Ricoh Aficio MP 9000 User Manual

43
2. System Settings
This chapter describes various items of [System Settings] available in this ma-
chine.
General Features
This section describes various items of [General Features] under [System Settings].
Default settings are shown in bold type.
For the procedure of entering the [System Settings], see Accessing User tools
(System Settings).
❖Program/Change/Delete User Text
You can register character strings you use frequently when specifying set-
tings, such as “.com and “Regards.
You can register...

System Settings
44
2
❖Warm–up Beeper (copier/Document Server)
You can have the beeper sound when the machine becomes ready to copy af-
ter leaving Energy Saver mode, or when the power is turned on.
On
Off
❖Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
Up
 Down
❖Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when...

General Features
45
2
❖Interleave Print
You can set the timing for functions to switch when [Print Priority] has been set
to [Interleave].
Default: 10 sheets
Depending on printing time, set values may change.
The timing for functions can be set from 1 to 20 sheets.
❖Status Indicator
You can specify whether the status indicator shows the machine status or not.
On
Off
❖Screen Color Setting
You can select the screen color among from five types.
Blue Type
Blue & Gray Type
Gray Type
Green Type
Red...

System Settings
46
2
❖Output: Document Server (Document Server)
You can specify a tray to which documents are delivered.
Finisher AFE
Finisher Upper Tray
 Finisher Shift Tray
 Booklet Processor
Finisher Booklet Tray
❖Output: Printer (printer)
You can specify a tray to which documents are delivered.
The output trays set on the printer driver have priority over the output tray
specified below.
Finisher AFE
Finisher Upper Tray
 Finisher Shift Tray
 Booklet Processor
Finisher Booklet Tray
❖Paper...

General Features
47
2
❖System Status/Job List Display Time
You can specify how long to display the System Status and Job List display
for.
On
Off
By selecting [On], you can specify a display time between 10 and 999 seconds.
The timing is set to “15 second(s)” by default.
❖Time Interval between Printing Jobs
You can set the length of interval between the end of a job and the start of a
new job.
If you select “Set Time”, enter the time, 0 - 999 seconds (in 1 second incre-
ments), using the number keys....

System Settings
48
2
❖Z-fold position
Set the folding-back position in units of 1 mm when you specify Z-folding.
The machine is shipped from the factory with this value set to 2 mm (metric
version) or 0.1 inch (inch version).
The setting range of the folding position for each paper size is given below:
Metric version
 A3: 2 - 25 mm
 B4 JIS: 2 - 40 mm
 A4: 2 - 10 mm
 11 × 17: 2 - 20 mm
8
1/2 × 14: 2-35 mm
Inch version
 A3: 0.1 - 1.0 inch
 B4 JIS: 0.1 - 1.6 inch
 A4: 0.1 - 0.4 inch
 11 × 17: 0.1...

Timer Settings
49
2 Timer Settings
This section describes various items of [Timer Settings] under [System Settings].
❖Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
Auto Off. The machine status after the Auto Off operation is referred to as
Off mode, or Sleep mode. For the Auto Off Timer, specify the time to
elapse before Auto Off.
The timing is set to 90 minute(s) (Type 2, 3: 120...

System Settings
50
2
❖Printer Auto Reset Timer (printer)
Specifies the time to elapse before the printer function resets.
On
Off
The time can be set from 10 to 999 seconds, using the number keys.
The timing is set to 60 second(s) by default.
❖Scanner Auto Reset Timer (scanner)
Specifies the time to elapse before the scanner function resets.
On
Off
If [Off] is selected, the machine will not automatically switch to the user code
entry screen.
The time can be set from 10 to 999 seconds, using the number...

Timer Settings
51
2
❖Weekly Timer: Monday-Sunday
Set the time to turn on/off the power for each day of the week. 
Power On Time
Power Off Time
Enter the Power On Time and the Power Off Time using the 24-hour system.
Enter the hour and minute using the number keys. 
Downloaded From ManualsPrinter.com Manuals 

System Settings
52
2Interface Settings
This section describes various items of [Interface Settings] under [System Settings].
Network
This section describes various items of [Network] under [Interface Settings].
❖Machine IPv4 Address
Before using this machine in the network environment, you must configure
the IP address and subnet mask.
When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask]
as xxx.xxx.xxx.xxx (x indicates a number).
If you install the optional IEEE 1394 interface...