Ricoh Aficio MP 9000 User Manual
Have a look at the manual Ricoh Aficio MP 9000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
Connecting the Machine
28
1
Settings Required to Use Network TWAIN Scanner
This section describes necessary set items for using TWAIN Scanner under the
network environment.
Ethernet
This section describes necessary set items for using network TWAIN Scanner
with Ethernet cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-35.png "Page 36
Connecting the Machine
28
1
Settings Required to Use Network TWAIN Scanner
This section describes necessary set items for using TWAIN Scanner under the
network environment.
Ethernet
This section describes necessary set items for using network TWAIN Scanner
with Ethernet cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface...")
![Page 37
Network Settings
29
1
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using network TWAIN Scanner
with IEEE 1394 interface cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Heading Setting Item Setting Requirements...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-36.png "Page 37
Network Settings
29
1
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using network TWAIN Scanner
with IEEE 1394 interface cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Heading Setting Item Setting Requirements...")
![Page 38
Connecting the Machine
30
1
IEEE 802.11b (wireless LAN)
This section describes necessary set items for using network TWAIN Scanner
with IEEE 802.11b (wireless LAN).
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-37.png "Page 38
Connecting the Machine
30
1
IEEE 802.11b (wireless LAN)
This section describes necessary set items for using network TWAIN Scanner
with IEEE 802.11b (wireless LAN).
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the...")
![Page 39
Network Settings
31
1
Settings Required to Use Document Server
This section describes necessary set items for using Document Server function
under the network environment.
Ethernet
This section describes necessary set items for using Document Server function
with Ethernet cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-38.png "Page 39
Network Settings
31
1
Settings Required to Use Document Server
This section describes necessary set items for using Document Server function
under the network environment.
Ethernet
This section describes necessary set items for using Document Server function
with Ethernet cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface...")
![Page 40
Connecting the Machine
32
1
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using Document Server function
with IEEE 1394 interface cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
IEEE 802.11b (wireless LAN)
This...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-39.png "Page 40
Connecting the Machine
32
1
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using Document Server function
with IEEE 1394 interface cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
IEEE 802.11b (wireless LAN)
This...")
![Page 41
Network Settings
33
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Using Utilities to Make Settings
The network settings can be specified not only on the machine’s control panel
but also using utilities...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-40.png "Page 41
Network Settings
33
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Using Utilities to Make Settings
The network settings can be specified not only on the machine’s control panel
but also using utilities...")
![Page 42
Connecting the Machine
34
1
Interface Settings
Change set values of [Interface Settings] in [System Settings] of this machine by us-
ing Web Image Monitor, SmartDeviceMonitor for Admin, and telnet.
❖[Network]→[Machine IPv4 Address]→[Auto-Obtain (DHCP)]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Machine IPv4 Address]→[Specify]→[IPv4 Address]
Web Image...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-41.png "Page 42
Connecting the Machine
34
1
Interface Settings
Change set values of [Interface Settings] in [System Settings] of this machine by us-
ing Web Image Monitor, SmartDeviceMonitor for Admin, and telnet.
❖[Network]→[Machine IPv4 Address]→[Auto-Obtain (DHCP)]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Machine IPv4 Address]→[Specify]→[IPv4 Address]
Web Image...")
![Page 43
Network Settings
35
1
❖[Network]→[DNS Configuration]→[Specify]→[DNS Server1-3]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[DDNS Configuration]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Domain...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-42.png "Page 43
Network Settings
35
1
❖[Network]→[DNS Configuration]→[Specify]→[DNS Server1-3]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[DDNS Configuration]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Domain...")
![Page 44
Connecting the Machine
36
1
❖[Network]→[Effective Protocol]→[NetWare]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:You can make the IPX/SPX settings if
SmartDeviceMonitor for Admin is communicating with the machine using
TCP/IP.
telnet:Can be used for specifying the setting.
❖[Network]→[Effective Protocol]→[Net BEUI]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-43.png "Page 44
Connecting the Machine
36
1
❖[Network]→[Effective Protocol]→[NetWare]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:You can make the IPX/SPX settings if
SmartDeviceMonitor for Admin is communicating with the machine using
TCP/IP.
telnet:Can be used for specifying the setting.
❖[Network]→[Effective Protocol]→[Net BEUI]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
...")
![Page 45
Network Settings
37
1
❖[Network]→[NW Frame Type]→[Ethernet SNAP]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[SMB Computer Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[SMB Work Group]
Web Image...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-44.png "Page 45
Network Settings
37
1
❖[Network]→[NW Frame Type]→[Ethernet SNAP]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[SMB Computer Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[SMB Work Group]
Web Image...")
![Page 46
Connecting the Machine
38
1
❖[Network]→[Host Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Machine Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394]→[IPv4 Address]→[Auto-Obtain (DHCP)]
Web Image...](http://img.usermanuals.tech/thumb/64/37696/w64_Ricoh_Aficio_MP_9000-45.png "Page 46
Connecting the Machine
38
1
❖[Network]→[Host Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Machine Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394]→[IPv4 Address]→[Auto-Obtain (DHCP)]
Web Image...")
Network Settings 33 1 Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter- face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.52 “Interface Settings” p.62 “File Transfer” Using Utilities to Make Settings The network settings can be specified not only on the machine’s control panel but also using utilities such as Web Image Monitor, SmartDeviceMonitor for Ad- min, and telnet. Note ❒For details about using Web Image Monitor, see Using Web Image Monitor, Network Guide. ❒For details about using SmartDeviceMonitor for Admin, see Using SmartDe- viceMonitor for Admin, Network Guide. ❒For Details about using telnet, see Remote Maintenance, Network Guide. Reference Using Web Image Monitor Network Guide Using SmartDeviceMonitor for Admin Network Guide Remote Maintenance by telnet Network Guide interface settings/Network Permit SSL/TLS Communication As required interface settings/Network Host Name As required interface settings/ IEEE 802.11bCommunication Mode Mandatory interface settings/ IEEE 802.11bSSID Setting As required interface settings/ IEEE 802.11bChannel As required interface settings/ IEEE 802.11bSecurity Method As required interface settings/ IEEE 802.11bTransmission Speed As required Heading Setting Item Setting Requirements Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 34 1 Interface Settings Change set values of [Interface Settings] in [System Settings] of this machine by us- ing Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. ❖[Network]→[Machine IPv4 Address]→[Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Machine IPv4 Address]→[Specify]→[IPv4 Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Machine IPv4 Address]→[Specify]→[Sub-net Mask] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[IPv4 Gateway Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Machine IPv6 Address]→[Manual Configuration Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[IPv6 Stateless Address Autoconfiguration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[DNS Configuration]→[Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Network Settings 35 1 ❖[Network]→[DNS Configuration]→[Specify]→[DNS Server1-3] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[DDNS Configuration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Domain Name]→[Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Domain Name]→[Specify] →[Domain Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[WINS Configuration]→[WINS Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[WINS Configuration]→[Scope ID] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Effective Protocol]→[IPv4] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:You can make the TCP/IP settings if SmartDeviceMonitor for Admin is communicating with the machine using IPX/SPX. telnet:Can be used for specifying the setting. ❖[Network]→[Effective Protocol]→[IPv6] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:You can make the TCP/IP settings if SmartDeviceMonitor for Admin is communicating with the machine using IPX/SPX. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 36 1 ❖[Network]→[Effective Protocol]→[NetWare] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:You can make the IPX/SPX settings if SmartDeviceMonitor for Admin is communicating with the machine using TCP/IP. telnet:Can be used for specifying the setting. ❖[Network]→[Effective Protocol]→[Net BEUI] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Effective Protocol]→[AppleTalk] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[NCP Delivery Protocol] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[Network]→[NW Frame Type]→[Auto Select] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[NW Frame Type]→[Ethernet II] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[NW Frame Type]→[Ethernet 802.2] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[NW Frame Type]→[Ethernet 802.3] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Network Settings 37 1 ❖[Network]→[NW Frame Type]→[Ethernet SNAP] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[SMB Computer Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[SMB Work Group] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Ethernet Speed] Web Image Monitor:Cannot be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[Network]→[LAN Type]→[Ethernet] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[LAN Type]→[IEEE 802.11b] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Permit SNMPv3 Communication] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Permit SSL/TLS Communication] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 38 1 ❖[Network]→[Host Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Machine Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[IPv4 Address]→[Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[IPv4 Address]→[Specify]→[Machine IPv4 Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[IPv4 Address]→[Specify]→[Sub-net Mask] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[DDNS Configuration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[IPv4 over 1394] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[WINS Configuration]→[WINS Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Network Settings 39 1 ❖[IEEE 1394]→[WINS Configuration]→[Scope ID] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[Host Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[Domain Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b]→[Communication Mode] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b]→[SSID Setting] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b]→[Channel] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b]→[Security Method] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b]→[Transmission Speed] Web Image Monitor:Cannot be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 40 1 ❖[File Transfer]→[Delivery Option] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[SMTP Server]→[Server Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[SMTP Server]→[Port No.] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[SMTP Authentication] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[POP before SMTP] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Reception Protocol] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[POP3/IMAP4 Settings]→[Server Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[POP3/IMAP4 Settings]→[Encryption] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Network Settings 41 1 ❖[File Transfer]→[Administrators E-mail Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[E-mail Communication Port] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[E-mail Reception Interval] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Max. Reception E-mail Size] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[E-mail Storage in Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Default User Name/Password (Send)]→[SMB User Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Default User Name/Password (Send)]→[SMB Password] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Default User Name/Password (Send)]→[FTP User Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 42 1 ❖[File Transfer]→[Default User Name/Password (Send)]→[FTP Password] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Default User Name/Password (Send)]→[NCP User Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Default User Name/Password (Send)]→[NCP Password] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Program/Change/Delete E-mail Message]→[Program/Change] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Program/Change/Delete E-mail Message]→[Delete] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Scanner Resend Interval Time] Web Image Monitor:Cannot be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Number of Scanner Resends] Web Image Monitor:Cannot be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals