Ricoh Mp C2003 User Guide

2.Enter the number of copy sets with the number keys.
3.Press [Continue].
Copying starts again.
Sort
89  

Storing Data in the Document Server
The Document Server enables you to store documents being read with the copy feature on the hard disk
of this machine. Thus you can print them later applying necessary conditions.
You can check the stored documents on the Document Server screen. For details about the Document
Server, see page 137 "Storing Data".
1. Press [Store File].
2.Enter a user name, file name, or password if necessary.
3. Specify a folder in which to store the document if necessary.
4....

4. Fax
This chapter describes frequently used facsimile functions and operations. For the information not
included in this chapter, see Fax on the supplied CD-ROM.
Basic Procedure for Transmissions (Memory
Transmission)
This section describes the basic procedure for transmitting documents using Memory Transmission.
You can specify the fax, IP-Fax, Internet Fax, e-mail, or folder destinations. Multiple types of destination
can be specified simultaneously.
• It is recommended that you call the receivers...

3.Make sure [Immed. TX] is not highlighted.
4.Place the original into the ADF.
5. Make the scan settings such as scan size and resolution.
6.Configure the transmission settings such as [TX Mode] as necessary.
7. Specify a destination.
You can enter the destination's number or address directly or select from the Address Book by
pressing the destination key.
If you make a mistake, press the [Clear] key, and then enter again.
8. When sending the same original to several destinations (broadcasting),...

9.If you send documents to Internet Fax or e-mail destinations or enable the E-mail TX
Results function, specify a sender.
10. Press the [Start] key.
Sending Originals Using the Exposure Glass (Memory Transmission)
1. Make sure [Immed. TX] is not highlighted.
2.Place the first page of the original face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press the [Start] key.
6. Place the next original on the exposure glass within 60 seconds when you send...

Registering a Fax Destination
1.Display the initial settings screen.
• When using the standard operation panel Press the [User Tools/Counter] key.
• When using the Smart Operation Panel Press the [Home] key on the top left of the control panel. Flick the screen to the left, and then
press the [User Tools] icon (
) on the Home screen 4.
2. Press [Address Book Mangmnt].
3. Check that [Program / Change] is selected.
4. Press [New Program].
5. Press [Change] under "Name".
The name entry display...

11.Enter the fax number using the number keys, and then press [OK].
12.Specify optional settings such as "SUB Code", "SEP Code", and "International TX Mode".
13. Press [OK].
14. Press [Exit].
15. Close the initial settings screen.
• When using the standard operation panel Press the [User Tools/Counter] key.
• When using the Smart Operation Panel Press [User Tools/Counter] (
) on the top right of the screen.
Deleting a Fax Destination
• If you delete a destination that is a...

You can search by the registered name, user code, fax number, folder name, e-mail address, or IP-Fax destination.
5. Press [Fax Dest.].
6. Press [Change] under "Fax Destination".
7. Press [Delete All], and then press [OK] under "Fax Destination".
8.Press [OK].
9. Press [Exit].
10. Close the initial settings screen.
• When using the standard operation panel Press the [User Tools/Counter] key.
• When using the Smart Operation Panel Press [User Tools/Counter] (
) on the top right of the...

Transmitting while Checking Connection to
Destination (Immediate Transmission)
Using Immediate Transmission, you can send documents while checking the connection to the
destination.
You can specify fax or IP-Fax destinations.
If you specify Internet Fax, e-mail, folder destinations, and group or multiple destinations, the
transmission mode is automatically switched to Memory Transmission.
• It is recommended that you call the receivers and confirm with them when sending important documents.
1. Display...

3.Press [Immed. TX].
4.Place the original into the ADF.
5. Select the scan settings you require.
6. Specify a destination.
If you make a mistake, press the [Clear] key, and then enter again.
7. Press the [Start] key.
Sending Originals Using the Exposure Glass (Immediate Transmission)
1. Press [Immed. TX].
2.Place the first page face down on the exposure glass.
3. Specify a destination.
4. Make the scan settings you require.
5. Press the [Start] key.
6. Place the next original on the exposure glass within...