Ricoh Mp C4500 Instruction Manual

Stamp
111
3
 Page to Stamp
Sets whether to print the stamp on all pages or only the first page.
All Pages
1st Page Only
❖Stamp Colour:1-4
Sets the colour registered in User Stamp colour (1 to 4).
Yellow
Red
Cyan
Magenta
Green
Blue
Black
Reference
User Stamp, Copy/Document Server Reference
Date Stamp
This section describes the user tools in the Date Stamp menu under Stamp.
❖Format
You can select the date format for Date Stamp mode.
 MM / DD / YYYY
 MM.DD.YYYY
 DD / MM / YYYY
 DD.MM.YYYY
...

Copier / Document Server Features
112
3
❖Size
You can set the Date Stamp size.
Auto
Large
 Middle
Small
❖Superimpose
You can have the Date Stamp printed in white when it overlaps black parts of
the image.
On
Off
❖Stamp Colour
You can set the selected priority colour when printing the date.
Yellow
Red
Cyan
Magenta
Green
Blue
Black 

Stamp
113
3
❖Stamp Setting
Specify how Date Stamp is printed.
Stamp Position
Specify where to print the Date Stamp.
Top Left
Top Centre
 Top Right
Bottom Left
Bottom Centre
 Bottom Right
Stamp Position
You can adjust the position of the Date Stamp within the available ranges
shown below.
Metric version:
Top Left…T/B: 4-144mm, L/R: 4-144mm
Top Centre…T/B: 4-144mm, L/R: 72-72mm
Top Right…T/B: 4-144mm, L/R: 4-144mm
Bottom Left…T/B: 4-144mm, L/R: 4-144mm
Bottom Centre…T/B: 4-144mm, L/R: 72-72mm...

Copier / Document Server Features
114
3
Page Numbering
This section describes the user tools in the Page Numbering menu under Stamp.
❖Stamp Format
You can select the page number format given priority when [Page Numbering]
is pressed.
P1,P2…
 1/5,2/5…
 -1-,-2-…
 P.1,P.2…
1,2…
 1-1,1-2…
❖Font
You can select the page number printed in Page Numbering mode.
Font 1
Font 2
Font 3
❖Size
You can set the size of the stamp printed in Page Numbering mode.
Auto
Large
 Middle
Small
❖Duplex Back Page...

Stamp
115
3
❖Stamp Position
Specify how each of stamp is printed.
Stamp Position
Specify where to print the stamp.
Top Left
Top Centre
 Top Right
Bottom Left
Bottom Centre
 Bottom Right
Stamp Position
You can adjust the position of the stamp within the available ranges shown
below.
Metric version:
Top Left…T/B: 4-144mm, L/R: 4-144mm
Top Centre…T/B: 4-144mm, L/R: 72-72mm
Top Right…T/B: 4-144mm, L/R: 4-144mm
Bottom Left…T/B: 4-144mm, L/R: 4-144mm
Bottom Centre…T/B: 4-144mm, L/R: 72-72mm
Bottom...

Copier / Document Server Features
116
3
❖Page Numbering Initial Letter
You can select the page numbering initial letter between P1, P2.../P.1, P.2...
and S1, S2.../S.1, S.2....
P1, P2.../P.1, P.2...
 S1, S2.../S.1, S.2...
Reference
p.3 “Accessing User Tools” 

Input/Output
117
3 Input/Output
This section describes the user tools in the Input/Output menu under Copier /
Document Server Features.
Default settings are shown in bold type.
❖Switch to Batch
You can select to have Batch mode or SADF mode displayed when you press
the [Special Original] key.
Batch
SADF
❖SADF Auto Reset
In SADF mode, an original must be set within a specified time after the pre-
vious original has been fed.
You can adjust this time from 3 to 99 seconds in increments of 1 second.
The...

Copier / Document Server Features
118
3
❖Staple Position
Specify which Top 2 staples or Bottom shown on the initial display with pri-
ority.
The optional 1000-sheet finisher, 3000-sheet finisher, or booklet finisher is re-
quired to use this function.
Top 1
Centre
Left 2
Top 2
Bottom 1
Slant
Off
❖Punch Type
Specify which punch type (2 holes or 3 holes) has priority to be shown on the
initial display.
The optional 1000-sheet finisher, 3000-sheet finisher, or booklet finisher is re-
quired to use...

Input/Output
119
3
❖Simplified Screen: Finishing Types
You can select which key is displayed with higher priority for Finishing
Types on the Simplified Screen.
Stack
Slant
Top 1
Bottom 1
Left 2
2 Holes Left
3 Holes Left
4 Holes Left
Do not Display
Reference
p.3 “Accessing User Tools”
Orientation-Fixed Paper or Two-Sided Paper, Troubleshooting
Batch mode, Copy/ Document Server Reference
Sort, Copy/ Document Server Reference 

Copier / Document Server Features
120
3Adjust Colour Image
This section describes the user tools in the Adjust Colour Image menu under
Copier / Document Server Features.
Default settings are shown in bold type.
❖Background Density of ADS (Full Colour)
The background density is adjusted to skip the texture and copy. You can ad-
just the background density up to 5 levels when in Full Colour.
Centre of the 5 level adjustment is set by default.
❖Colour Sensitivity
You can adjust the colour specified to...