Ricoh Aficio MP 9000 User Manual

							Connecting to the Interfaces
13
1
Note
❒Select [802.11 Ad-hoc] mode when connecting Windows XP as a wireless LAN
client using Windows XP standard driver or utilities, or when not using the
infrastructure mode.
❒For details about how to make settings of wireless LAN from the control pan-
el on the machine, see IEEE 802.11b.
❒For details about how to make settings of wireless LAN from other than the
control panel on the machine, see Using Utilities to Make Settings.
❒For details about the setting items, see IEEE 802.11b.
Reference
p.59 “IEEE 802.11b”
p.33 “Using Utilities to Make Settings”
Checking the Connection
Check the wireless LAN connection.
Make sure the LED of the IEEE 802.11b interface unit is lit.
❖When using in infrastructure mode
1.If [LAN Type] on the [Interface Settings] / [Network] screen is not set to [IEEE
802.11b], it does not light, even if the main power is on.
2.If it is connected properly to the network, the LED is green when in infra-
structure mode. If the LED is blinking, the machine is searching for devices.
ZGDH600J
1
2
Downloaded From ManualsPrinter.com Manuals 
						

							Connecting the Machine
14
1
❖When using in ad-hoc mode / 802.11 ad-hoc mode
1.If the IEEE 802.11b interface unit is working, it is lit in orange.
2.If it is connected properly to the network, the LED is green when in ad-hoc
mode or 802.11 ad-hoc mode. If the LED is blinking, the machine is searching
for devices. The LED will light after a few seconds.
Print the configuration page to verify settings.
Note
❒For more information about printing a configuration page, see Print List.
Reference
p.158 “Printing the configuration page”
Checking the Signal
When using in infrastructure mode, you can check the machines radio wave sta-
tus using the control panel.
APress [System Settings].
BPress [Interface Settings].
CPress [IEEE 802.11b].
DPress [Wireless LAN Signal].
The machines radio wave status appears.
EAfter checking radio wave status, press [Exit].
FPress the {User Tools} key to return to the User Tools menu.
Note
❒To check the radio wave status, press [IEEE 802.11b] under [LAN Type] on the
[Network] screen.
ZGDH600J
1
2
Downloaded From ManualsPrinter.com Manuals 
						

							Network Settings
15
1 Network Settings
This section describes the network settings you can change with User Tools (Sys-
tem Settings). Make settings according to functions you want to use and the in-
terface to be connected.
Important
❒These settings should be made by the systems administrator, or after consult-
ing with the systems administrator.
Settings Required to Use the Printer
This section lists the settings required for using the printer function.
Ethernet
This section lists the settings required for using the printer function with an Eth-
ernet connection.
For details about specifying the settings, see Interface Settings and File Transfer.
Heading Setting Item Setting Requirements
interface settings/Network Machine IPv4 Address Mandatory
interface settings/Network IPv4 Gateway Address As required
interface settings/Network Machine IPv6 Address As required
interface settings/Network IPv6 Gateway Address As required
interface settings/Network IPv6 Stateless Address Autoconfigu-
rationAs required
interface settings/Network DNS Configuration As required
interface settings/Network DDNS Configuration As required
interface settings/Network Domain Name As required
interface settings/Network WINS Configuration As required
interface settings/Network Effective Protocol Mandatory
interface settings/Network NCP Delivery Protocol As required
interface settings/Network NW Frame Type As required
interface settings/Network SMB Computer Name As required
interface settings/Network SMB Work Group As required
interface settings/Network Ethernet Speed As required
interface settings/Network LAN Type Mandatory
interface settings/Network Permit SNMPv3 Communication As required
interface settings/Network Permit SSL/TLS Communication As required
interface settings/Network Host Name As required
Downloaded From ManualsPrinter.com Manuals 
						

							Connecting the Machine
16
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when optional wireless LAN board is installed. If Eth-
ernet and IEEE 802.11b (wireless LAN) are both connected, the selected inter-
face has priority.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using Printer with IEEE 1394 inter-
face cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒[IEEE 1394]appears when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
interface settings/Network Machine Name As required
Heading Setting Item Setting Requirements
interface settings/IEEE 1394 IPv4  Address Mandatory
interface settings/IEEE 1394 DDNS  Configuration As required
interface settings/IEEE 1394 Host Name As required
interface settings/IEEE 1394 Domain Name As required
interface settings/IEEE 1394 WINS  Configuration As required
interface settings/IEEE 1394 IPv4  over 1394 Mandatory
interface settings/Network IPv4 Gateway Address As required
interface settings/Network DNS Configuration As required
interface settings/Network Effective Protocol MandatoryHeading Setting Item Setting Requirements
Downloaded From ManualsPrinter.com Manuals 
						

							Network Settings
17
1
IEEE 802.11b (wireless LAN)
This section describes necessary set items for using Printer with IEEE 802.11b
(wireless LAN).
For details about specifying the settings, see Interface Settings and File Transfer.
Heading Setting Item Setting Requirements
interface settings/Network Machine IPv4 Address Mandatory
interface settings/Network IPv4 Gateway Address As required
interface settings/Network Machine IPv6 Address As required
interface settings/Network IPv6 Gateway Address As required
interface settings/Network IPv6 Stateless Address Autoconfigu-
rationAs required
interface settings/Network DNS Configuration As required
interface settings/Network DDNS Configuration As required
interface settings/Network Domain Name As required
interface settings/Network WINS Configuration As required
interface settings/Network Effective Protocol Mandatory
interface settings/Network NCP Delivery Protocol As required
interface settings/Network NW Frame Type As required
interface settings/Network SMB Computer Name As required
interface settings/Network SMB Work Group As required
interface settings/Network LAN Type Mandatory
interface settings/Network Permit SNMPv3 Communication As required
interface settings/Network Permit SSL/TLS Communication As required
interface settings/Network Host Name As required
interface settings/Network Machine Name As required
interface settings/
IEEE 802.11bCommunication Mode Mandatory
interface settings/
IEEE 802.11bSSID Setting As required
interface settings/
IEEE 802.11bChannel As required
interface settings/
IEEE 802.11bSecurity Method As required
interface settings/
IEEE 802.11bTransmission Speed As required
Downloaded From ManualsPrinter.com Manuals 
						

							Connecting the Machine
18
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Settings Required to Use E-mail Function
This section describes necessary set items for sending e-mail.
Ethernet
This section describes necessary set items for sending e-m a i l  w i t h  E t h e r n e t  c a b l e .
For details about specifying the settings, see Interface Settings and File Transfer.
Heading Setting Item Setting Requirements
interface settings/Network Machine IPv4 Address Mandatory
interface settings/Network IPv4 Gateway Address Mandatory
interface settings/Network DNS Configuration As required
interface settings/Network DDNS Configuration As required
interface settings/Network Domain Name As required
interface settings/Network WINS Configuration As required
interface settings/Network Effective Protocol Mandatory
interface settings/Network Ethernet Speed As required
interface settings/Network LAN Type Mandatory
interface settings/Network Permit SNMPv3 Communication As required
interface settings/Network Permit SNMPv3 Communication As required
interface settings/Network Host Name As required
File Transfer SMTP Server Mandatory
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required
File Transfer POP3/IMAP4 Settings As required
File Transfer Administrators E-mail Address As required
File Transfer E-mail Communication Port As required
File Transfer Program/Change/
Delete E-mail MessageAs required
Downloaded From ManualsPrinter.com Manuals 
						

							Network Settings
19
1Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for[Reception Proto-
col] and [POP3/IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for sending e-mail with IEEE 1394 in-
terface cable.
For details about specifying the settings, see Interface Settings and File Transfer.
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
Heading Setting Item Setting Requirements
interface settings/IEEE 1394 IPv4  Address Mandatory
interface settings/IEEE 1394 DDNS  Configuration As required
interface settings/IEEE 1394 Host Name As required
interface settings/IEEE 1394 Domain Name As required
interface settings/IEEE 1394 WINS  Configuration As required
interface settings/IEEE 1394 IPv4  over 1394 Mandatory
interface settings/Network IPv4 Gateway Address Mandatory
interface settings/Network DNS Configuration As required
interface settings/Network Effective Protocol Mandatory
File Transfer SMTP Server Mandatory
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required
File Transfer POP3/IMAP4 Settings As required
File Transfer Administrators E-mail Address As required
File Transfer E-mail Communication Port As requiredHeading Setting Item Setting Requirements
Downloaded From ManualsPrinter.com Manuals 
						

							Connecting the Machine
20
1
Note
❒[IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3/IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
IEEE 802.11b (wireless LAN)
This section describes necessary set items for sending e-mail with IEEE 802.11b
(wireless LAN).
For details about specifying the settings, see Interface Settings and File Transfer.
File Transfer Program/Change/
Delete E-mail MessageAs required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
Heading Setting Item Setting Requirements
interface settings/Network Machine IPv4 Address Mandatory
interface settings/Network IPv4 Gateway Address Mandatory
interface settings/Network DNS Configuration As required
interface settings/Network DDNS Configuration As required
interface settings/Network Domain Name As required
interface settings/Network WINS Configuration As required
interface settings/Network Effective Protocol Mandatory
interface settings/Network LAN Type Mandatory
interface settings/Network Permit SNMPv3 Communication As required
interface settings/Network Permit SSL/TLS Communication As required
interface settings/Network Host Name As required
interface settings/
IEEE 802.11bCommunication Mode Mandatory
interface settings/
IEEE 802.11bSSID Setting As required
interface settings/
IEEE 802.11bChannel As required Heading Setting Item Setting Requirements
Downloaded From ManualsPrinter.com Manuals 
						

							Network Settings
21
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3/IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port].
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
interface settings/
IEEE 802.11bSecurity Method As required
interface settings/
IEEE 802.11bTransmission Speed As required
File Transfer SMTP Server Mandatory
File Transfer SMTP Authentication As required
File Transfer POP before SMTP As required
File Transfer Reception Protocol As required
File Transfer POP3/IMAP4 Settings As required
File Transfer Administrators E-mail Address As required
File Transfer E-mail Communication Port As required
File Transfer Program/Change/
Delete E-mail MessageAs required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required Heading Setting Item Setting Requirements
Downloaded From ManualsPrinter.com Manuals 
						

							Connecting the Machine
22
1
Settings Required to Use Scan to Folder Function
This section describes necessary set items for sending file.
Ethernet
This section describes necessary set items for sending file with ethernet cable.
For details about specifying the settings, see Interface Settings and File Transfer.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Heading Setting Item Setting Requirements
interface settings/Network Machine IPv4 Address Mandatory
interface settings/Network IPv4 Gateway Address Mandatory
interface settings/Network DNS Configuration As required
interface settings/Network DDNS Configuration As required
interface settings/Network Domain Name As required
interface settings/Network WINS Configuration As required
interface settings/Network Effective Protocol Mandatory
interface settings/Network Ethernet Speed As required
interface settings/Network LAN Type Mandatory
interface settings/Network Permit SNMPv3 Communication As required
interface settings/Network Permit SSL/TLS Communication As required
interface settings/Network Host Name As required
File Transfer Scanner Resend Interval Time As required
File Transfer Number of Scanner Resends As required
Downloaded From ManualsPrinter.com Manuals