Ricoh Aficio MP 9000 User Manual

							113
4. Copier/Document Server
Features
This chapter describes various items of [Copier/Document Server Features] avail-
able in this machine.
General Features
This section describes various items of [General Features] under [Copier/Document
Server Features].
Default settings are shown in bold type.
For the procedure for accessing the [Copier/Document Server Features], see Access-
ing User Tools (System Settings).
❖Auto Image Density Priority
You can set whether Auto Image Density is “On” or “Off” when the machine
is turned on, reset, or modes are cleared.
Text
On
Off
Text/Photo
On
Off
Photo
On
Off
Pale
On
Off
 General Copy
On
Off
❖Original Orientation in Duplex Mode
You can set the original orientation when making two-sided copies.
Top to Top
Top to Bottom
❖Copy Orientation in Duplex Mode
You can set the copy orientation when making two-sided copies.
Top to Top
Top to Bottom
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
114
4
❖Reserve Job Mode
You can set whether to reset the mode to the initial state or return to the mode
in use before the reserved operation was started when you return to the initial
screen after reserved copying finishes.
 Reset
Previous job
❖Reservation Screen Auto-off Timer
You can set the time required until the display is switched to the reserved first
job display after reservation is set.
If you select “Switch”, use the numbers keys to enter the time (10-99 seconds).
The default setting is 15 seconds.
Yes
No
❖Max. Copy Quantity
The maximum copy quantity can be set between 1 and 9999.
The default setting is 9999 sheets.
❖Original counter reset key
You can set whether to enable the document counter reset key.
On
Off
❖Auto Tray Switching
When the paper runs out during copying, it can be automatically fed from a sub-
stitute paper feed tray, irrespective of the orientation of paper in that tray – pro-
vided it is the same size as that set in the other paper feed tray during automatic
paper selection. This function is called “Auto Tray Switching”. You can set
whether to perform the Auto Tray Switching.
With Image Rotation
You can copy using the Auto Tray Switching function. Depending on the
function being performed rotation may not be possible.
 Without Image Rotation
You can make continuous copies provided paper of the same size and ori-
entation is loaded. The “Supply paper” message appears when paper of
the same size and orientation runs out. Copying is interrupted when this
happens.
Off
The “Supply paper” message appears when paper runs out. Copying is in-
terrupted when this happens.
Downloaded From ManualsPrinter.com Manuals 
						

							General Features
115
4
❖Text
You can adjust the edges of finished image.
The outline of a character becomes soft when you select Soft. The outline of
a character can be sharply copied when you select Sharp.
Copy Quality
Soft
Normal
Sharp
 Custom Setting
Image Density
Light
Normal
Dark
❖Text/photo
You can select which has priority, photographs or characters, when an origi-
nal contains both.
If you select “Normal”, character and photo quality is balanced in the copy.
Copy Quality
Photo priority
Normal
Text Priority
 Custom Setting
Image Density
Light
Normal
Dark
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
116
4
❖Photo
You can adjust the quality of finished images according to the type of photo original.
“Printed photo” is set for magazine and catalog photo originals. You can
smooth photos by selecting “Printed photo”.
Glossy Photo is set for the silver-salt photos printed from photo film. 
If you select “Normal”, you can finish characters that exist together in a photo
block. 
Copy Quality
Printed photo
Normal
 Glossy Photo
 Custom Setting
Image Density
Light
Normal
Dark
❖Pale
You can adjust the image quality of a pale original so the copy is at normal density.
Copy Quality
Soft
Normal
Sharp
 Custom Setting
Image Density
Light
Normal
Dark
❖Generation Copy
You can adjust the image quality to prevent characters in the copy becoming too
thick.
Copy Quality
Soft
Normal
Sharp
 Custom Setting
Image Density
Light
Normal
Dark
Downloaded From ManualsPrinter.com Manuals 
						

							General Features
117
4
❖Dark Background
You can set whether Dark Background can be selected as an original type.
On
Off
❖Panel Features Default
You can set which items will appear as the function buttons on the basic dis-
play.
Off
 Reduce/Enlarge
 Dup./Combine/Series
 Edit Image
 Cover/Slip Sheet
Stamp
 Output/Customize Function/Finisher
❖Image Adjustment Priority
You can set the items, to be preferentially displayed, to the function buttons
on the basic display.
Off
Erase Inside
 Edit Image
❖Paper Display
You can choose to have the available paper trays and sizes shown on the ini-
tial display.
Hide
Display
❖Original Type Display
You can have the original types shown on the initial display.
Hide
Display
❖Special Original Display
You can set whether to show the original types on the initial display.
On
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
118
4
❖Special Original Display Defaults
You can set up to three items for displaying on the initial display from five
items below.
Mixed Sizes
Batch
SADF
 Thin Paper
Original Size
❖Tone: Original Remains
You can set whether to use a buzzer to alert you when you forget to remove
an original.
On
Off
If the “Panel key sound” during system settings is set to “Off”, this function
is invalidated even if it is set to “On”.
❖Job End Call
You can set whether to generate a buzzer sound (“pi”) when a copy is com-
pleted.
If “Panel key sound” when performing system settings is set to “On”, the
buzzer sounds four times if copying is interrupted because the paper has run
out or become jammed. This notifies you that the copy job could not be com-
pleted.
On
Off
❖Connect Copy Key Display
You can set whether to display the [Connect Copy]. If you select Off, the key
does not appear and a master unit cannot be obtained.
On
Off
❖Switch Original Counter Display
You can set whether to count the two-sided documents by number of sheets
or pages.
Original Sheet Counter
 Original Page Counter
Downloaded From ManualsPrinter.com Manuals 
						

							General Features
119
4
❖Customize Function: Copier
A maximum of four often-used functions can be registered to the function
keys.
Off
Mixed Sizes
Batch
SADF
 Thin Paper
❖Customize Function: Document Server Storage
A maximum of four often-used functions can be registered to the function
keys. Registered functions can also be changed.
Off
Mixed Sizes
Batch
SADF
 Thin Paper
Reference
p.43 “Panel Key Sound”
Selecting the Original Type Setting, Copy/ Document Server Reference
Adjusting Copy Image Density, Copy/ Document Server Reference
Selecting Copy Paper, Copy/ Document Server Reference
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
120
4Reproduction Ratio
This section describes various items of [Reproduction Ratio] under [Copier/Docu-
ment Server Features].
❖Shortcut R/E
You can register up to two frequently used Reduce/Enlarge ratios other than
the fixed Reduce/Enlarge ratio and have them shown on the initial display.
You can also change registered Reduce/ Enlarge ratios.
Metric version
 25%
 50% (A3→A5, F→A5)
 65% (A3→F)
 71% (A3→A4, A4→A5)
 75% (B4→F4)
 82% (F→A4, B4→A4)
 93%
 115% (B4→A3)
 122% (F→A3, A4→B4)
 141% (A4→A3, A5→A4)
 200% (A5→A3)
 400%
 User R/E Ratio (25-400%)
Off
Default:
F1: 71%
F2: 141%
Downloaded From ManualsPrinter.com Manuals 
						

							Reproduction Ratio
121
4
Inch version
 25%
 50% (11”×17”→5
1/2”×81/2”)
 65% (11”×17”→8
1/2”×11”)
 73% (11”×15”→8
1/2”×11”)
 78% (8
1/2”×14”→81/2”×11”)
 85% (F→8
1/2”×11”)
 93%
 121% (8
1/2”×14”→11”×17”)
 129 (%8
1/2”×11”→11”×17”)
 155% (8
1/2”×81/2”→81/2”×14”)
 200% (5
1/2×81/2→11×17)
 400%
 User R/E Ratio (25-400%)
Off
Default:
F1: 73%
F2: 155%
❖R/E Ratio
You can specify the enlargement and reduction ratios that appear if [Re-
duce/Enlarge] is pressed on the copier screen.
Downloaded From ManualsPrinter.com Manuals 
						

							Copier/Document Server Features
122
4
Metric version
 25%
 50% (A3→A5, F→A5)
 65% (A3→F)
 71% (A3→A4, A4→A5)
 75% (B4→F4)
 82% (F→A4, B4→A4)
 93%
 115% (B4→A3)
 122% (F→A3, A4→B4)
 141% (A4→A3, A5→A4)
 200% (A5→A3)
 400%
 User R/E Ratio (25-400%)
Inch version
 25%
 50% (11”×17”→5
1/2”×81/2”)
 65% (11”×17”→8
1/2”×11”)
 73% (11”×15”→8
1/2”×11”)
 78% (8
1/2”×14”→81/2”×11”)
 85% (F→8
1/2”×11”)
 93%
 121% (8
1/2”×14”→11”×17”)
 129% (8
1/2”×11”→11”×17”)
 155% (8
1/2”×81/2”→81/2”×14”)
 200% (5
1/2×81/2→11×17)
 400%
 User R/E Ratio (25-400%)
Downloaded From ManualsPrinter.com Manuals