viewed from the back (the side opposite the printed surface) by reversing the image and changing the 
sequence in which the...

11 0Chapter 5 Feature Reference
5-10 Saving the Printer Settings to Match the Media
Saving Optimized Media Settings As Preset Values
Procedure
Press.
Press.
Press
.
Press.
Use
  t o   s e l e c t   a n y   o n e   f r o m   " N A M E 1 "   t o 
"NAME8."
Press
to save.
The present menu settings are saved in the preset you chose in step.
Press.
Press
to go back to the original screen.
Description
Using the [PRESET ] menu lets you easily change a wide variety of settings to optimize...

5-10 Saving the Printer Settings to Match the Media
111Chapter 5 Feature Reference
Loading a Saved Preset
Procedure
Press.
Press twice.
Use
to  select  the  name  of  a  preset  you  want  to 
load.
Pressto load.
The settings are changed and the screen shown in the figure appears. 
Description
This loads a saved preset. You can select any one of eight types of presets. (When no names have been assigned, you select 
from among NAME1 through NAME8.)
If you load a preset while
is illuminated,goes dark....

11 2Chapter 5 Feature Reference
5-11 Making the Network Settings
Setting the IP Address, Subnet Mask, Etc.
Procedure
Press.
Press
several times.
Press.
Press
.
Press.
Use
to choose the item whose setting you want to 
make. 
Presstwice.
Use
to select the address number.
Press.
Repeat and  to set all the address numbers.
When you have finished making the setting, press
. 
Press.
Press
to go back to the original screen.
Description
Make sure the machine is connected to the network by an Ethernet...

11 3Chapter 5 Feature Reference
5-12 Viewing Information about the Media and the System
Displaying the Amount of Media Remaining 
Procedure
Press.
Press
several times.
Press.
Press
.
Press.
Use
to set the amount of media remaining.
Press
to enable the setting.
Pressto go back to the original screen.
Description
You can display how much of the media in use is left. Once you set the amount of media remaining, the amount remaining is 
displayed at the top menu until it reaches zero. If you cancel the...

5-12 Viewing Information about the Media and the System
11 4Chapter 5 Feature Reference
Description
Setting this to "ENABLE" automatically displays [SHEET REMAIN] whenever you change the media and finish setup. 
This makes it impossible to go on to the next operation unless you redo the setting for the amount remaining. This can be 
useful for keeping you from forgetting to redo the setting when you change the media.
When  you  set  this  to  "ENABLE,"  however,  be  sure  also  to  set...

5-12 Viewing Information about the Media and the System
11 5Chapter 5 Feature Reference
Press .
Press 
 to go back to the original screen.
Description
This prints system information, including a list of setting values.
Viewing the Serial Number, Firmware Version, and Other Information
Procedure
Press .
Press 
 several times.
Press .
Use 
 to choose the information you want to view.
Press .
Press .
Press 
 to go back to the original screen.
Description
You can view the following information.
[MODEL]:...

5-12 Viewing Information about the Media and the System
11 6Chapter 5 Feature Reference
Press .
Press 
 to go back to the original screen.
Description
You can view the following information.
[IP ADDRESS]: IP address
[SUBNET MASK]: Subnet mask
[GATEWAY ADDR.]: Gateway address
[MAC ADDRESS]: MAC address
W 736mm
SETUP SHEET
      R OLL
Downloaded From ManualsPrinter.com Manuals 

11 7Chapter 5 Feature Reference
5-13 Performing Maintenance
Draining Ink and Performing Internal Washing
Procedure
Press .
Press 
 several times.
Press .
Press 
 twice.
Press .
Press 
 twice.
Press 
 to execute.
Description
This drains the ink inside the printer and washes the interior using  cleaning SOL INK cartridges as a preliminary for moving 
the printer or conducting maintenance. This operation requires four unused cleaning SOL INK cartridges. The screen displays 
information such as...

11 8Chapter 5 Feature Reference
5-14 Menu List
Main Menu
MENU
PRESETPRESET
LOAD
PRESET
SAVE
LO AD
NAME1
LO AD
NAME2
  To  the [ CUT TEST PRINT] menu
To the [NAME] menu
LO AD
NAME4
LO AD
NAME6
To  the [NAME8] menu
To the [NAME1] menu
SA VE
NAME1
SA VE
NAME2
SA VE
NAME4
SA VE
NAME6
To  the [NAME8] menu
To the [NAME1] menu
Continue d
Continued
Press
LO AD
NAME3
LO AD
NAME5
LO AD
NAME7
LO AD
NAME8
SA VE
NAME3
SA VE
NAME5
SA VE
NAME7
SA VE
NAME8
Continue d
Downloaded From ManualsPrinter.com Manuals