Ricoh Mp 2000 Service Manual

Adding Toner
85
6
Replacing Toner
This section describes how to replace the toner bottle.
Removing Toner
Inserting Toner
Important
❒Do not shake the removed toner bottle. The remaining toner might scatter.
Note
❒Do not remove the black cap before shaking.
❒Do not remove the inner cap.
ASB025S
ASB004S 

Adding Paper and Replacing Toner
86
6
Sending Fax Messages When Toner Has Run Out
When the machine has run out of toner, the indicator on the display lights. Note
that even if there is no toner left, you can still send fax documents.
Important
❒Communication is not possible if the number of communications executed af-
ter the toner has run out plus the number of communications not listed in the
journal exceeds 200.
AMake sure that the machine is in facsimile mode.
BPress [Exit], and then perform...

Replacing the Transmission Stamp Cartridge
87
6 Replacing the Transmission Stamp 
Cartridge
If the transmission stamp becomes faint, replace the cartridge.
Important
❒This stamp cartridge is used for facsimile and scanner functions.
❒Use the cartridge specified for this machine.
❒Do not add ink to the cartridge by yourself. Neglecting this can cause ink
leakage.
❒Be sure not to dirty your fingers with ink from the cartridge.
AOpen the ADF or ARDF unit.
BOpens the stamp cover.
CPull out the old stamp...

Adding Paper and Replacing Toner
88
6
DInsert the new stamp cartridge.
Insert the cartridge until the metal parts are no longer visible.
EClose the stamp cover.
Hold down the centre part of the cover to make sure that it is closed completely.
FLower the ADF or ARDF unit.
AMI002S
ZEXH100J 

89
7. Clearing Misfeeds
This chapter describes what to do when paper or originals misfeed (become
jammed inside the machine).
Removing Jammed Paper
R WARNING:
R CAUTION:
Important
❒When clearing misfeeds, do not turn off the operation switch. If you do, your
copy settings are cleared.
❒To prevent misfeeds, do not leave any torn scraps of paper inside the machine.
❒If paper misfeeds occur frequently, contact your service representative.
Note
❒More than one misfeed area may be indicated. If this is the...

Clearing Misfeeds
90
7
When A is displayed
 When B is displayed
 When P is displayed (ADF)
ASB005S
ASB006S
ASB007S 

Removing Jammed Paper
91
7
 When P is displayed (ARDF)
 When R is displayed
When Y is displayed
ASB008S
ASB009S
ASB010S 

Clearing Misfeeds
92
7
When Z is displayed
ASB011S 

93
8. Remarks
This chapter describes how to maintain and operate the machine.
Where to Put Your Machine
This section provides precautions for installation, movement and disposal.
Machine Environment
Choose your machines location carefully.
Environmental conditions greatly affect its performance.
Optimum Environmental Conditions
The following describes precautions when locating the machine.
R CAUTION:
R CAUTION:
R CAUTION:
 Temperature: 10-32 °C (50-89.6 °F) (humidity to be 54% at 32 °C, 89.6 °F)
...

Remarks
94
8
Environments to Avoid
 Locations exposed to direct sunlight or other sources of strong light (more
than 1,500 lux).
 Locations directly exposed to cool air from an air conditioner or heated air from a heat-
er. (Sudden temperature changes can cause condensation to form inside the machine.)
 Locations close to machines generating ammonia, such as a diazo copy machine.
 Places where the machine will be subject to frequent strong vibration.
Dusty areas.
 Areas with corrosive gases....