Roland VersaUV LEC 330 User Manual

Important Notes on Handling and Use 
19
Ink Cartridges 
Ink cartridges come in various types.
 Use a type that is compatible with the printer. Also, be sure to use only genuine items from Roland DG 
Corp. 
Never subject to impact or attempt to disassemble.
 Never drop or shake forcefully. The impact may rupture the internal pouch and cause the ink to leak. 
  Never attempt to disassemble. 
  Never attempt to refill the ink. 
  If ink gets on your hands or clothing, wash it off as soon as possible....

20
Downloaded From ManualsPrinter.com Manuals 

21
Chapter 1  
Introduction
Downloaded From ManualsPrinter.com Manuals 

22Chapter 1 Introduction
1-1 Features
Features of the Machine 
What's the LEC-330? 
The  LEC-330  is  a  printer  that  performs  high-quality  printing  using  ultraviolet  (UV )  inks  and  is  equipped  with  a  cutting 
feature. Not only can you use the unit as either a printer or a cutting machine, but you can also perform printing followed 
immediately by cutting. Also, using the crop-mark feature lets you detach the media after printing, then load it again and 
position it accurately for...

23Chapter1 Introduction
1-2 Part Names and Functions
Printer Unit
Air-intake portThis is where air intake is performed to lessen the characteristic odor 
of ECO-UV inks. A deodorizer must be provided separately. 
 "Setup guide"
Maintenance coverYou remove this when you perform 
cleaning of the print heads.
Main power switch
Power-cord connector
This supplies power to the 
printer.
Status LEDThis flashes yellow while data is be -
ing received from the network.
Link LEDThis lights up green when...

1-2 Part Names and Functions
24Chapter 1 Introduction
Grit rollersThese rollers move the media 
forward and backward.Knife guideTh e   s e p a rat i n g   k n i fe   p a s s e s 
through this when you perform 
media cutoff.Blade protection
This protects the tip of the blade 
during cutting.
PlatenThis is the path over which 
the  media  passes.  A  suc-
tion  fan  that  keeps  the 
media from coming loose 
are built in. 
Pinch rollersThese  clamp  the  media 
when the loading lever is 
pulled back toward...

1-2 Part Names and Functions
25Chapter1 Introduction
Operation Panel
Panel Notation
In this document, the keys and lights on the operation panel are indicated by the following images.
  MENU key
  SETUP key
  ENTER key
  Cursor keys
  PAUSE key
  CLEANING key
  TEST PRINT key
  TEST CUT key
  BASE POINT key
  CUT CONFIG key
  SHEET CUT key
CUT CONFIG key This  displays  the  menu  for 
setting  the  conditions  for 
cutting. 
TEST CUT keyHolding  this  down  for  one 
second  or  longer  performs  a...

1-2 Part Names and Functions
26Chapter 1 Introduction
Media Take-up System
Dancer roller This  maintains  uniform  tension 
for media. 
Take-up unitThis takes up media. 
AUTO switchThis makes the direction of rotation 
for take-up during printing change 
automatically.MANUAL switchYou use this when you want to operate 
the media take-up system manually.
Take-up cable This is connected to the printer.
Downloaded From ManualsPrinter.com Manuals 

27
Chapter 2 
Basic Operation
Downloaded From ManualsPrinter.com Manuals 

28Chapter 2  Basic Operation
2-1 Before Starting Operations
Before Starting the Day's Work
The ingredients in white ink tend to settle. Each day, before starting the day's operations, be sure to carry out the follow-
ing steps. Allowing the ink to stand without carrying out these steps can cause the settled material to harden, resulting in 
malfunction or other problems.   Remove just the white ink cartridges, shake them gently, then reinsert them. 
 The cyan, magenta, yellow, black, and gloss...