Pcs Phone Sanyo Vm4500 User Guide
Have a look at the manual Pcs Phone Sanyo Vm4500 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Airplane Mode When your phone is in Airplane Mode, it cannot send or receive any calls (except for 911 dialing) or access online information. You may still use the phone’s other features, such as Games, Voice Memos, Calendar, etc., while you are in Airplane Mode. To set your phone to Airplane Mode: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Airplane Modeand press . 5.You will see a message on the display. Press or OK(left softkey) to continue. Press Cancel(right softkey) to return to previous menu. 6.Select Onand press . To deactivate this feature, select Offduring step 6. While in Airplane Mode, your phone’s standby screen will display “Phone Off.” TTY Use With PCS Service From Sprint A TTY (also known as a TDD or Text Telephone), is a telecommunications device that allows people who are deaf or hard of hearing, or who have speech or language disabilities, to communicate by telephone. Your phone is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission. Your phone and TTY device will connect via a special cable that plugs into your phone’s headset jack. If this cable was not provided with your TTY device, contact your TTY device manufacturer to purchase the connector cable. When establishing your PCS Service, please call PCS Customer Solutions via the state Telecommunications Relay Service (TRS) by first dialing . Then provide the state TRS with this number: 866-727-4889. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 59
To turn TTY Mode On or Off: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select TTYand press . 5.You will see a message on the display. Press OK(left softkey) to continue. 6.Select Enableor Disableand press . Note:When you connect TTY devices, your phone will display in TTY mode. Note:If TTY mode is enabled, the audio quality of non-TTY devices connected tothe headset jack may be impaired. IMPORTANT NOTICE: 911 Emergency CallingSprint recommends that TTY users make Emergency calls by other means including Telecommunications Relay Services (TRS), analog cellular, and landline communications. Wireless TTY calls to 911 may be corrupted when received by public safety answering points (PSAPs) rendering some communications unintelligible. The problem encountered appears related to TTY equipment or software used by PSAPs. This matter has been brought to the attention of the FCC, and the wireless industry and PSAP community are currently working to resolve this. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 60
Phone Setup Options Shortcut Your phone offers you the option of assigning a shortcut key to a favorite or often-used function. Pressing on the Navigation key in standby mode will launch your user-defined shortcut. To assign your shortcut key: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select My Shortcutand press . 5.Select the menu under My Shortcutand press . 6.Select your desired menu option and press . Press Info(right softkey) during step 5 above to see an information screen. Auto Answer Mode Auto Answer mode allows you to answer calls automatically when your phone is connected to an optional hands-free car kit and headset (sold separately). To activate this feature: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Auto Answerand press . 5.Select Car Kit/Headsetor Speaker Phoneand press . 6.Select either 5 Secondsor 15 Secondsand press . To deactivate this feature, select Offduring step 6 above. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 61
Setting the Open/Close Flip Option This feature enables you to answer an incoming call by opening the f lip or to end a call by closing the f lip. To activate the Open Flip feature: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Open/Close Flipand press . 5.Select Openand press . 6.Select Answer Calland press . To deactivate this feature, select No Actionduring step 6. To activate the Close Flip feature: 1.Follow steps 1-4 above. 2.Select Closeand press . 3.You will see a message on the display. Press OK(left softkey) to continue. 4.Select End Calland press . To deactivate this feature, select Muteduring step 3. Note:This feature does not apply when you are using the speakerphone, a headset, or a car kit. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 62
Setting Any Key Answer This feature allows you to answer incoming calls by pressing any key (except , , , , , , the Side Camera key, or the Navigation key). To activate this feature: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Any Key Answerand press . 5.Select Onand press . To deactivate this feature, select Offduring step 5 above. Setting the Side Key Guard This feature enables you to lock your side keys (Ready Link button, Side Volume key, and Side Call key) while the f lip is closed. To activate this feature: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Side Key Guardand press . 5.Select Onand press . Key Guardappears on the Sub LCD when you press any side key while the f lip is closed. To deactivate this feature, select Offduring step 5 above. Note:This feature does not apply when the flip is open. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 63
Setting Speed Dialing With this feature you can dial Contacts Directory entries with one key press for locations 2-9. Save your memory locations 2-9 for speed dialing your most commonly used phone numbers. Speed Dial numbers must be stored in your Contacts to use this feature. To set Speed Dial: 1.Press to access the main menu. 2.Select Contactsand press . 3.Select Speed Dial #sand press . 4.To select a corresponding speed dial number from 2-9, highlight an unassigned number and press . 5.Select an entry from the list and press . 6.Select the phone number you want to set as a speed dial and press . – or – 1.Press on the Navigation key. 2.Highlight your desired entry by scrolling through the Contacts list and press . 3.Highlight the phone number you want to set as a speed dial and press Options(right softkey). 4.Highlight Set Speed Dialand press . 5.Highlight an unassigned number and press . When you highlight an assigned number and press , you’ll be asked whether you want to overwrite the assigned number. Select Ye sto overwrite or Noto cancel. To cancel a stored speed dial number: 1.Press to access the main menu. 2.Select Contactsand press . 3.Select Speed Dial #sand press . 4.Highlight the stored speed dial number you want to cancel and press . 5.Highlight Unassignand press . To use Speed Dial: From standby mode, just press and hold the appropriate key. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 64
Setting Abbreviated Dialing Abbreviated Dialing is another form of speed dialing. It allows you to dial a number by entering just the last four digits of any number in your Contacts Directory. If the last four digits you enter do not match any stored Contacts entry, the digits are automatically prepended with the area code and prefix you specify. To activate this feature: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Abbrev. Dialand press . 5.Select Enableand press . 6.Enter a six-digit number (area code and prefix) and press or OK(left softkey). To deactivate this feature, highlight Disableduring step 5 above. Tip:If you enter fewer than 6 digits, the display shows a warning message. See“Abbreviated Dialing” on page 25. Headset Mode This feature allows you hands-free phone use. Set the headset mode to Voice Call or Ready Link and press the Turbo Button (the operation button) on the headset to activate useful functions. To set headset mode: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Headset Modeand press . 5.Select Voice Callor Ready Linkand press . Press Info(right softkey) during step 5 above to see the Headset Mode information screen. To deactivate this feature, select Offduring step 5 above. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 65
With the headset:Voice Call:Press the Turbo Button to activate Voice dial. Press twice to redial the last call. Press and hold the button to record a Voice Memo. Ready Link:Press and hold the Turbo Button to redial the last PCS Ready Link call. Sleep Mode This feature helps conserve your battery power by restricting the display. To set sleep mode: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Displayand press . 4.Select Sleep Modeand press . 5.Select Main LCDor Sub LCDand press . 6.Select your desired option, and press . To deactivate this feature, highlight Offduring step 6 above. Setting Message Notification You can see a pop-up message notification when you receive a text message or Voicemail while you are in PCS Vision applications, Browser mode, or Voice Calls. To set message notification: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Messagingand press . 4.Select Display Pop-upand press . 5.Highlight the box and press to check/uncheck the box next to Games/Apps,Browser, or Voice Calls. 6.Press Save(left softkey). Press Info(right softkey) during step 4 above to see the Messages information. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 66
Editing Canned Messages Your phone can store pre-set (canned) messages for use with text messaging and Picture Mail. You can edit your phone’s default canned messages through the Settings menu. (For more information on using canned messages, see pages 141 and 184.) To edit your phone’s canned messages: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Messagingand press . 4.Select Canned Msgsand press . 5.Select the message you want to edit and press . To reset all messages, press Options(right softkey), select Reset All Msgs, and press during step 4 above. 6.Use your keypad to edit the message and press OK(left softkey) or to save your changes.(“Canned Msg Saved” will display.) Note:For information on editing text, see “Entering Text” on page 91. Setting the Current Time To set the current time when you are roaming in an area with no digital network: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Set Time/Dateand press . 5.Set the current time and date and press . Note:This feature is only available when you are in an area with no digitalnetwork available. Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 67
Changing the Menu Language When you first turn your phone on, the menus are displayed in English. To change the menu language to Spanish: 1.Press to access the main menu. 2.Select Settingsand press . 3.Select Othersand press . 4.Select Languageand press . 5.Select Españoland press . Section 2: Understanding Your PCS Phone 2B: Controlling Your Phone’s Settings 68