Ricoh Aficio MP 9000 User Manual

							Items of Tray Paper Settings
103
3
❖The paper types utilizing LCIT RT5000 (A4 LCT)
If the LCIT RT5000 is utilized, the paper types are available as follows:
Do not Display
Recycled Paper
 Special Paper
 Letterhead
 Color Paper 1
 Color Paper 2
Yellow
 Green
Blue
Purple
Ivory
Orange
Pink
Red
Gray
 OHP (Transparency)
Translucent Paper
 Preprinted Paper
 Prepunched Paper
❖The paper types utilizing LCIT RT5010 (A3 LCT)
If the LCIT RT5010 is utilized, the paper types are available as follows:
Do not Display
Recycled Paper
 Special Paper
 Letterhead
 Color Paper 1
 Color Paper 2
Yellow
 Green
Blue
Purple
Ivory
Orange
Pink
Red
Gray
Downloaded From ManualsPrinter.com Manuals 
						

							Tray Paper Settings
104
3
 OHP (Transparency)
Translucent Paper
 Preprinted Paper
 Prepunched Paper
Tab Stock
 Tab Position Shift
 Number of Tabs
❖The paper sizes utilizing LCIT RT5000 (A4 LCT)
If the LCIT RT5000 is utilized, the paper sizes are available as follows:
11×81/2K, 81/2×51/2K, 51/2×81/2L, A4K, A5K, A5L, B5 JISK
Custom Size: 139.0 - 230.0 mm (vertically) and 210.0 - 305.0 mm (horizontally)
❖The paper sizes utilizing LCIT RT5010 (A3 LCT)
If the LCIT RT5010 is utilized, the paper sizes are available as follows:
Metric version: 
Auto Detect, 12×18L, 11×17L, 11×8
1/2K, 81/2×14L,
81/2×11L, 51/2×81/2L, 81/2×51/2K, 81/2×13L, 81/4×13L,
8×13L, 101/2×71/4K, 71/4×101/2L, 11×15K, 10×14L,
81/4×14L, A3L, B4 JISL, A4K, A4L, A5K, A5L, 
B5 JISK, B5 JISL, B6 JISL, A6L, 8KL, 16KK, 16KL
Custom Size: 100.0 - 330.2 mm (vertically) and 139.7 - 458.0 mm (hori-
zontally)
Note
❒The paper width between 100 and 139.7 mm are available only when
the special side fence is utilized.
❒Auto Detect is available for 12×18L and 11×17L, 11×8
1/2K,
51/2×81/2L, 8×13L, A3L, B4 JISL, A4K, A4L, 
B5 JISK, A5K, A5L.
 Inch version: 
Auto Detect, 12×18L, 11×17L, 11×8
1/2K, 81/2×14L,
81/2×11L, 51/2×81/2L, 81/2×51/2K, 81/2×13L, 81/4×13L,
8×13L, 101/2×71/4K, 71/4×101/2L, 11×15K, 10×14L,
81/4×14L, A3L, B4 JISL, A4K, A4L, A5K, A5L, 
B5 JISK, B5 JISL, B6 JISL, A6L
Custom Size: 3.93 - 13.00 inch (vertically) and 5.50 - 18.03 inch (horizontally)
Note
❒The paper width between 3.93 and 5.50 inch are available only when
the special side fence is utilized.
❒Auto Detect is available for 12×18L and 11×17L, 11×8
1/2K, 
81/2×11L, 81/2×51/2K, 51/2×81/2L, 8×13L, A3L, 
B4 JISL, A4K, B5 JISK, A5L.
Downloaded From ManualsPrinter.com Manuals 
						

							Items of Tray Paper Settings
105
3
❖Copying Method in Duplex
 2 Sided Copy
1 Sided Copy
❖Apply Auto Paper Select
Yes
No
❖Designation Sheet 1 - 9
You can specify and display the paper tray to set designation sheets. You can
also specify the display time and copying method for two sided copying.
Display Time
You can select [At Mode Selected] or [Full Time].
 Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖Front Cover
You can specify and display the paper tray to set front cover sheets. You can
also specify the display time and copying method for two sided copying.
Display Time
You can select [At Mode Selected] or [Full Time].
 Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖Back Cover
You can specify and display the paper tray to set back cover sheets. You can
also specify the display time and copying method for two sided copying.
Display Time
You can select [At Mode Selected] or [Full Time].
 Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖Slip Sheets
You can specify and display the paper tray in which to set slip sheets. You
can also specify the display time.
Display Time
You can select [At Mode Selected] or [Full Time].
Downloaded From ManualsPrinter.com Manuals 
						

							Tray Paper Settings
106
3
❖Separation Sheets
You can specify and display the paper tray in which to set slip sheets. You
can also specify the display time.
Display Time
You can select [At Mode Selected] or [Full Time].
❖Tray 7
You can sets the display to show the type of paper loaded the tray 7
This information is used by the print function to automatically select the pa-
per tray.
❖The paper types
Do not Display
Recycled Paper
 Special Paper
 Letterhead
 Color Paper 1
 Color Paper 2
Yellow
 Green
Blue
Purple
Ivory
Orange
Pink
Red
Gray
 OHP (Transparency)
Translucent Paper
 Preprinted Paper
 Prepunched Paper
Tab Stock
 Tab Position Shift
 Number of Tabs
Downloaded From ManualsPrinter.com Manuals 
						

							Items of Tray Paper Settings
107
3
❖The paper sizes
Metric version: 
Auto Detect, 12×18L, 11×17L, 11×81/2K, 81/2×14L,
81/2×11L, 51/2×81/2L, 81/2×51/2K, 81/2×13L, 81/4×13L,
8×13L, 101/2×71/4K, 71/4×101/2L, 11×15K, 10×14L,
81/4×14L, 8×10L, A3L, B4 JISL, A4K, A4L, A5K, A5L,
B5 JISK, B5 JISL, B6 JISL, A6L, 8KL, 16KK, 16KL
Custom Size (when LCIT RT5000 is installed): 100.0 - 305.0 mm (verti-
cally) and 139.7 - 458.0 mm (horizontally)
Custom Size (when LCIT RT5010 is installed): 100.0 - 330.2 mm (verti-
cally) and 139.7 - 458.0 mm (horizontally)
Note
❒The paper width between 100 and 139.7 mm are available only when
the special side fence is utilized.
❒Auto Detect is available for 12×18L and 11×17L, 11×8
1/2K, 
51/2×81/2L, 8×13L, A3L, B4 JISL, A4K, A4L, 
B5 JISK, A5K, A5L.
 Inch version: 
Auto Detect, 12×18L, 11×17L, 11×8
1/2K, 81/2×14L,
81/2×11L, 51/2×81/2L, 81/2×51/2K, 81/2×13L, 81/4×13L,
8×13L, 101/2×71/4K, 71/4×101/2L, 11×15K, 10×14L,
81/4×14L, 8×10L, A3L, B4 JISL, A4K, A4L, A5K, A5L,
B5 JISK, B5 JISL, B6 JISL, A6L
Custom Size (when LCIT RT5000 is installed): 3.93 - 12.00 inch (vertical-
ly) and 5.50 - 18.03 inch (horizontally)
Custom Size (when LCIT RT5010 is installed): 3.93 - 13.00 inch (vertical-
ly) and 5.50 - 18.03 inch (horizontally)
Note
❒The paper width between 3.93 and 5.50 inch are available only when
the special side fence is utilized.
❒Auto Detect is available for 12×18L and 11×17L, 11×8
1/2K, 
81/2×11L, 81/2×51/2K, 51/2×81/2L, 8×13L, A3L, 
B4 JISL, A4K, B5 JISK, A5L.
❖Copying Method in Duplex
 2 Sided Copy
1 Sided Copy
❖Apply Auto Paper Select
Yes
No
❖Thick Paper Setting
On
Off
Downloaded From ManualsPrinter.com Manuals 
						

							Tray Paper Settings
108
3
❖Designation Sheet 1 - 9
You can specify and display the paper tray to set designation sheets. You can
also specify the display time and copying method for two sided copying.
Display Time
You can select [At Mode Selected] or [Full Time].
 Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖Front Cover
You can specify and display the paper tray to set front cover sheets. You can
also specify the display time and copying method for two sided copying.
Display Time
You can select [At Mode Selected] or [Full Time].
 Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖Back Cover
You can specify and display the paper tray to set back cover sheets. You can
also specify the display time and copying method for two sided copying.
Display Time
You can select [At Mode Selected] or [Full Time].
 Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖Slip Sheets
You can specify and display the paper tray in which to set slip sheets. You
can also specify the display time.
Display Time
You can select [At Mode Selected] or [Full Time].
❖Separation Sheets
You can specify and display the paper tray in which to set slip sheets. You
can also specify the display time.
Display Time
You can select [At Mode Selected] or [Full Time].
❖Interposer Upper - Lower
You can sets the display to show the type of paper loaded in each of the trays.
This information is used by the print function to automatically select the pa-
per tray.
Downloaded From ManualsPrinter.com Manuals 
						

							Items of Tray Paper Settings
109
3
❖The paper sizes
Metric version: 
Auto Detect, 12×18L, 11×17L, 11×81/2K, 81/2×14L,
81/2×11L, 51/2×81/2L, 81/2×51/2K, 81/2×13L, 81/4×13K,
8×13K, 101/2×71/4K, 71/4×101/2L, 11×15K, 10×14L,
81/4×14L, 8×10L, A3L, B4 JISL, A4K, A4L, A5K, A5L,
B5 JISK, B5 JISL, 8KL, 16KK, 16KL
Custom Size: 139.7 - 330.2 mm (vertically) and 139.7 - 458.0 mm (hori-
zontally)
Note
❒Auto Detect is available for 12×18L and 11×17L, 11×81/2K, 
51/2×81/2L, 8×13L, A3L, B4 JISL, A4K, A4L, 
B5 JISK, A5K, A5L.
 Inch version: 
Auto Detect, 12×18L, 11×17L, 11×8
1/2K, 81/2×14L,
81/2×11L, 51/2×81/2L, 81/2×51/2K, 81/2×13L, 81/4×13K,
8×13K, 101/2×71/4K, 71/4×101/2L, 11×15K, 10×14L,
81/4×14L, 8×10L, A3L, B4 JISL, A4K, A4L, A5K, A5L,
B5 JISK, B5 JISL
Custom Size: 5.50 - 13.00 inch (vertically) and 5.50 - 18.03 inch (horizon-
tally)
Note
❒Auto Detect is available for 12×18L and 11×17L, 11×81/2K, 
81/2×11L, 81/2×51/2K, 51/2×81/2L, 8×13L, A3L, 
B4 JISL, A4K, B5 JISK, A5L.
❖Designation Sheet 1 - 9
You can specify the paper trays to set designation sheets.
❖Front Cover
You can specify and display the paper tray to set front cover sheets. You can
also specify the display time and copying method for two sided copying.
Display Time
You can select [At Mode Selected] or [Full Time].
 Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
Downloaded From ManualsPrinter.com Manuals 
						

							Tray Paper Settings
110
3
❖Back Cover
You can specify and display the paper tray to set back cover sheets. You can
also specify the display time and copying method for two sided copying.
Display Time
You can select [At Mode Selected] or [Full Time].
 Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
Note
❒When paper of the same type and size is loaded in two different paper trays
and you want to specify tray for 2 Sided Copy. If one of the trays is specified
as the default in Paper Tray Priority, assign 2 Sided Copy to that tray.
❒A   mark appears next to the paper tray if [No] is selected in [Apply Auto Paper
Select].
❒[Apply Auto Paper Select] is effective for the copier function only if [Do not Dis-
play] or [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the tray.
Downloaded From ManualsPrinter.com Manuals 
						

							Tray Paper Setting on Main and Sub-machines
111
3 Tray Paper Setting on Main and Sub-machines
This section explains the Tray Paper Setting on the two machines during Con-
nect Copy.
While combined copying is under way, the {User Tools} keys of the sub-ma-
chines remain disabled. If it is desired to change the defaults, press [Combined
Copying] that appears in reverse video on the control screen of the main machine,
and then, clear the combined copying before making changes.
How the defaults in the Tray Paper Settings of copying of the main and sub-ma-
chines are used in combined copying will be explained. 
❖Paper Tray Priority: Copier (Copier/Document Server)
 The main and sub-machines follow their respective set values.
❖Paper Tray Priority: Printer (Printer)
 The main and sub-machines follow their respective set values.
❖Paper Type: Tray 1 (LCT)
 The main and sub-machines follow their respective set values.
 In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines. 
❖Paper Type: Tray 2 - 3
 The main and sub-machines follow their respective set values.
 In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines. 
❖Paper Type: Tray 4
 The main and sub-machines follow their respective set values.
 In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines. 
Downloaded From ManualsPrinter.com Manuals 
						

							Tray Paper Settings
112
3
❖Paper Type: Tray 5
 The main and sub-machines follow their respective set values.
 In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines. 
❖Paper Type: Tray 6
 The main and sub-machines follow their respective set values.
 In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines. 
❖Paper Type: Tray 7
 The Tray 7 on both of the main and sub-machines utilizes only for the cov-
er sheet and the designation sheet.
❖Paper Type: Interposer Upper - Lower
 The main and sub-machines follow their respective set values.
 In combined copying, only the paper tray corresponding to the paper size,
orientation, and type that are set in common on the main and sub-ma-
chines can be used. To make the most of the combined copying function, it
is advisable that you make the same paper settings on both the main and
sub-machines. 
Downloaded From ManualsPrinter.com Manuals