Ricoh Aficio MP 9000 User Manual
Here you can view all the pages of manual Ricoh Aficio MP 9000 User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 41
![Page 41
Network Settings
33
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Using Utilities to Make Settings
The network settings can be specified not only on the machine’s control panel
but also using utilities...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-40.png "Page 41
Network Settings
33
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Using Utilities to Make Settings
The network settings can be specified not only on the machine’s control panel
but also using utilities...")
Network Settings 33 1 Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter- face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.52 “Interface Settings” p.62 “File Transfer” Using Utilities to Make Settings The network settings can be specified not only on the machine’s control panel but also using utilities...
Page 42
![Page 42
Connecting the Machine
34
1
Interface Settings
Change set values of [Interface Settings] in [System Settings] of this machine by us-
ing Web Image Monitor, SmartDeviceMonitor for Admin, and telnet.
❖[Network]→[Machine IPv4 Address]→[Auto-Obtain (DHCP)]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Machine IPv4 Address]→[Specify]→[IPv4 Address]
Web Image...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-41.png "Page 42
Connecting the Machine
34
1
Interface Settings
Change set values of [Interface Settings] in [System Settings] of this machine by us-
ing Web Image Monitor, SmartDeviceMonitor for Admin, and telnet.
❖[Network]→[Machine IPv4 Address]→[Auto-Obtain (DHCP)]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Machine IPv4 Address]→[Specify]→[IPv4 Address]
Web Image...")
Connecting the Machine 34 1 Interface Settings Change set values of [Interface Settings] in [System Settings] of this machine by us- ing Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. ❖[Network]→[Machine IPv4 Address]→[Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Machine IPv4 Address]→[Specify]→[IPv4 Address] Web Image...
Page 43
![Page 43
Network Settings
35
1
❖[Network]→[DNS Configuration]→[Specify]→[DNS Server1-3]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[DDNS Configuration]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Domain...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-42.png "Page 43
Network Settings
35
1
❖[Network]→[DNS Configuration]→[Specify]→[DNS Server1-3]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[DDNS Configuration]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Domain...")
Network Settings 35 1 ❖[Network]→[DNS Configuration]→[Specify]→[DNS Server1-3] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[DDNS Configuration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Domain...
Page 44
![Page 44
Connecting the Machine
36
1
❖[Network]→[Effective Protocol]→[NetWare]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:You can make the IPX/SPX settings if
SmartDeviceMonitor for Admin is communicating with the machine using
TCP/IP.
telnet:Can be used for specifying the setting.
❖[Network]→[Effective Protocol]→[Net BEUI]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-43.png "Page 44
Connecting the Machine
36
1
❖[Network]→[Effective Protocol]→[NetWare]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:You can make the IPX/SPX settings if
SmartDeviceMonitor for Admin is communicating with the machine using
TCP/IP.
telnet:Can be used for specifying the setting.
❖[Network]→[Effective Protocol]→[Net BEUI]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
...")
Connecting the Machine 36 1 ❖[Network]→[Effective Protocol]→[NetWare] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:You can make the IPX/SPX settings if SmartDeviceMonitor for Admin is communicating with the machine using TCP/IP. telnet:Can be used for specifying the setting. ❖[Network]→[Effective Protocol]→[Net BEUI] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. ...
Page 45
![Page 45
Network Settings
37
1
❖[Network]→[NW Frame Type]→[Ethernet SNAP]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[SMB Computer Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[SMB Work Group]
Web Image...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-44.png "Page 45
Network Settings
37
1
❖[Network]→[NW Frame Type]→[Ethernet SNAP]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[SMB Computer Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[SMB Work Group]
Web Image...")
Network Settings 37 1 ❖[Network]→[NW Frame Type]→[Ethernet SNAP] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[SMB Computer Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[SMB Work Group] Web Image...
Page 46
![Page 46
Connecting the Machine
38
1
❖[Network]→[Host Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Machine Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394]→[IPv4 Address]→[Auto-Obtain (DHCP)]
Web Image...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-45.png "Page 46
Connecting the Machine
38
1
❖[Network]→[Host Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Can be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network]→[Machine Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394]→[IPv4 Address]→[Auto-Obtain (DHCP)]
Web Image...")
Connecting the Machine 38 1 ❖[Network]→[Host Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network]→[Machine Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[IPv4 Address]→[Auto-Obtain (DHCP)] Web Image...
Page 47
![Page 47
Network Settings
39
1
❖[IEEE 1394]→[WINS Configuration]→[Scope ID]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394]→[Host Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394]→[Domain Name]
Web Image Monitor:Can...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-46.png "Page 47
Network Settings
39
1
❖[IEEE 1394]→[WINS Configuration]→[Scope ID]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394]→[Host Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[IEEE 1394]→[Domain Name]
Web Image Monitor:Can...")
Network Settings 39 1 ❖[IEEE 1394]→[WINS Configuration]→[Scope ID] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[Host Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394]→[Domain Name] Web Image Monitor:Can...
Page 48
![Page 48
Connecting the Machine
40
1
❖[File Transfer]→[Delivery Option]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer]→[SMTP Server]→[Server Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer]→[SMTP...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-47.png "Page 48
Connecting the Machine
40
1
❖[File Transfer]→[Delivery Option]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer]→[SMTP Server]→[Server Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer]→[SMTP...")
Connecting the Machine 40 1 ❖[File Transfer]→[Delivery Option] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[SMTP Server]→[Server Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[SMTP...
Page 49
![Page 49
Network Settings
41
1
❖[File Transfer]→[Administrators E-mail Address]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer]→[E-mail Communication Port]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-48.png "Page 49
Network Settings
41
1
❖[File Transfer]→[Administrators E-mail Address]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer]→[E-mail Communication Port]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File...")
Network Settings 41 1 ❖[File Transfer]→[Administrators E-mail Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[E-mail Communication Port] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File...
Page 50
![Page 50
Connecting the Machine
42
1
❖[File Transfer]→[Default User Name/Password (Send)]→[FTP Password]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer]→[Default User Name/Password (Send)]→[NCP User Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used...](http://img.usermanuals.tech/thumb/64/37696/w300_Ricoh_Aficio_MP_9000-49.png "Page 50
Connecting the Machine
42
1
❖[File Transfer]→[Default User Name/Password (Send)]→[FTP Password]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used for specifying the setting.
❖[File Transfer]→[Default User Name/Password (Send)]→[NCP User Name]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Cannot be used...")
Connecting the Machine 42 1 ❖[File Transfer]→[Default User Name/Password (Send)]→[FTP Password] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer]→[Default User Name/Password (Send)]→[NCP User Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used...