Pcs Phone Sanyo Vm4500 User Guide
Have a look at the manual Pcs Phone Sanyo Vm4500 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Erasing Voice Memos To erase individual memos: 1.Press to access the main menu. 2.Select Voice Servicesand press . 3.Select Voice Memoand press . 4.Select Playor Play:Speakerand press . 5.Display the memo list, highlight the memo you want to erase, and press Options(right softkey). 6.Select Eraseand press . 7.Select Ye sand press . To erase all voice memos: 1.Follow steps 1-5 above. 2.Select Erase Alland press . 3.Select Ye sand press . – or – 1.Press to access the main menu. 2.Select Voice Servicesand press . 3.Select Voice Memoand press . 4.Select Erase Alland press . 5.Select Ye sand press . Section 2: Understanding Your PCS Phone 2I: Using Your Phone’s Voice Services 129
Setting Up Screen Call This feature enables you to screen incoming calls by using recorded announcements, either one that is pre-recorded or one that you record. You can also record the caller’s message into the Voice Memo list. To listen to the message, see “Reviewing Voice Memos” on page 128. Activating Screen Call To start Screen Call when you have incoming calls: 1.Press to display the options. 2.Highlight Screen Calland press . To set Auto Screen Call: 1.Press to access the main menu. 2.Select Voice Servicesand press . 3.Select Screen Calland press . 4.Select Autoand press . 5.Select Onand press . 6.Set the answering time by using numeric keys or / on the Navigation key. 7.Press or OK(left softkey). (The icon is displayed on the standby display.) Tip:If a new caller’s message is waiting, appears on the display. The memos recorded while activating “Screen Call” are shown with “√” or “!” icon in the list(“√”: once played, “!”: not played yet). Tip:While the caller’s message is being recorded: Pressing stops recordingand disconnects the call, pressing answers the call. Section 2: Understanding Your PCS Phone 2I: Using Your Phone’s Voice Services 130
Selecting an Announcement for Screen Call To select a Screen Call announcement: 1.Press to access the main menu. 2.Select Voice Servicesand press . 3.Select Screen Calland press . 4.Select Announcementand press . 5.Depending on your preference, highlight Pre-Recordedor Customand press . Recording Your Name for a Pre-Recorded Announcement You can use a pre-recorded announcement with or without your name. If you record your name, your phone uses your name to announce that you are not available to answer the call. To record your name: 1.Press to access the main menu. 2.Select Voice Servicesand press . 3.Select Screen Calland press . 4.Select Announcementand press . 5.Select Pre-Recordedand press Edit(right softkey). 6.Select Record Nameand press . If your name has already been recorded, select Ye sor Noto overwrite the existing recording. 7.Press to start the first recording. 8.After the first recording, press again to start the second recording. 9.Press to stop recording. Tip:Recording terminates automatically after 12 seconds. Section 2: Understanding Your PCS Phone 2I: Using Your Phone’s Voice Services 131
Recording a Customized Announcement To record an announcement: 1.Follow steps 1-4 on the previous page. 2.Select Customand press Edit(right softkey). 3.Highlight Recordand press . When an announcement has already been recorded, select Ye sor Noto overwrite the existing recording. 4.Press to start the first recording. 5.After the first recording, press again to start the second recording. 6.Press to stop recording. Tip:Recording terminates automatically after 12 seconds. Reviewing an Announcement To review an announcement: 1.Press to access the main menu. 2.Select Voice Servicesand press . 3.Select Screen Calland press . 4.Select Announcementand press . 5.Select Pre-Recordedor Customand press Edit(right softkey). 6.Highlight Playor Play:Speakerand press . Erasing an Announcement To erase an announcement: 1.Follow steps 1 to 5 above. 2.SelectErase Nameto erase name for Pre-Recorded announcement and press . – or – Select Eraseto erase message for Custom and press . 3.Select Ye sand press . Section 2: Understanding Your PCS Phone 2I: Using Your Phone’s Voice Services 132
Section 2J Using Your Phone’s Camera In This Section Taking Pictures Sending Your Pictures Reviewing Pictures Taking Video Sending Your Video File Reviewing Video Managing Picture MailSM Y our PCS Phone gives you the ability to take full-color digital pictures, view your pictures using the phone’s display, and instantly share them with your family and friends. It’s fun and as easy to use as a traditional point-and-click camera – just take a picture, view it on your phone’s display, and send it to up to ten people, right from your phone. Your pictures may also be uploaded to a Picture Mail SMWebsite for storage or sent to another Website for your personal use. Picture quality is similar to what you see on your computer screen. In addition to taking pictures, you can also take, view, and send videos to your friends and family with your built-in camera. This section explains the features and options of your phone’s built-in PCS Vision Camera. Section 2: Understanding Your PCS Phone 2J: Using Your Phone’s Camera 133
Taking Pictures Taking pictures with your phone’s built-in PCS Camera is as simple as choosing a subject, pointing the lens, and pressing a button. You can activate Camera mode and take pictures whether the phone is open or closed. Taking a Picture With the Phone Open Using the Main LCD: 1.Press to access the main menu. 2.Select Picture&Videoand press to access the Picture & Video menu. 3.Select Cameraand press to activate Camera mode. (Additional user options are available through the Camera mode Optionsmenu. See “Camera Mode Options” on page 137 for more information.) Shortcut:To activate Camera mode, you can also press and hold or the Side Camera key (see illustration on page 8). 4.Using the phone’s main LCD as a viewfinder, aim the camera lens at your subject and hold the camera steady. 5.To take the picture, press , , the Side Camera key, or Capture(left softkey). (Your picture will be saved automatically in your phone.) 6.Press Next(right softkey) to go to the next step. Steps: Send Pictureto send the picture. (See page 141 for details.) Go to Camerato return to Camera mode to take another picture. Uploadto upload the picture you just took to the Picture Mail Website. Depending on your settings, you may be prompted to accept a PCS Vision connection. Go to My Picsto go to the My Pictures menu to check your saved pictures. Assign Caller IDto assign the picture as a Caller ID. Assign Scrn Saverto assign the picture as a Screen Saver. Eraseto erase the picture you just took. Section 2: Understanding Your PCS Phone 2J: Using Your Phone’s Camera 134
Tip:You can return to Camera mode by pressing during step 6. Tip:From Camera mode, press and hold or the Side Camera key to accessVideo mode. See page 146 for taking videos. Using the Sub LCD: 1.Follow steps 1-3 on the previous page. 2.Press Options(right softkey) to display options. 3.Select Self Portraitand press . 4.After reading the message, press or Turn On(left softkey). 5.Using the phone’s Sub LCD as a viewfinder, aim the camera lens at yourself and hold the camera steady. 6.To take the picture, press , , or the Side Camera key. (Your picture will be saved automatically in your phone.) 7.Check the picture on main LCD then follow step 6 on the previous page. Note:When taking a picture with the phone closed, the subject image appears in reverse on the Sub LCD. The captured image will be saved correctly, that is, not reversed. Taking a Picture With the Phone Closed 1.Press and hold the Side Camera key to activate Camera mode. 2.Point the camera lens at your subject. (You can check the picture framing through the Sub LCD.) 3.Press the Side Camera key to take the picture. (Your picture will be saved automatically in your phone.) Note:While you are taking a picture, the backlight turns on even if your backlightis set to Always Off. Note:In some cases, the screen may flicker and the stripes may appear on thedisplay while taking picture or video under fluorescent lighting. Section 2: Understanding Your PCS Phone 2J: Using Your Phone’s Camera 135
Picture Storage The number of pictures you can take may vary depending on resolution, quality, and the subject you take. (See page 139 for resolution and quality.) The following chart is an indication for picture storage. Creating Your Picture MailSMPassword The first time you use any of the Picture Mail management options involving the Picture Mail Website you will need to establish a Picture Mail password through your PCS Phone. This password will also allow you to log in to the Picture Mail Website at picturemail.sprintpcs.comto access and manage your uploaded pictures, video files, and albums. To create your Picture Mail password: 1.Press to access the main menu. 2.Select Picture&Videoand press to access the Picture & Video menu. 3.Select Online Albumsand press . 4.Select View Albumsand press . (You will be prompted to create a password.) 5.Enter a four to eight-digit password and press or OK(left softkey). Tip:Write down your Picture Mail password in a secure place. 6.Please wait while the system creates your account. Once you have received confirmation that your account has been successfully registered, you may upload/send pictures or video files and access the Picture Mail Website. Resolution High Medium LowQualityCount of pictures you can take Fine only 31 Normal only 52 Economy only 78 Fine only 124 Normal only 150 Economy only 150 Fine only 150 Normal only 150 Economy only 150 Section 2: Understanding Your PCS Phone 2J: Using Your Phone’s Camera 136
Camera Mode Options When the phone is open and in Camera mode, several user options are available. Press Options(right softkey) to display additional user options: Flashto activate the f lash function. (See “Setting the Flash Function” on the next page for details.) Self-timerto activate the camera’s timer function. (See “Setting the Self-timer” on the next page for details.) Fun Toolsto select an option from the following to set picture frames and color tone. Fun Framesto select your favorite fun picture frame to decorate your picture. Color Toneto select a color tone for the picture. (Normal, Sepia, or Black & White.) Image Controlsto select an option from the following. Brightnessto select Autoor Manualbrightness control. If you select Manual, press the Navigation key right (increase) or left (decrease) to select a setting and press to apply the desired setting. White Balanceto adjust white balance based on changing conditions. Select from Auto,Sunny,Cloudy,Tungsten, Fluorescent, or Manual. Camera Settingsto select Resolution,Zoom,Quality,Shutter Sound, Adjust Backlight, or Status Area. See “Selecting Camera Settings” on page 139 for details. Self Portraitto switch the viewfinder to the Sub LCD. Take a picture of yourself by checking the view on the Sub LCD. (See “Using the Sub LCD” on page 147 for details.) Go to My Picsto go to your phone’s picture storage folder. Go to Camcorderto switch to Video mode. (See “Taking Videos” on page 146 for details.) Section 2: Understanding Your PCS Phone 2J: Using Your Phone’s Camera 137
Setting the Flash Function To activate the f lash function to take pictures clearly in low light: 1.With the phone open and in Camera mode, select Options (right softkey). 2.Select Flashand press . 3.Select an option from the following and press . On This Shotto activate the f lash for one shot. On Alwaysto activate the f lash all the time. 4.Take a picture by using the phone’s main LCD as a viewfinder. To deactivate this feature, select Offduring step 3. Tip:The flash function will automatically be Off when you take a picture with theclamshell closed. Setting the Self-timer To activate the Self-timer and get yourself in on the picture: 1.With the phone open and in Camera mode, select Options (right softkey). 2.Highlight Self-timerand press . 3.Highlight the length of delay you want the timer to use (10 Secondsor 5 Seconds) and press . 4.Press Start(left softkey) when you are ready to start the timer. ( appears on the lower left portion of the main LCD during the Self-timer countdown.) 5.Get ready for the picture. When the timer is down to three seconds, the Self-timer icon will turn red and the phone will begin to beep. To cancel the Self-timer after it has started: Press Cancel(right softkey). Note:While the Self-timer is active, all keys are disabled except , , andCancel(right softkey). Tip:You can also activate the Self-timer in Video mode with same steps. Section 2: Understanding Your PCS Phone 2J: Using Your Phone’s Camera 138